Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ7KH240HAHQ · Samsung

Samsung SM883 240GB SATA SSD (MZ7KH240HAHQ)

240 GB 2.5-inch SATA mixed-use SSD, ordering code MZ7KH240HAHQ-00005

New Used
From $120.00
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ7KH240HAHQ
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 240 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type MLC
Endurance (DWPD) 3
TBW 1,314 TB
Sequential Read 540 MB/s
Sequential Write 480 MB/s
Random Read IOPS 97K IOPS
Random Write IOPS 22K IOPS
Power 2.8 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption SED
Condition New · Used

Frequently Asked Questions

The catalogue code is MZ7KH240HAHQ and the ordering code is MZ7KH240HAHQ-00005. The trailing -00005 is the General SED customer code, a security and packing designation rather than a capacity or endurance variant, so both strings describe the same 240 GB 2.5-inch 7 mm SATA drive with 1,314 TBW. Quote the full ordering code on a PO and we will ship against it.

On performance, yes: 540/480 MB/s against 410/450, 97K/22K random IOPS against 90K/10K, and documented tail latency where the older part published none. On endurance it is slightly lower, 1,314 TBW at 3.0 DWPD against 1,540 at 3.5 DWPD. Buy the 883 when latency and consistency matter, the 863a when the deployment is endurance-bound and price decides.

Samsung rated this generation at 3.0 drive-writes-per-day across the whole range, where the 863a family carried a 3.6 brochure figure that worked out to 3.5 from its published TBW. The 883 figure is exact: TBW = DWPD x 365 x 5 x capacity gives 1,314 TB for 240 GB. In practice 3.0 DWPD is 720 GB of writes a day for five years, which is far more than a boot, journal or cache volume will use.

Roles where the bytes are few but the writes never stop: a mirrored boot pair on a hypervisor host, a journal or WAL volume, a write-back cache in front of slower storage, an appliance system disk that logs continuously, or a ZFS special-vdev member. It is too small to be a data tier, and it is the wrong part for a read-mostly boot volume where a read-intensive drive costs less.

Yes on power loss, with a caveat: the drive uses capacitor hold-up to flush its DRAM write cache to NAND and rebuild the mapping table within ten seconds, which Samsung documents in its SPOR chapter, but no hold-up time is published, so it covers a brief interruption rather than guaranteeing a flush window in every condition. There is no TCG Opal 2.0 claim for this part; the -00005 code is a General SED device with an AES 256-bit engine.

No. Samsung lists the SM883 as discontinued, so supply is decommissioned server stock and remaining channel inventory, and at 240 GB that pool is finite. Every drive we ship carries a 1-year warranty from us, and units are pull-tested with the SMART readout kept on file, including the wear indicator.

Samsung SM883 240 GB, 2.5-inch 7 mm SATA, catalogue code MZ7KH240HAHQ, ordering code MZ7KH240HAHQ-00005. The 2018 mixed-use successor to the SM863a: 540 MB/s sequential read, 480 MB/s sequential write, 97K random read and 22K random write IOPS, and 1,314 TBW — 3.0 drive-writes-per-day over five years — on 2-bit MLC V-NAND behind a Samsung Maru controller. Stocked new or as tested pulls with a 1-year warranty from us.

Two lines in that list run against the usual generation-over-generation story. Read performance is up by roughly a third against the SM863a at the same capacity — 540 MB/s against 410, 97K against 90K IOPS, 22K random write against 10K — but the endurance rating is lower: 1,314 TBW at 3.0 DWPD against 1,540 at 3.5. Samsung traded a slice of write budget for a faster and far more consistent drive, and the power budget moved with it: 2.8 W active read, 3.7 W active write, against 2.5 W and 3 W on the older part.

The change that matters more than either number is not on the performance line at all. This generation documents what happens when power fails: on interruption the drive dumps its DRAM write cache into NAND using capacitor hold-up and rebuilds the mapping table within ten seconds. Samsung's SPOR chapter describes that sequence step by step, which is a different kind of claim from a bullet point that says the cache is protected. It also publishes tail latency, which is what a shared host actually feels: 0.2 ms read and 0.1 ms write at queue depth 1, 0.6 ms and 1.9 ms at depth 32, all at the 99.99th percentile.

Why a 2018 MLC drive still earns a slot in 2026

Because the flash holds two bits per cell. TLC drives reach their headline write figures with an SLC cache and then fall back to a slower folding rate; a 2-bit MLC part writes at a steadier rate for the whole queue, and it does so with half the program/erase pressure per byte stored. That is where most of the 3.0 DWPD comes from — the rated endurance is a property of the NAND as much as of the over-provisioning, which is why the rating survives at 240 GB, the capacity where a TLC drive usually has the least room to hide.

MLC is also the reason this drive is worth considering next to a current TLC part at the same size. The PM893 at 240 GB is the faster drive on paper — 550/380 MB/s, 98K/15K IOPS — but it is a read-intensive design rated 438 TBW, a third of this one. The read-intensive member of this same generation, the PM883 at 240 GB, makes the same trade one generation earlier: 550/320 MB/s, 341 TBW, and 2.3 W on read. On a boot volume that is mostly read, either is the correct trade and the cheaper drive. On a volume that is written all day, it is the wrong one at any price.

One caveat that comes with the smallest capacity in a family: 240 GB carries the least parallelism and the least spare area, so it has the weakest consistency figures of the range — 98% read and 93% write at 4 KB, where the 480 GB and larger members reach 99/97. The drive still absorbs a sustained write stream, but its tail is not as flat as its bigger siblings'.

Technical specifications

Product familySamsung SM883 (V-NAND SSD, data centre / mixed-use)
PNMZ7KH240HAHQ (catalogue code)
Ordering codeMZ7KH240HAHQ-00005 (General SED)
Capacity240 GB (468,862,128 sectors of 512 bytes)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 6.80 mm, max 60 g)
InterfaceSATA 6 Gb/s, ATA/ATAPI-7 and Serial ATA 3.2
ControllerSamsung Maru (Samsung LSI), with DRAM write cache
NANDSamsung V-NAND, 2-bit MLC
Sequential read / write540 MB/s / 480 MB/s (128 KB, QD32)
Random 4 KB (QD32)97K IOPS read / 22K IOPS write
Random 8 KB (QD32)57K IOPS read / 11K IOPS write
IOPS consistency98% read / 93% write at 4 KB
Latency and QoS85 µs read / 35 µs write at QD1; 99.99th percentile 0.2 ms read, 0.1 ms write at QD1; 0.6 ms and 1.9 ms at QD32
Endurance1,314 TBW — 3.0 DWPD over five years (Samsung: TBW = DWPD × 365 × 5 × capacity)
PowerActive read 2.8 W; active write 3.7 W; idle 1.4 W; supply 5 V ±5%
Power-loss protectionYes — capacitor hold-up flushes DRAM to NAND; mapping table rebuilt within 10 s (SPOR). No hold-up time published
Data securityAES 256-bit encryption engine (General SED part); no TCG Opal claim
FeaturesTRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data protection, RoHS
ReliabilityMTBF 2.0 million hours; UBER 1 sector per 1017 bits read; data retention 3 months at 40 °C after rated endurance
EnvironmentalOperating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing
Shock and vibration1,500 G at 0.5 ms half sine; 20–2,000 Hz at 20 G peak, 7–800 Hz at 2.17 Grms
StatusEnd of life — Samsung has discontinued the SM883

Ordering codes we can supply at 240 GB

CodeTypeConditionQuote
MZ7KH240HAHQCatalogue codeNew / usedEnquire
MZ7KH240HAHQ-00005Ordering codeNew / usedEnquire

Both strings describe the same 240 GB drive. The model name decodes field by field: MZ for memory, 7 for the 2.5-inch 7 mm SATA form factor, K for the VM line-up (the 2-bit MLC V-NAND family), H for the Maru controller, 240 for capacity, H for the BGA NAND package, A for second-generation flash, HQ for the 1T QDP 4CE NAND density, and -00005 for the General SED customer code. That last field is the one to check against a PO: it is a security and packing designation, not a capacity or endurance variant, so it does not change 1,314 TBW or the IOPS figures.

What 1,314 TBW means in a day

Endurance is quoted two ways and only one of them compares across capacities. In absolute terms this drive absorbs 1,314 TB — less than the 1,540 TB of its predecessor and a quarter of the 5,256 TB of the 960 GB member of its own family, which is why absolute TBW is a poor way to rank drives of different sizes. In relative terms it is 0.72 TB of writes every day for five years: 3.0 drive-writes-per-day, against 3.5 on the SM863a and 1.0 on the read-intensive PM893.

The two numbers in this generation finally agree with each other. Samsung publishes the formula — TBW = DWPD × 365 × 5 × capacity — and 3.0 × 365 × 5 × 240 GB works out to exactly 1,314 TB. On the 863a generation the brochure figure and the TBW figure disagreed by a tenth of a drive-write; here there is nothing to reconcile, and the person sizing a deployment does not have to guess which number the warranty follows.

Put the allowance in perspective. A drive written flat out at 480 MB/s would consume the whole rating in about 32 days, so the ceiling is real and not decorative. What 3.0 DWPD actually buys is a decade of ordinary service instead of a five-year countdown: a journal flushed every few seconds, a write-back cache that is rewritten continuously, or a system disk that logs all day will use a fraction of 720 GB a day, and the drive will still be inside its rating when the platform is retired.

Where this drive fits, and what it does not have

240 GB is too small to be a data tier in 2026, so the role has to be one where the bytes are few and the writes never stop: a mirrored boot pair on a hypervisor host, a journal or WAL volume, a write-back cache in front of slower storage, an appliance system disk that logs continuously, a ZFS special-vdev member. In each of those the read-intensive part with the same capacity is the wrong choice, because the workload spends its life writing. It is also the capacity that pairs naturally with a two-socket server built before NVMe boot became standard.

Three things are missing compared with a current-generation drive, and only the first is a design constraint. Power-loss protection is capacitor-based and documented, but unquantified: the drive flushes its write cache and rebuilds its mapping table on interruption, which covers a short outage, yet Samsung publishes no hold-up time, so it does not replace a controller cache with a battery or a UPS on a journaled volume. There is no TCG Opal 2.0 claim — the -00005 part carries the AES 256-bit engine and the ATA General SED designation, so encryption at rest works, but software that depends on Opal locking or remote management should not be specified against this drive. And the generation is out of production, so at 240 GB the pool of remaining stock is finite and shrinking.

Where both current-generation credentials and more room are wanted, the PM893 at 960 GB reaches 1,752 TBW — more absolute endurance than this drive at a quarter of the write-intensity rating, with Opal 2.0 and a published PLP specification. It is the right answer for a mostly-read boot volume and the wrong one for a journal. The honest summary: buy this when a 240 GB slot has to survive continuous writing on a platform that already has the cache and the UPS in place, not when a new design is being drawn.

How 240 GB compares with the SM883 range and its neighbours

ModelCapacitySequential read / writeRandom 4K read / writeEnduranceClass
SM883 240 GB240 GB540 / 480 MB/s97K / 22K IOPS1,314 TB (3.0 DWPD)Mixed-use
SM883 480 GB480 GB540 / 520 MB/s97K / 27K IOPS2,628 TB (3.0 DWPD)Mixed-use
SM883 960 GB960 GB540 / 520 MB/s97K / 29K IOPS5,256 TB (3.0 DWPD)Mixed-use
SM883 1.92 TB1.92 TB540 / 520 MB/s97K / 29K IOPS10,512 TB (3.0 DWPD)Mixed-use
SM883 3.84 TB3.84 TB540 / 520 MB/s97K / 29K IOPS21,024 TB (3.0 DWPD)Mixed-use
SM863a 240 GB240 GB410 / 450 MB/s90K / 10K IOPS1,540 TB (3.5 DWPD)Mixed-use
PM863a 240 GB240 GB330 / 300 MB/s86K / 9K IOPS341 TB (0.78 DWPD)Read-intensive
PM893 240 GB240 GB550 / 380 MB/s98K / 15K IOPS438 TB (1.0 DWPD)Read-intensive

Two rows carry most of the decision. Against the 863a of the same capacity, this drive wins every performance line and loses one: 1,314 TBW against 1,540. If the deployment is endurance-bound and the older drive is available cheaper, the older drive still does the job; if it is latency- or consistency-bound — a mirrored boot pair that has to come up predictably, a cache in front of a busy array — the 883 is the better part and the 15% smaller write budget is not the constraint. Against the read-intensive PM893 at 240 GB the trade is reversed: three times the endurance and 100 MB/s more sequential write here, 10 MB/s more sequential read, TCG Opal 2.0 and a published PLP specification there.

Inside the family, every capacity step up doubles the endurance while the drive-writes-per-day rating stays at 3.0, and every step above 240 GB also picks up 40 MB/s of write and a handful of random-write IOPS. That makes 240 GB the entry point rather than the sweet spot: it is the capacity to buy when the slot is small and the writes are constant, not when the budget is tight. If the role needs more room than this, the 480 GB SM863a doubles the bytes on the older design, and the 480 GB SM883 is the way to double them on this one.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

Pricing is quoted per order because condition and quantity both move it. Send the quantity, the condition you need and the server model the drive is going into, and you will get a quote with lead time the same working day. Boot mirrors are ordered in pairs and we will match units from a single batch where stock allows, including firmware revision and wear level. Because the SM883 is end-of-life, larger quantities are quoted against confirmed stock rather than a standing lead time.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View