960 GB 2.5-inch SATA enterprise SSD, ordering codes -00A07 / -00W07 / -00B7C
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 1,752 TB |
| Sequential Read | 550 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 98K IOPS |
| Random Write IOPS | 30K IOPS |
| Power | 3.2 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM893 960 GB in the 2.5-inch 7 mm SATA form factor, catalogued under MZ-7L396000 and supplied under the three ordering codes that carry the same build: MZ7L3960HCJR-00A07, MZ7L3960HCJR-00W07 and MZ7L3960HCJR-00B7C. 550 MB/s sequential read, 520 MB/s sequential write, 1,752 TBW, power-loss protection. Supplied new or as tested pulls, with a 1-year warranty from us.
960 GB is where this drive stops being only a boot disk. Random write reaches 30K IOPS here, the ceiling for the family, and endurance doubles again to 1,752 TBW. That combination is what lets one pair carry the operating system, the hypervisor image and a local datastore for a handful of VMs without the write path becoming the argument for a different part.
The controller note is the same across the line: Samsung's in-house controller with a DRAM cache, and the write figures above are what the capacity delivers, not a burst number. Sequential write is flat at 520 MB/s from 480 GB upward, so the only thing a larger capacity still buys is endurance and space — 1,752 TBW here against 876 TBW at 480 GB, 3,504 TBW at 1.92 TB.
Everything else is the standard SATA feature set: hot-swap 7 mm bays, 6 Gb/s falling back to 3 Gb/s and 1.5 Gb/s, SAS backplanes whose expander accepts SATA targets, PLP capacitors, AES 256-bit full-disk encryption with TCG Opal 2.0 and IEEE 1667, TRIM, garbage collection and S.M.A.R.T. Active power averages 2.2 W reading and 3.2 W writing with 1.5 W idle.
A mirror of two 960 GB drives gives 1.92 TB usable in two 2.5-inch bays. That is the point at which a hypervisor host can keep its VM images, a container layer and swap locally instead of reaching for shared storage or burning capacity bays on it — and the 30K random write IOPS are what make that role defensible rather than a compromise.
Endurance works out at the same 1.0 drive-write-per-day over five years (1,752 ÷ (0.96 × 365 × 5) = 1.0), but there is four times as much of it as the 240 GB part and twice the 480 GB. That matters when the volume is written every day by something other than an installer. If the workload is sustained ingest rather than a local datastore, this is still a 1 DWPD drive and the PM897 at 3 DWPD is the correct part.
| Product family | Samsung PM893 (V-NAND SSD, data center / server) |
|---|---|
| PN | MZ-7L396000 (catalogue code) |
| Ordering codes | MZ7L3960HCJR-00W07, MZ7L3960HCJR-00A07, MZ7L3960HCJR-00B7C |
| Capacity | 960 GB (960 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung in-house controller, DRAM cache with LPDDR4 |
| NAND | Samsung V-NAND TLC |
| Sequential read / write | 550 MB/s / 520 MB/s |
| Random 4 KB (QD32) | 98K IOPS read / 30K IOPS write |
| Endurance | 1,752 TBW — 1 DWPD over a 5-year rating period |
| Power | Idle 1.5 W (DIPM off); active average 2.2 W read / 3.2 W write; allowable voltage 5 V ± 5% |
| Power-loss protection | Yes, PLP capacitors |
| Data security | AES 256-bit full-disk encryption, TCG Opal 2.0, IEEE 1667 |
| Features | TRIM, garbage collection, S.M.A.R.T. |
| Reliability | MTBF 2.0 million hours; operating 0 °C to 70 °C; non-operating -40 °C to 85 °C; 5–95% RH non-condensing |
| Shock / vibration | 1,500 G at 0.5 ms non-operating; 20–2,000 Hz at 20 G non-operating |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ-7L396000 | Catalogue code | New / used | Enquire |
| MZ7L3960HCJR-00W07 | Standard code | New / used | Enquire |
| MZ7L3960HCJR-00A07 | Channel code | New / used | Enquire |
| MZ7L3960HCJR-00B7C | Channel code | New / used | Enquire |
All four are the same 960 GB drive, stocked in both conditions. MZ-7L396000 is what we catalogue and quote under; the three ordering codes are what a PO line, a BOM or a warranty claim is usually written against, with -00W07 the standard code. One detail worth copying carefully: at this capacity the three-letter block is HCJR, not the HCHQ used at 240 and 480 GB — a mixed-up middle block is the most common reason a line fails to match. Put the code from your paperwork in the message field of the quote form; if the suffix is not listed, send it anyway.
| Model | Capacity | Sequential read / write | Random read / write | Endurance | Active power (read / write) |
|---|---|---|---|---|---|
| PM893 960 GB | 960 GB | 550 / 520 MB/s | 98K / 30K IOPS | 1,752 TBW (1 DWPD) | 2.2 / 3.2 W |
| PM893 240 GB | 240 GB | 550 / 380 MB/s | 98K / 15K IOPS | 438 TBW (1 DWPD) | 2.1 / 2.7 W |
| PM893 480 GB | 480 GB | 550 / 520 MB/s | 98K / 29K IOPS | 876 TBW (1 DWPD) | 2.1 / 3.2 W |
| PM893 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 30K IOPS | 3,504 TBW (1 DWPD) | 2.2 / 3.2 W |
| PM893 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 30K IOPS | 7,008 TBW (1 DWPD) | 2.2 / 3.2 W |
| PM893 7.68 TB | 7.68 TB | 550 / 520 MB/s | 98K / 30K IOPS | 14,016 TBW (1 DWPD) | 2.2 / 3.2 W |
Samsung PM893 1.92 TB and above run at identical speed and 0.1 W more under read; they buy endurance and space only, at 3,504 / 7,008 / 14,016 TBW. Above 1.92 TB the case for the part changes from local storage to the data tier.
PM897 shares the form factor and interface at 3 DWPD against 1 DWPD. If the volume is written continuously, the 960 GB PM893 is the wrong part regardless of capacity, and no amount of space fixes it.
Any 2.5-inch 7 mm hot-swap bay on a SATA controller accepts it, and SAS backplanes work where the expander accepts SATA targets. At this capacity the usual placements are data-adjacent rather than pure boot bays:
If the chassis only needs a system disk, the Samsung PM893 480 GB does the job for less. This capacity is for the node that also wants its images and a scratch volume on the same pair, without giving up a data-tier bay.
Every drive carries a 1-year warranty against defects in workmanship and function; verified faulty units are replaced or refunded and we cover return shipping. New and used stock are held separately, the condition you order is confirmed before dispatch, and used units are tested pulls rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days; tracking is issued at dispatch.
The figure shown above is the starting point; the final number moves with condition and quantity, which is why the quote is per order. Send the quantity, the condition, the server model and the ordering code as it appears on your paperwork. For a hypervisor rollout, tell us the node count and we quote matched pairs so both drives in a node come from one batch and one firmware generation.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV