3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
| Capacity | 3.84 TB |
|---|---|
| Interface | NVMe |
| Form Factor | E1.S |
| PCIe Version | PCIe 4.0 |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 7,008 TB |
| Sequential Read | 6,800 MB/s |
| Sequential Write | 4,000 MB/s |
| Random Read IOPS | 1,000K IOPS |
| Random Write IOPS | 180K IOPS |
| Power | 11 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | AES-XTS 256 |
| Condition | New · Used |
Samsung PM9A3 3.84 TB E1.S, single-width 1T carrier, catalogue code MZCL23T8HCLS, orderable as MZCL23T8HCLS-00AMV or MZTL23T8HCLS-00A07. 6,800 MB/s sequential read and 4,000 MB/s write on PCIe 4.0 x4, 1,000K random read and 180K random write IOPS, 7,008 TBW at 1 DWPD. 128-layer TLC V-NAND, capacitor-backed PLP, AES 256-bit full disk encryption, 11 W active read and 13.5 W active write.
This is the capacity where the shelf rather than the drive becomes the interesting part, and the largest one Samsung rated inside its 2021 E1.S envelope. Thirty-two of these fill a 1U chassis with 123 TB, which is what a rack full of 2.5-inch shelves used to take six or seven units to hold. The performance is within 100 MB/s of the 2.5-inch drive at the same capacity, so nothing about the carrier is a compromise here except the chassis it needs.
| Product family | Samsung PM9A3 (PCIe 4.0 data centre NVMe SSD, 1 DWPD) |
|---|---|
| PN | MZCL23T8HCLS (catalogue code) |
| Ordering codes | MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07 |
| Capacity | 3.84 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | E1.S, 1T single width, 9.5 mm (33.75 × 118.75 × 9.50 mm) |
| Interface | PCIe 4.0 x4, NVMe 1.4, EDSFF E1.S connector, 12 V |
| NAND | Samsung V6 (128-layer) V-NAND TLC |
| Sequential read | 6,800 MB/s (128 KB transfer size, queue depth 32) |
| Sequential write | 4,000 MB/s |
| Random 4K read | 1,000K IOPS (queue depth 32) |
| Random 4K write | 180K IOPS (queue depth 32) |
| Endurance (TBW) | 7,008 TB |
| Endurance (DWPD) | 1 drive write per day for five years |
| Power | 11 W active read, 13.5 W active write, about 3.5 W idle |
| Power-loss protection | Yes, capacitor-backed, with end-to-end data path protection |
| Encryption | AES 256-bit full disk encryption, TCG Opal 2.0 |
| MTBF | 2.0 million hours |
| Environment | 0 to 70 °C operating, 5 to 95% non-condensing humidity |
| Features | TRIM, garbage collection, S.M.A.R.T., secure boot, NVMe-MI over SMBus |
| Model | Capacity | Carrier | Seq read / write | Random 4 KB | TBW | Power |
|---|---|---|---|---|---|---|
| PM9A3 | 3.84 TB | U.2 7 mm | 6,900 / 4,100 MB/s | 1,000K / 180K | 7,008 TB | 11 W |
| PM9A3 | 3.84 TB | E1.S 1T | 6,800 / 4,000 MB/s | 1,000K / 180K | 7,008 TB | 11 W |
| PM9A3 | 3.84 TB | M.2 22110 | 5,500 / 2,000 MB/s | 800K / 85K | 7,008 TB | 8.2 W |
| PM9A3 | 1.92 TB | E1.S 1T | 6,800 / 2,700 MB/s | 850K / 130K | 3,504 TB | 11 W |
| PM9D3a | 3.84 TB | U.2 15 mm | 12,000 / 6,700 MB/s | 1,700K / 250K | 7,008 TB | 12.8 W |
The two PM9A3 rows at 3.84 TB sit 100 MB/s apart, and that gap is the whole cost of the smaller shell: 6,900 and 4,100 in the 15 mm U.2 drive, 6,800 and 4,000 in the E1.S carrier, identical random IOPS and identical 7,008 TBW. Whatever else changes when a drive moves to EDSFF, the endurance does not, because endurance at one drive write a day is arithmetic rather than thermal design.
The M.2 row is the carrier that does lose something real, at 5,500 and 2,000, and the reason is the same one that keeps E1.S competitive: a 12 V rail and a metal shell. The Gen5 row shows what the next link generation bought at this capacity — 12,000 and 6,700 — and none of that is available to a Gen4 host.
Thirty-two E1.S positions across the front of a 1U chassis is 123 TB and 352 W of active read, which is 2.86 W per terabyte. The same rack unit with 2.5-inch bays takes eight to twelve drives, so 31 to 46 TB at 88 to 132 W. The E1.S shelf costs 2.7 times the power and carries 2.7 to 4 times the capacity, so density per rack unit improves by four times and efficiency stays roughly where it was.
The number that does not stay flat is IOPS. Thirty-two devices at 1,000K random read is 32 million IOPS from one rack unit, which no 2.5-inch shelf can reach because it runs out of devices before it runs out of power. For a workload that is measured in IOPS per rack unit rather than watts per terabyte, that is the reason to build EDSFF at all.
The other reason is rebuild time. A 3.84 TB device rewrites in sixteen minutes at rated speed, so a shelf of thirty-two loses a smaller share of its capacity per failure and restores it faster than a twelve-bay 2.5-inch shelf holding 15 TB drives. Thirty-two devices also tolerate more concurrent failures before the array is at risk, which matters when the alternative is a twelve-drive RAID set.
Both ordering codes on this page are E1.S, which is unusual for a Samsung drive and worth explaining. MZTL23T8HCLS-00A07 appears in distributor catalogues as the E1.S 9.5 mm part; MZCL23T8HCLS-00AMV is the same capacity in the same carrier through a different channel. They share the controller, the NAND, the 7,008 TBW rating and, per Samsung E1.S specification, the same 9.5 mm height — but a catalogue that quotes a different height for one of these codes is describing a variant, so the height belongs on the quote rather than in an assumption.
E1.S has more than one thickness in the standard, and the difference is not cosmetic: a 1T caddy built for 9.5 mm will not close on a thicker module, and a 2T or 15 mm position will take a 9.5 mm drive but leave the space unused. Since the two codes arrive through different supply chains, the safe procedure is to confirm the thickness on the shelf drawing rather than assume it from the capacity, and to treat any listing that describes this part as "E1.S" without a number as incomplete.
One drive write a day for five years on 3.84 TB is 3.84 TB of host writes a day, or 44 MB/s averaged. At the rated 4,000 MB/s a full fill takes sixteen minutes. At the random write ceiling of 180K IOPS the drive absorbs 737 MB/s, and 7,008 TB at that rate lasts about a hundred and ten days.
Across a full shelf the aggregate is 224 PB of endurance and 123 TB of capacity, which is a combination worth stating because it changes how a tier gets planned: at 1 DWPD any shelf has five years of rated writes regardless of how many drives it holds, so a denser shelf buys capacity and IOPS rather than endurance. Where the workload is write-heavy, the answer is a higher DWPD part rather than more bays.
| Code | Type | Carrier | Condition | Quote |
|---|---|---|---|---|
| MZCL23T8HCLS | Catalogue code | E1.S 1T | New / used | Enquire |
| MZCL23T8HCLS-00AMV | Ordering code | E1.S 1T | New / used | Enquire |
| MZTL23T8HCLS-00A07 | Ordering code | E1.S 1T, 9.5 mm | New / used | Enquire |
The prefix is what identifies the carrier, and the two prefixes here are both E1.S — MZTL is the code most distributor catalogues carry for the 9.5 mm part, MZCL the one that arrives through OEM channels. Neither is a U.2 drive: MZQL is the 2.5-inch part at this capacity and MZ1L is the M.2 module. All four share 7,008 TBW and the same controller, and only one of them fits a given slot.
Every drive leaves with one year of cover, whether it was sealed or pulled and tested, and the cover is registered against the serial so it follows the hardware rather than the paperwork. Pulls are erased to a verifiable standard, graded and photographed before packing and the SMART log is archived with them. Packing and dispatch take three to seven working days, with tracking issued as the parcel leaves. Two pieces is the minimum on a line, other capacities and carriers in this family can be combined on one order, and quotations are returned the same working day once part number, condition and quantity are confirmed.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV
3.84 TB M.2 22110 NVMe SSD, PCIe 4.0, ordering codes MZ1L23T8HBLA-00A07 / -00B7C