240 GB 2.5-inch SATA mixed-use SSD, ordering code MZ7KM240HMHQ-00005
| Capacity | 240 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 3.5 |
| TBW | 1,540 TB |
| Sequential Read | 410 MB/s |
| Sequential Write | 450 MB/s |
| Random Read IOPS | 90K IOPS |
| Random Write IOPS | 10K IOPS |
| Power | 2.5 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | SED |
| Condition | New · Used |
Samsung SM863a 240 GB, 2.5-inch 7 mm SATA, catalogue code MZ7KM240HMHQ, ordering code MZ7KM240HMHQ-00005. The mixed-use member of Samsung's 2016 SATA family: 410 MB/s sequential read, 450 MB/s sequential write, 90K random read and 10K random write IOPS, and 1,540 TBW — a 3.5 drive-writes-per-day rating over five years. Stocked new or as tested pulls with a 1-year warranty from us.
Two things about this drive surprise people who know the read-intensive sibling. It is faster than the PM863a at the same capacity — 410/450 MB/s against 330/300, and 90K/10K IOPS against 86K/9K — and it is rated to absorb four and a half times as many bytes. At 240 GB the mixed-use part is not the slower, dearer option it is usually assumed to be; it is the better drive on every line except price per gigabyte.
Architecturally it is the same generation as its read-intensive twin: 48-layer V-NAND TLC behind a Samsung Mercury controller with a DRAM write cache, end-to-end data protection, an AES 256-bit engine, 2 million hours MTBF, and a 7 mm aluminium case that weighs 60 g. What differs is the firmware policy and the over-provisioning: less capacity handed to the host, more held back for garbage collection, which is where both the write speed and the endurance come from.
Sequential write is the giveaway: 450 MB/s here against 300 MB/s on the read-intensive part. A TLC drive writing sequentially has to fold SLC-cached blocks into TLC in the background, and the amount of space held back for that folding is what decides how long a burst can be sustained before the drive has to stop and catch up. The mixed-use firmware holds back more, so it sustains instead of stalling — and the same reserve is what lifts the endurance rating.
Random write follows the same logic: 10K IOPS against 9K, and more importantly 97% IOPS consistency against a lower figure on the read-intensive part. That consistency number is the one that matters in service: it says the ninety-ninth percentile stays near the average, so a queue does not collapse when the drive decides to collect garbage.
The practical consequence is a capacity that behaves like a small workhorse rather than a big boot disk. 240 GB is too small to be a data tier in 2026, so this drive is specified where the bytes are few but the writes are constant: a mirrored boot pair on a hypervisor host, a journal or WAL volume, a write-back cache in front of slower storage, an appliance system disk that logs continuously, a ZFS special-vdev member. In each of those roles the read-intensive part would be the wrong choice at any price, because the workload is writing all day.
| Product family | Samsung SM863a (V-NAND SSD, data centre / mixed-use) |
|---|---|
| PN | MZ7KM240HMHQ (catalogue code) |
| Ordering code | MZ7KM240HMHQ-00005 |
| Capacity | 240 GB (240 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 6.8 mm, max 60 g) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung Mercury, with DRAM write cache |
| NAND | Samsung V-NAND TLC (48-layer), with mixed-use over-provisioning |
| Sequential read / write | 410 MB/s / 450 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 90K IOPS read / 10K IOPS write |
| Endurance | 1,540 TBW — 3.5 DWPD over a 5-year basis (Samsung's brochure quotes 3.6; the published TBW works out to 3.5) |
| Power | Idle 1.4 W; active 2.5 W read / 3 W write (family typical figures, published at 1,920 GB); supply 5 V ±5% |
| Power-loss protection | Yes — Samsung specifies write-cache protection for this generation; no hold-up time is published |
| Data security | AES 256-bit encryption engine; no TCG Opal |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., Dynamic Thermal Guard, end-to-end data protection |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read; operating 0 °C to 70 °C |
| Shock | 1,500 G at 0.5 ms, half sine wave |
| Status | End of life — Samsung has discontinued the SM863a generation |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7KM240HMHQ | Catalogue code | New / used | Enquire |
| MZ7KM240HMHQ-00005 | Ordering code | New / used | Enquire |
Both strings describe the same 240 GB drive. MZ7KM240HMHQ is the model name printed on the label, alongside the shorter marketing code MZ-7KM240N that some asset systems carry; MZ7KM240HMHQ-00005 is the ordering code a PO line and a warranty claim are written against. The suffix is a packing and customer code, not a specification variant, so it does not change capacity or endurance.
Endurance on enterprise drives is quoted two ways and only one of them is comparable across capacities. In absolute terms this drive absorbs 1,540 TB — less than a 960 GB read-intensive drive's 1,752 TB, which is why absolute TBW is a poor way to compare two drives of different sizes. In relative terms it is 0.84 TB of writes every day for five years: 3.5 drive-writes-per-day against 0.78 on the read-intensive sibling at the same capacity, or 4.5× the daily allowance.
Put the two numbers together and the drive's job becomes obvious. It holds relatively little, but it can take a sustained write stream indefinitely — a journal flushed every few seconds, a cache that is rewritten all day, a log volume that would eat a read-intensive drive's allowance in a year. At 840 GB a day, a drive written flat out at 450 MB/s would still exhaust the rating in about 40 days, so the ceiling is real; what the rating buys is a decade of ordinary service rather than a five-year countdown.
A note on how Samsung states it, because the numbers in circulation disagree. The brochure lists 3.6 DWPD for this family; 1,540 TBW across 240 GB over five years works out to 3.5. Both describe the same endurance, and we quote 3.5 in the specification table because it is the figure you can reproduce from the TBW number.
Three things, and the first is the one that matters for a write-heavy role. Power-loss protection is specified but unquantified: Samsung's documentation states that this generation safeguards data in the write cache when power fails and adds end-to-end protection, but publishes no hold-up time — so it is cover for a brief interruption, not a guarantee you can design a journaled volume around. If the whole point of the drive is that it accepts writes continuously, a controller with a battery or flash-backed cache, or a UPS, is still part of the design. There is no TCG Opal, only a plain AES 256-bit engine. And the generation is out of production, which for a 240 GB part means the pool of remaining stock is finite and shrinking.
Samsung did build a direct successor, the SM883 at 240 GB: faster at 540/480 MB/s and 97K/22K IOPS, rated slightly lower for endurance at 1,314 TBW, and out of production as well. Within the current line there is no mixed-use part at this capacity at all — the PM893 at 240 GB is read-intensive, 438 TBW at 1.0 DWPD, and it carries a published PLP specification and TCG Opal 2.0 that the SM863a lacks. It is the right drive for a boot volume and the wrong one for a journal. Where more capacity and current-generation credentials are both wanted, the PM893 at 960 GB reaches 1,752 TBW — more absolute endurance than this drive, at a quarter of the write-intensity rating.
The honest summary: this is the drive to buy when a 240 GB slot has to survive continuous writing on a platform that already has the RAID cache and the UPS in place. It is not the drive to build a new design around, and it should not be specified where a single power interruption is unacceptable and nothing else covers it.
| Model | Capacity | Sequential read / write | Random read / write | Endurance | Class |
|---|---|---|---|---|---|
| SM863a 240 GB | 240 GB | 410 / 450 MB/s | 90K / 10K IOPS | 1,540 TB (3.5 DWPD) | Mixed-use |
| SM863a 480 GB | 480 GB | 510 / 485 MB/s | 95K / 19K IOPS | 3,080 TB (3.5 DWPD) | Mixed-use |
| SM863a 960 GB | 960 GB | 510 / 485 MB/s | 95K / 25K IOPS | 6,160 TB (3.5 DWPD) | Mixed-use |
| SM863a 1.92 TB | 1.92 TB | 510 / 485 MB/s | 95K / 28K IOPS | 12,320 TB (3.5 DWPD) | Mixed-use |
| PM863a 240 GB | 240 GB | 330 / 300 MB/s | 86K / 9K IOPS | 341 TB (0.78 DWPD) | Read-intensive |
Two rows carry most of the information. The 240 GB SM863a is the slowest mixed-use member of its family and still beats the read-intensive drive of the same capacity on throughput, endurance and IOPS consistency. And every capacity step up the SM863a range doubles the endurance while the drive-writes-per-day rating stays at 3.5 — so a 480 GB mixed-use drive is twice the bytes and twice the total write budget, at the same daily intensity. If the role needs more room than this, step up the SM863a range rather than sideways to the read-intensive one; if the role is read-mostly, the 480 GB read-intensive member is the cheaper way to get the same capacity.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
Pricing is quoted per order because condition and quantity both move it. Send the quantity, the condition you need and the server model the drive is going into, and you will get a quote with lead time the same working day. Boot mirrors are ordered in pairs and we will match units from a single batch where stock allows, including firmware revision and wear level. Because the SM863a generation is end-of-life, larger quantities are quoted against confirmed stock rather than a standing lead time.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV