Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ7KM480HMHQ · Samsung

Samsung SM863a 480GB SATA SSD (MZ7KM480HMHQ)

480 GB 2.5-inch SATA mixed-use SSD, ordering code MZ7KM480HMHQ-00005

New Used
From $250.00
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ7KM480HMHQ
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 480 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 3.5
TBW 3,080 TB
Sequential Read 510 MB/s
Sequential Write 485 MB/s
Random Read IOPS 95K IOPS
Random Write IOPS 19K IOPS
Power 2.5 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption SED
Condition New · Used

Frequently Asked Questions

The model name on the label is MZ7KM480HMHQ and the ordering code is MZ7KM480HMHQ-00005. The suffix encodes packing type and customer code rather than a specification variant, so it does not change capacity or endurance. Both strings describe the same 480 GB drive in the 2.5-inch 7 mm SATA form factor.

Because the step from 240 GB to 480 GB delivers three of the four improvements the range ever makes: sequential read 410 to 510 MB/s, sequential write 450 to 485, and random write 10K to 19K IOPS, a 90% gain. Above 480 GB only random write moves again, by about a third, while sequential throughput stays put. You get nearly the whole capability of the range at its lowest cost per usable node.

Sequential speed is effectively identical: 510/485 MB/s against 520/480. The difference is random write, 19K against 16K IOPS, and endurance, 3,080 TB at 3.5 drive-writes-per-day against 683 TB at 0.78 — four and a half times the write budget. You pay more per gigabyte for that, and you give up the published PLP specification the current read-intensive generation carries.

Not in Samsung's SATA line. The PM893 at 480 GB is faster and certifies PLP plus TCG Opal 2.0, but its 876 TBW at 1.0 DWPD is 28% of this drive's budget, and even the 960 GB PM893 at 1,752 TBW reaches only 57% of it. At this endurance level the mixed-use family has no read-intensive substitute, whatever the capacity.

Samsung specifies power loss protection for the write cache on this generation, with end-to-end data protection, but publishes no hold-up time, so it covers a brief interruption rather than guaranteeing a flush window in every condition. For a volume that writes continuously, keep the RAID controller cache or a UPS in the design. There is no TCG Opal, only a plain AES 256-bit engine.

Samsung has discontinued the SM863a generation, so supply is decommissioned server stock and remaining channel inventory. Every drive we ship carries a 1-year warranty from us, and units are pull-tested with the SMART readout kept on file, including the wear indicator.

Samsung SM863a 480 GB, 2.5-inch 7 mm SATA, catalogue code MZ7KM480HMHQ, ordering code MZ7KM480HMHQ-00005. The mixed-use member of Samsung's 2016 SATA family: 510 MB/s sequential read, 485 MB/s sequential write, 95K random read and 19K random write IOPS, and 3,080 TBW — a 3.5 drive-writes-per-day rating over five years. Stocked new or as tested pulls with a 1-year warranty from us.

Of the four capacities in this range, 480 GB is the one that gains the most from the capacity step below it. Going from 240 GB to 480 GB lifts sequential read by 100 MB/s, sequential write by 35 MB/s, and random write by 90% — from 10K to 19K IOPS. Above 480 GB only random write moves again, and only by about a third. Everything the range is capable of is essentially present at this capacity, which is what makes it the volume choice.

Underneath it is the same generation as the rest of the family: 48-layer V-NAND TLC behind a Samsung Mercury controller with a DRAM write cache, end-to-end data protection, an AES 256-bit engine, 2 million hours MTBF, and a 7 mm case at 60 g. What separates it from the read-intensive PM863a of the same capacity is firmware policy and over-provisioning, not silicon.

This is where the range makes its only real jump

Read the family numbers in sequence and the shape is a step followed by a plateau. 240 GB runs 410/450 MB/s with 90K/10K IOPS; 480 GB runs 510/485 with 95K/19K; 960 GB runs 510/485 with 95K/25K; 1.92 TB runs 510/485 with 95K/28K. The step to 480 GB delivers three of the four improvements the range ever makes, and the largest of them — random write nearly doubling — is the one that decides whether a write-heavy volume stays responsive under a queue.

The mechanism is die and plane count again. Random write IOPS scales with how many NAND planes the controller can program concurrently, so doubling capacity roughly doubles the ceiling until the SATA queue or the controller's own scheduling becomes the limit. At 480 GB the drive is already inside 25 MB/s of the family's best sequential figure and at 68% of its best random write; the capacities above it buy endurance and space, not responsiveness.

In practice 480 GB is the smallest size at which this drive covers a whole 1U node rather than one role in it: an operating-system mirror, the application volume beside it, and a log or journal directory that writes all day fit inside 480 GB on most edge and virtualisation hosts. That is why it is the capacity most often ordered in pairs.

Technical specifications

Product familySamsung SM863a (V-NAND SSD, data centre / mixed-use)
PNMZ7KM480HMHQ (catalogue code)
Ordering codeMZ7KM480HMHQ-00005
Capacity480 GB (480 GB decimal)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 6.8 mm, max 60 g)
InterfaceSATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s
ControllerSamsung Mercury, with DRAM write cache
NANDSamsung V-NAND TLC (48-layer), with mixed-use over-provisioning
Sequential read / write510 MB/s / 485 MB/s (128 KB, QD32)
Random 4 KB (QD32)95K IOPS read / 19K IOPS write
Endurance3,080 TBW — 3.5 DWPD over a 5-year basis (Samsung's brochure quotes 3.6; the published TBW works out to 3.5)
PowerIdle 1.4 W; active 2.5 W read / 3 W write (family typical figures, published at 1,920 GB); supply 5 V ±5%
Power-loss protectionYes — Samsung specifies write-cache protection for this generation; no hold-up time is published
Data securityAES 256-bit encryption engine; no TCG Opal
FeaturesTRIM, NCQ to depth 32, S.M.A.R.T., Dynamic Thermal Guard, end-to-end data protection
ReliabilityMTBF 2.0 million hours; UBER 1 sector per 1017 bits read; operating 0 °C to 70 °C
Shock1,500 G at 0.5 ms, half sine wave
StatusEnd of life — Samsung has discontinued the SM863a generation

Ordering codes we can supply at 480 GB

CodeTypeConditionQuote
MZ7KM480HMHQCatalogue codeNew / usedEnquire
MZ7KM480HMHQ-00005Ordering codeNew / usedEnquire

Both strings describe the same 480 GB drive. MZ7KM480HMHQ is the model name printed on the label and the one this catalogue and most asset registers index on; MZ7KM480HMHQ-00005 is the ordering code a PO line and a warranty claim are written against. The suffix encodes packing type and customer code, so it does not change capacity, endurance or firmware behaviour.

Against the read-intensive 480 GB: same speed, four and a half times the endurance

Put this drive next to the PM863a at 480 GB and the sequential headline is a wash: 510/485 here against 520/480 there. Read is two percent lower, write is one percent higher, and no workload will notice either. The differences that matter sit elsewhere. Random write is 19K against 16K IOPS, and the endurance rating is 3,080 TB against 683 TB — four and a half times the total bytes, at 3.5 drive-writes-per-day against 0.78.

That is the whole case for paying more per gigabyte, and it is worth stating in absolute terms because those are the numbers people can check. At 480 GB this drive tolerates 1.7 TB of writes a day for five years; the read-intensive equivalent tolerates 0.37 TB a day. A boot pair running an OS and a log directory that are patched and rewritten continuously sits comfortably inside the first figure and slowly consumes the second.

The trade in the other direction is price and read-side parity. Where the workload really is read-mostly — a boot volume on an appliance, a content cache, an image store — the read-intensive drive at this capacity is the cheaper way to get the same interface speed, and it also carries a published PLP specification that the SM863a generation does not.

What is missing compared with a current-generation drive

Three things. Power-loss protection is specified but unquantified: Samsung's documentation states that this generation safeguards data in the write cache when power fails and adds end-to-end protection, but publishes no hold-up time — cover for a brief interruption, not a guaranteed flush window to design a journaled volume around. With a continuous write stream that distinction matters, so keep the RAID cache or the UPS in the design. There is no TCG Opal, only a plain AES 256-bit engine. And the generation is out of production.

The current generation does not remove the reason to buy this drive. The PM893 at 480 GB is faster on paper — 550/520 MB/s, 98K/29K IOPS — and it adds a published PLP specification, TCG Opal 2.0 and continued production, but its 876 TBW at 1.0 DWPD is still only 28% of this drive's write budget. Even the 960 GB current-generation part reaches 1,752 TB, which is 57% of a 480 GB SM863a. In Samsung's SATA line, endurance at this level is a property of the mixed-use family and has no read-intensive substitute at any capacity.

So the decision is narrow and honest. New build, read-mostly, five-year horizon: take the PM893. Existing platform with a write-heavy role, a RAID cache or UPS in front of the drive, and a part number already qualified: this drive does something the current range does not, and will keep doing it for as long as the stock lasts.

How 480 GB compares with the SM863a range and its read-intensive twin

ModelCapacitySequential read / writeRandom read / writeEnduranceClass
SM863a 240 GB240 GB410 / 450 MB/s90K / 10K IOPS1,540 TB (3.5 DWPD)Mixed-use
SM863a 480 GB480 GB510 / 485 MB/s95K / 19K IOPS3,080 TB (3.5 DWPD)Mixed-use
SM863a 960 GB960 GB510 / 485 MB/s95K / 25K IOPS6,160 TB (3.5 DWPD)Mixed-use
SM863a 1.92 TB1.92 TB510 / 485 MB/s95K / 28K IOPS12,320 TB (3.5 DWPD)Mixed-use
PM863a 480 GB480 GB520 / 480 MB/s97K / 16K IOPS683 TB (0.78 DWPD)Read-intensive

The top four rows differ in two columns only: random write, which climbs 19K to 25K to 28K, and endurance, which doubles at every step while the daily intensity stays pinned at 3.5. Sequential throughput is already at its ceiling here, so a larger capacity in this range buys write parallelism and write budget rather than headline speed. The last row is the same capacity in the other class, and the comparison it invites — a two percent read deficit against four and a half times the endurance — is the one that decides most purchases at 480 GB.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

Pricing is quoted per order because condition and quantity both move it. Send the quantity, the condition you need and the server model the drive is going into, and you will get a quote with lead time the same working day. Boot pairs and mirrored log volumes are ordered in pairs and we will match units from a single batch where stock allows, including firmware revision and wear level. Because the SM863a generation is end-of-life, larger quantities are quoted against confirmed stock rather than a standing lead time.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View