480 GB 2.5-inch SATA mixed-use SSD, ordering code MZ7KH480HAHQ-00005
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | MLC |
| Endurance (DWPD) | 3 |
| TBW | 2,628 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 27K IOPS |
| Power | 2.8 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | SED |
| Condition | New · Used |
Samsung SM883 480 GB, 2.5-inch 7 mm SATA, catalogue code MZ7KH480HAHQ, ordering code MZ7KH480HAHQ-00005. 540 MB/s sequential read, 520 MB/s sequential write, 97K random read and 27K random write IOPS, 2,628 TBW — 3.0 drive-writes-per-day over five years — on 2-bit MLC V-NAND behind a Samsung Maru controller. Stocked new or as tested pulls with a 1-year warranty from us.
This is the capacity where the SM883 range stops compromising. The 240 GB member is the same silicon with half the dies: it gives up 40 MB/s of sequential write, 5K of random write, and four points of write-consistency to get there, and it carries half the total write budget. At 480 GB the drive reaches the family's full 520 MB/s write figure, 27K random write IOPS, 99% read and 97% write consistency, and 2,628 TBW — enough that the endurance question drops out of the design review.
The rest of the package is unchanged from the generation: 2-bit MLC V-NAND that holds its write rate across the whole queue rather than falling back to a folding rate, a documented power-loss sequence where capacitor hold-up flushes the DRAM cache to NAND and the mapping table is rebuilt within ten seconds, 99.99th-percentile latency of 0.2 ms read and 0.1 ms write at queue depth 1, and a 2-million-hour MTBF. It is a 2018 design, and it is out of production — what it still has going for it is sustained write behaviour that does not depend on how full the drive is — the property that justified MLC pricing until the PM897 at 480 GB matched this drive's endurance on TLC.
Because capacity is parallelism. A SATA SSD spreads writes across the NAND dies it has; at 240 GB there are simply fewer of them to keep busy, which is why that drive writes at 480 MB/s and reaches 22K random-write IOPS while every capacity above it reaches 520 MB/s and 27K or better. Doubling the die count does not double throughput, but it does remove the last place where the drive has to wait for its own garbage collection.
The consistency figures move with it, and they matter more than the headline numbers. At 480 GB the drive holds 99% of its read IOPS and 97% of its write IOPS in the sustained state, against 98% and 93% at 240 GB. For a workload that runs a queue, that difference is what decides whether the ninetieth percentile stays flat when the drive decides to collect garbage — and unlike a benchmark figure, it does not improve when you buy a faster host.
The third thing that doubles is the write budget: 2,628 TB against 1,314 TB, at the same 3.0 drive-writes-per-day. That is the point where a mixed-use drive stops being a specialist component and starts being a normal specification choice: at 1.44 TB of writes a day for five years, no realistic boot, journal or cache volume gets close, and the drive can be specified without a write-amplification model.
| Product family | Samsung SM883 (V-NAND SSD, data centre / mixed-use) |
|---|---|
| PN | MZ7KH480HAHQ (catalogue code) |
| Ordering code | MZ7KH480HAHQ-00005 (General SED) |
| Capacity | 480 GB (937,703,088 sectors of 512 bytes) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 6.80 mm, max 60 g) |
| Interface | SATA 6 Gb/s, ATA/ATAPI-7 and Serial ATA 3.2 |
| Controller | Samsung Maru (Samsung LSI), with DRAM write cache |
| NAND | Samsung V-NAND, 2-bit MLC |
| Sequential read / write | 540 MB/s / 520 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 27K IOPS write |
| Random 8 KB (QD32) | 57K IOPS read / 13K IOPS write |
| IOPS consistency | 99% read / 97% write at 4 KB, sustained |
| Latency and QoS | 85 µs read / 35 µs write at QD1; 99.99th percentile 0.2 ms read, 0.1 ms write at QD1; 0.6 ms and 1.9 ms at QD32 |
| Endurance | 2,628 TBW — 3.0 DWPD over five years (Samsung: TBW = DWPD × 365 × 5 × capacity) |
| Power | Active read 2.8 W; active write 3.7 W; idle 1.4 W; supply 5 V ±5% |
| Power-loss protection | Yes — capacitor hold-up flushes DRAM to NAND; mapping table rebuilt within 10 s (SPOR). No hold-up time published |
| Data security | AES 256-bit encryption engine (General SED part); no TCG Opal claim |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data protection, RoHS |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read; data retention 3 months at 40 °C after rated endurance |
| Environmental | Operating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing |
| Shock and vibration | 1,500 G at 0.5 ms half sine; 20–2,000 Hz at 20 G peak, 7–800 Hz at 2.17 Grms |
| Status | End of life — Samsung has discontinued the SM883 |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7KH480HAHQ | Catalogue code | New / used | Enquire |
| MZ7KH480HAHQ-00005 | Ordering code | New / used | Enquire |
The model name is built the same way across the range: MZ for memory, 7 for the 2.5-inch 7 mm SATA form factor, K for the VM line-up (the 2-bit MLC V-NAND family), H for the Maru controller, 480 for capacity, H for the BGA NAND package, A for second-generation flash, HQ for the 1T QDP 4CE NAND density, and -00005 for the General SED customer code. As on every capacity in this family, the last field is a security and packing designation rather than a performance variant — it does not change 2,628 TBW or the IOPS figures.
2,628 TB over five years is 1.44 TB of writes every day: 3.0 drive-writes-per-day at 480 GB, the same intensity as every other capacity in the range. Written flat out at 520 MB/s the rating would last a little under 59 days, so the ceiling exists — but nothing that fits on a 480 GB drive writes at 520 MB/s for two months. The figure that matters is the daily allowance, and 1.44 TB is roughly what a busy log volume, a virtualisation host's local swap and a pair of mirrored boot devices will consume together.
Samsung's formula is published and it reconciles exactly here: 3.0 × 365 × 5 × 480 GB = 2,628 TB. That is worth noting because on the previous generation the brochure drive-writes figure and the TBW figure disagreed by a tenth of a drive-write, which left buyers guessing which number a warranty claim would be measured against. On this generation there is one number and it is reproducible.
For scale inside the family: this drive carries twice the write budget of the 240 GB member and half that of the 960 GB member, at identical intensity. If a deployment is deciding between two 480 GB drives mirrored and one 960 GB drive, the mirrored pair brings 5,256 TB of combined budget plus redundancy, and the single drive brings the same bytes with a single point of failure. On mixed-use parts that trade usually lands on the pair.
480 GB is the smallest capacity in this range that can carry a real workload rather than a special one. The obvious roles are a mirrored boot pair on a hypervisor host, a journal or WAL volume sized for a day of transactions, a write-back cache in front of slower tiers, a logging or metrics store that is rewritten continuously, a ZFS special-vdev pair. It is also the capacity to choose when a 240 GB slot keeps filling up: the extra 240 GB removes the capacity pressure without changing the write-intensity rating or the form factor, and the write performance improves at the same time.
Three things are missing compared with a current-generation drive, and only the first constrains a design. Power-loss protection is capacitor-based and documented but unquantified — the drive flushes its write cache and rebuilds its mapping table on interruption, which covers a short outage, yet no hold-up time is published, so a controller cache with a battery or a UPS still belongs in the design. There is no TCG Opal 2.0 claim: the -00005 part is a General SED device with the AES 256-bit engine, so encryption at rest works, but software that depends on Opal locking or remote management should not be specified against it. And the generation is out of production, so supply is remaining stock rather than a lead time.
Where current-generation credentials matter more than write behaviour, the PM893 at 480 GB is the read-intensive alternative: 550/520 MB/s, 98K/29K IOPS, TCG Opal 2.0 and a published PLP specification, at 876 TBW and 1.0 DWPD — a third of this drive's write budget. It is the right drive for a mostly-read boot volume and the wrong one for a journal. Where more room is wanted on this design, the PM893 at 960 GB reaches 1,752 TBW — still two-thirds of this drive's budget at twice the capacity, which is the clearest way to see what the MLC rating buys.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| SM883 240 GB | 240 GB | 540 / 480 MB/s | 97K / 22K IOPS | 1,314 TB (3.0 DWPD) | Mixed-use |
| SM883 480 GB | 480 GB | 540 / 520 MB/s | 97K / 27K IOPS | 2,628 TB (3.0 DWPD) | Mixed-use |
| SM883 960 GB | 960 GB | 540 / 520 MB/s | 97K / 29K IOPS | 5,256 TB (3.0 DWPD) | Mixed-use |
| SM883 1.92 TB | 1.92 TB | 540 / 520 MB/s | 97K / 29K IOPS | 10,512 TB (3.0 DWPD) | Mixed-use |
| SM883 3.84 TB | 3.84 TB | 540 / 520 MB/s | 97K / 29K IOPS | 21,024 TB (3.0 DWPD) | Mixed-use |
| PM897 480 GB | 480 GB | 560 / 530 MB/s | 97K / 60K IOPS | 2,628 TB (3.0 DWPD) | Mixed-use, TLC |
| SM863a 480 GB | 480 GB | 510 / 485 MB/s | 95K / 19K IOPS | 3,080 TB (3.5 DWPD) | Mixed-use |
| PM863a 480 GB | 480 GB | 520 / 480 MB/s | 97K / 16K IOPS | 683 TB (0.78 DWPD) | Read-intensive |
| PM893 480 GB | 480 GB | 550 / 520 MB/s | 98K / 29K IOPS | 876 TB (1.0 DWPD) | Read-intensive |
Read the first three rows and the pattern is obvious: 240 GB to 480 GB buys 40 MB/s of write, 5K of random write, four points of write consistency and double the endurance, while 480 GB to 960 GB buys only 2K of random write and double the endurance. That makes 480 GB the last capacity where a step up changes the drive's character; above it the steps are about room, not behaviour.
Against the SM863a of the same capacity this drive is faster on every line — 540/520 against 510/485, 27K against 19K random write — and slightly lower on endurance, 2,628 TB at 3.0 DWPD against 3,080 TB at 3.5. That is the same trade as at 240 GB: the newer generation spends a little write budget on speed and consistency. Against the read-intensive PM893 at 480 GB the trade is reversed and much wider — three times the endurance here against 10 MB/s more sequential read, 2K more random write and Opal 2.0 there, with sequential write level at 520 MB/s. Pick by whether the volume is written all day or mostly read; there is no middle answer at this capacity.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from — the SM883 is end-of-life, so larger quantities are quoted against confirmed stock rather than a standing lead time. Send the quantity, the condition you need and the server model the drives are going into, and you will get a quote with lead time the same working day. Mirrored pairs are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV