960 GB 2.5-inch SATA mixed-use SSD, ordering code MZ7KH960HAJR-00005
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | MLC |
| Endurance (DWPD) | 3 |
| TBW | 5,256 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 29K IOPS |
| Power | 2.8 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | SED |
| Condition | New · Used |
Samsung SM883 960 GB, 2.5-inch 7 mm SATA, catalogue code MZ7KH960HAJR, ordering code MZ7KH960HAJR-00005. 540 MB/s sequential read, 520 MB/s sequential write, 97K random read and 29K random write IOPS, 5,256 TBW — 3.0 drive-writes-per-day over five years — on 2-bit MLC V-NAND behind a Samsung Maru controller. Stocked new or as tested pulls with a 1-year warranty from us.
960 GB is where this range stops getting faster. Random write reaches 29K IOPS here and stays there all the way to 3.84 TB; the two capacities below it give up 2K and 7K respectively, and nothing above it gains anything. The same is true of the 8 KB figure, which arrives at its 14K ceiling at this capacity. Everything the SM883 generation has to offer in performance is in this drive, and the capacities above it sell capacity and endurance rather than speed.
It is also the first capacity in the family that can hold a working set rather than a system image. 960 GB of MLC at 29K sustained random write is a credible small database volume, a VM datastore for a handful of guests, or one half of a mirrored pair that has to survive a rebuild without the survivor falling over. And it is the last capacity where the endurance rating is still comfortably ahead of what the role needs: 5,256 TBW is 2.88 TB of writes every day for five years.
The rest of the package is the generation's: a documented power-loss sequence where capacitor hold-up flushes the DRAM cache to NAND and the mapping table is rebuilt within ten seconds, 99.99th-percentile latency of 0.2 ms read and 0.1 ms write at queue depth 1, a 2-million-hour MTBF, and no TCG Opal. It is a 2018 design and it is out of production, so the question is not whether it is current but whether the write behaviour is worth buying over a current TLC part at the same capacity.
Three things, and they are worth separating. The first is capacity: 960 GB is the smallest capacity in this range that can be a data volume instead of a system volume. The second is the last increment of write performance — 2K random write IOPS over the 480 GB member and 1K at 8 KB, which is a small gain in isolation but arrives with double the endurance. The third is endurance itself: 5,256 TB, twice the 480 GB and four times the 240 GB.
The NAND packages change at this capacity, which is worth knowing when a PO is checked against a photograph of the label. The 240 GB and 480 GB drives are built from 1 Tb dies in four-chip-enable packages, coded HQ; this drive and the 1.92 TB member use 2 Tb dies in two-chip-enable packages, coded JR; the 3.84 TB uses 4 Tb dies, coded LS. That is what the characters before the dash in the model number record. It changes nothing a buyer cares about — same interface, same endurance rating, same controller — but it does explain why the catalogue code ends HAJR rather than HAJQ.
What it does not buy is a newer generation. The PM893 at 960 GB is the current Samsung SATA part at this capacity: 550/520 MB/s, 98K/30K IOPS, TCG Opal 2.0, a published PLP specification — and 1,752 TBW, exactly a third of this drive's budget. If the workload is mostly reads, that is the better drive at a lower price. If the drive is being written all day, three times the write budget is the whole argument.
| Product family | Samsung SM883 (V-NAND SSD, data centre / mixed-use) |
|---|---|
| PN | MZ7KH960HAJR (catalogue code) |
| Ordering code | MZ7KH960HAJR-00005 (General SED) |
| Capacity | 960 GB (1,875,385,008 sectors of 512 bytes) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 6.80 mm, max 60 g) |
| Interface | SATA 6 Gb/s, ATA/ATAPI-7 and Serial ATA 3.2 |
| Controller | Samsung Maru (Samsung LSI), with DRAM write cache |
| NAND | Samsung V-NAND, 2-bit MLC (2 Tb dies, two-chip-enable packages) |
| Sequential read / write | 540 MB/s / 520 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 29K IOPS write |
| Random 8 KB (QD32) | 57K IOPS read / 14K IOPS write |
| IOPS consistency | 99% read / 97% write at 4 KB, sustained |
| Latency and QoS | 85 µs read / 35 µs write at QD1; 99.99th percentile 0.2 ms read, 0.1 ms write at QD1; 0.6 ms and 1.9 ms at QD32 |
| Endurance | 5,256 TBW — 3.0 DWPD over five years (Samsung: TBW = DWPD × 365 × 5 × capacity) |
| Power | Active read 2.8 W; active write 3.7 W; idle 1.4 W; supply 5 V ±5% |
| Power-loss protection | Yes — capacitor hold-up flushes DRAM to NAND; mapping table rebuilt within 10 s (SPOR). No hold-up time published |
| Data security | AES 256-bit encryption engine (General SED part); no TCG Opal claim |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data protection, RoHS |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read; data retention 3 months at 40 °C after rated endurance |
| Environmental | Operating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing |
| Shock and vibration | 1,500 G at 0.5 ms half sine; 20–2,000 Hz at 20 G peak, 7–800 Hz at 2.17 Grms |
| Status | End of life — Samsung has discontinued the SM883 |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7KH960HAJR | Catalogue code | New / used | Enquire |
| MZ7KH960HAJR-00005 | Ordering code | New / used | Enquire |
Reading the model name: MZ for memory, 7 for the 2.5-inch 7 mm SATA form factor, K for the VM line-up (the 2-bit MLC V-NAND family), H for the Maru controller, 960 for capacity, H for the BGA NAND package, A for second-generation flash, JR for the 2 Tb 2-CE NAND density, and -00005 for the General SED customer code. Only that last field is a purchasing decision — it identifies the security and packing variant, not the capacity or the endurance — and it is the field that has to match the PO exactly.
2.88 TB of writes every day for five years, which is 3.0 drive-writes-per-day at 960 GB. Written flat out at 520 MB/s the rating would be exhausted in about 117 days, so the ceiling is real; but 2.88 TB a day is roughly what a database volume, its transaction log and a replication staging area will consume between them on a modest host. At this capacity the endurance number stops being the thing that decides the purchase and starts being headroom.
The arithmetic is worth showing because it is exactly reproducible from the published figures: 3.0 × 365 × 5 × 960 GB = 5,256 TB. Samsung's 883 generation is the point at which the drive-writes figure and the TBW figure agree; on the 863a generation they differed by a tenth of a drive-write, and buyers had to guess which one a warranty claim would be measured against.
Inside the family the steps are clean: 1,314 / 2,628 / 5,256 / 10,512 / 21,024 TB at 240 GB through 3.84 TB, doubling each time at an unchanged 3.0 DWPD. That makes the capacity choice a capacity choice rather than an endurance choice, which is the useful property of a range that does not de-rate its small members — and the reason the 240 GB part, at a quarter of this drive's bytes, carries exactly a quarter of its write budget rather than less.
At 960 GB the SM883 stops being a specialist part. The natural roles are a VMFS or LVM datastore for a handful of guests, a small database with its log on the same device, a mirrored pair carrying an appliance's state, a ZFS mirror whose special-vdev requirement is already met elsewhere, a build or artefact cache that is rewritten constantly. In each of those the drive is doing what MLC does best: absorbing a continuous write stream without the queue collapsing when the cache is spent.
The limits are the generation's, and they have not changed with capacity. Power-loss protection is capacitor-based and documented but unquantified — it covers a short interruption, not a sustained outage, so a battery-backed controller cache or a UPS still belongs in the design. There is no TCG Opal 2.0 claim: the -00005 part is a General SED device with the AES 256-bit engine, which encrypts data at rest but does not give you Opal locking or remote management. And the drive is out of production — at 960 GB the remaining stock is more plentiful than at 240 GB, but it is still remaining stock.
Where the deployment needs current-generation credentials, the PM893 at 960 GB carries Opal 2.0, a published PLP specification and a slightly faster read side, at a third of the write budget. The honest summary for this capacity: buy the SM883 when the volume is written continuously and 2.88 TB a day is a real number in the design; buy the PM893 when it is mostly read and a third of that budget is already generous.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| SM883 240 GB | 240 GB | 540 / 480 MB/s | 97K / 22K IOPS | 1,314 TB (3.0 DWPD) | Mixed-use |
| SM883 480 GB | 480 GB | 540 / 520 MB/s | 97K / 27K IOPS | 2,628 TB (3.0 DWPD) | Mixed-use |
| SM883 960 GB | 960 GB | 540 / 520 MB/s | 97K / 29K IOPS | 5,256 TB (3.0 DWPD) | Mixed-use |
| SM883 1.92 TB | 1.92 TB | 540 / 520 MB/s | 97K / 29K IOPS | 10,512 TB (3.0 DWPD) | Mixed-use |
| SM883 3.84 TB | 3.84 TB | 540 / 520 MB/s | 97K / 29K IOPS | 21,024 TB (3.0 DWPD) | Mixed-use |
| SM863a 960 GB | 960 GB | 510 / 485 MB/s | 95K / 25K IOPS | 6,160 TB (3.5 DWPD) | Mixed-use |
| PM863a 960 GB | 960 GB | 520 / 480 MB/s | 97K / 24K IOPS | 1,366 TB (0.78 DWPD) | Read-intensive |
| PM893 960 GB | 960 GB | 550 / 520 MB/s | 98K / 30K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive |
The first five rows show the shape of the family: throughput and random write climb to a ceiling at 960 GB and then stop, while endurance keeps doubling to 21,024 TB at 3.84 TB. Above this capacity you are buying bytes and write budget, not behaviour, which is why 960 GB is the sensible place to stop when the workload fits.
Against the SM863a of the same capacity the trade is the same one that runs through this whole generation: 540/520 against 510/485 and 29K against 25K random write, in exchange for 5,256 TB against 6,160 TB of endurance. The older drive genuinely carries a bigger write budget at every capacity — 3.5 drive-writes against 3.0 — so on a deployment that is purely endurance-bound and price-sensitive the 863a is not the wrong answer. Against the read-intensive pair the gap is wider: the PM893 reads faster and manages 30K random write, but holds a third of the endurance, and the PM863a is a quarter of it.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from — the SM883 is end-of-life, so larger quantities are quoted against confirmed stock rather than a standing lead time. Send the quantity, the condition you need and the server model the drives are going into, and you will get a quote with lead time the same working day. Mirrored pairs are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV