480 GB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK480TDC-1AT1ZABYY
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 870 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 385 MB/s |
| Random Read IOPS | 81K IOPS |
| Random Write IOPS | 33K IOPS |
| Power | 3.6 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5200 ECO 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480TDC, ordering code MTFDDAK480TDC-1AT1ZABYY. 540 MB/s sequential read, 385 MB/s sequential write, 81K random read and 33K random write IOPS at 4 KB, 870 TBW — one drive write a day for five years — on Micron 64-layer 3D TLC, with 200 µs read and 300 µs write latency, TCG Enterprise configurability and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
This is the successor platform to the 5100, and at 480 GB the generational step is easy to state: the same 540 MB/s read, a slightly faster write path, 870 TB of write budget instead of 450, and one figure that goes backwards — random read falls from 93K to 81K because the 64-layer die put the same capacity behind fewer packages. If the tier is read-mostly, that trade needs thinking about; if it writes at all, the endurance is worth it.
Moving from 32-layer to 64-layer NAND doubles the bits per die, so a 480 GB drive is built from fewer packages than the previous generation used. Fewer packages mean less parallelism for random reads, which is why the figure drops 13% here, and it is also why endurance roughly doubles: the same overprovisioning ratio now sits on die that can take more program and erase cycles before retirement.
The write path improves on both counts. Sequential write steps from 380 to 385 MB/s and random write from 31K to 33K, while the budget goes from 450 TB to 870 TB — a 93% increase on a drive with the same capacity, the same case and the same 540 MB/s read. Read latency also improves, to 200 µs at the 99.9th percentile against the 500 µs the previous generation quoted.
So the comparison is not a clean win in either direction, and that is what makes it worth writing down. A read cache with a small working set and a large lookup rate is better served by the older drive's 93K; a boot volume, a log partition or a metadata tier that writes every day is better served by this one's 870 TB. The two drives are the same width, the same connector and the same firmware family, so the substitution costs nothing but the decision.
| Product family | Micron 5200 ECO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK480TDC (catalogue code) |
| Ordering code | MTFDDAK480TDC-1AT1ZABYY |
| Capacity | 480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 64-layer 3D TLC |
| Sequential read / write | 540 MB/s / 385 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 81K IOPS read / 33K IOPS write |
| Quality of service | 200 µs read / 300 µs write at the 99.9th percentile |
| Endurance | 870 TBW — 1.0 DWPD over five years |
| TBW basis | Drive held full under a random write workload over the five-year rating period |
| Power | 3.6 W maximum on sequential write, 3.0 W maximum on sequential read, 1.5 W idle; supply 5 V at the connector |
| Power-loss protection | Yes — data-protection capacitor with capacitor monitoring reported by firmware |
| Data security | AES 256-bit encryption, TCG Enterprise configurability |
| DRAM cache | Yes |
| Features | Flex Capacity, end-to-end data path protection, adaptive thermal monitoring, RAIN recovery, S.M.A.R.T., secure and fast erase, secure firmware |
| Reliability | MTTF 3.0 million device hours; UBER under 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz |
870 TB over five years is 477 GB of writes every day, one full fill of the drive. Written flat out at 385 MB/s the whole allowance would last about 26 days; the rating assumes that daily allowance spread across 1,825 days. A boot and log pair writing 80 GB a day uses 17% of the allowance, and a content cache that rewrites a fifth of its capacity daily uses 20% — both are ordinary duties for this tier, and both leave the drive inside its rating for the full five years.
Against the previous generation at this capacity the budget is 1.9 times larger: the 5100 ECO 480 GB carries 450 TBW at 0.51 drive writes a day. That is the single strongest reason to specify this drive instead, because the rest of the specification is nearly identical: same 540 MB/s read, 385 against 380 MB/s write, and 33K against 31K random write.
Against the mixed-use and write-intensive tiers at this capacity the budget is behind, and deliberately so. The 5100 PRO 480 GB carries 1,300 TB at 1.48 drive writes a day and the MAX member 4,400 TB at five, both at the same 540 MB/s read. This drive is the read-intensive tier of its generation: it writes once a day, and a volume that writes more than that should be buying the tier above it rather than stretching this one.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK480TDC | Catalogue code | New / used | Enquire |
| MTFDDAK480TDC-1AT1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 480 is the capacity, and the block after it identifies the series and tier. TDC is 5200 ECO; the same family reserves TDD for PRO and TDN for MAX, and the previous generation used TBY, TCB and TCC in those positions, which is how a 480 GB drive can be identified as a 5100 or a 5200 without reading anything else.
The configuration string also changed: this drive ends in -1AT1ZABYY rather than the -1AR1ZABYY of the previous generation, so the suffix after the hyphen is a reliable second check at goods-in. The capacity line, the 7 mm case and the label layout are otherwise identical, and a mixed pallet of 480 GB enterprise drives is worth sorting by the four characters after the capacity.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5200 ECO 480 GB | 480 GB | 540 / 385 MB/s | 81K / 33K IOPS | 870 TB (1.0 DWPD) | 3.6 W max | Read-intensive, 64-layer TLC |
| Micron 5100 ECO 480 GB | 480 GB | 540 / 380 MB/s | 93K / 31K IOPS | 450 TB (0.51 DWPD) | 4.5 W typ | Read-intensive, 32-layer TLC |
| Micron 5100 PRO 480 GB | 480 GB | 540 / 410 MB/s | 93K / 43K IOPS | 1,300 TB (1.48 DWPD) | 4.5 W typ | Mixed-use, 3D eTLC |
| Micron 5100 MAX 480 GB | 480 GB | 540 / 460 MB/s | 93K / 74K IOPS | 4,400 TB (5.0 DWPD) | 4.5 W typ | Write-intensive, 3D eTLC |
| Micron M510DC 480 GB | 480 GB | 420 / 380 MB/s | 63K / 23K IOPS | 1,850 TB (2.1 DWPD) | 6 W | Mixed-use, 16nm MLC |
| Samsung PM897a 480 GB | 480 GB | 560 / 530 MB/s | 97K / 60K IOPS | 2,628 TB (3.0 DWPD) | 2.3 W | Mixed-use, TLC |
| Samsung SM883 480 GB | 480 GB | 540 / 520 MB/s | 97K / 27K IOPS | 2,628 TB (3.0 DWPD) | 2.8 W | Mixed-use, MLC |
Read straight across. This drive is sixth of seven on write budget at 870 TB and sixth on endurance class at 1.0, ahead only of the previous-generation ECO at 450 TB; fourth on random write at 33K; sixth on random read at 81K, ahead only of the MLC drive at 63K; fifth on sequential write at 385 MB/s; and fifth on power, quoted here as a 3.6 W maximum rather than a typical figure.
Two rows are worth reading together: this drive and its predecessor. They share a capacity, a case, a read rate and a tier name, and they differ by a factor of 1.9 on endurance, by 13% on random read in the opposite direction, and by a whole NAND generation. Any fleet that still has both in inventory should decide which role each one goes to rather than treating them as interchangeable.
The ECO tier of this generation runs 480 GB, 960 GB, 1.92 TB, 3.84 TB and 7.68 TB, and the budget scales with the bytes: 870, 1,750, 3,500, 7,700 and 8,400 TB. The rating holds at one drive fill a day through 1.92 TB, rises to 1.1 at 3.84 TB and drops to 0.6 at the top capacity. The performance curve is the familiar shape, 540 MB/s read throughout, sequential write rising from 385 to 520 from 960 GB upward, and random read rising from 81K to 95K and holding there as the capacity climbs.
The step from here to 960 GB is the largest single improvement in the tier on three counts: double the capacity, double the budget, and sequential write up from 385 to 520 MB/s in one move. It also carries the one regression in that tier, random write easing from 33K to 28K as the bytes double. The step to 3.84 TB costs nothing in endurance ratio — the previous generation at 3.84 TB carries 6,400 TB at 0.9 drive writes a day, and this generation's larger members hold the same one-a-day rating with more bytes behind it.
For a 480 GB boot or cache volume the decision is therefore simple: this drive if the volume writes once a day or more and reads less than it writes, the previous generation if it is a pure read cache with a high lookup rate. For a volume that needs more space, the 960 GB member of this generation is the better buy than two of these, on ports, cables, firmware records and sequential write.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 480 GB the difference between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV