Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK480MBP · Micron

Micron M510DC 480GB SATA SSD (MTFDDAK480MBP)

480 GB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK480MBP-1AN1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK480MBP
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 480 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type MLC
Endurance (DWPD) 2.1
TBW 1,850 TB
Sequential Read 420 MB/s
Sequential Write 380 MB/s
Random Read IOPS 63K IOPS
Random Write IOPS 23K IOPS
Power 6 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK480MBP and the ordering code is MTFDDAK480MBP-1AN1ZABYY. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in the 2.5-inch 7 mm form factor, 480 is the capacity, MBP is the family block, and the suffix after the hyphen is the configuration string Micron assigns at order entry. All four capacities in this range share that suffix.

Because Micron rates capacity groups differently rather than scaling endurance with bytes. The 120, 240 and 480 GB members are rated at two drive fills a day: 460, 920 and 1,850 TBW. The 960 GB member is rated at one drive fill a day, which gives 1,140 TBW, and its random write drops to 10.5K. So the 960 GB drive has twice the bytes, 38% less write budget and less than half the random write throughput.

Both, and they answer different questions. 5 V at 1.7 A is the input envelope the drive may draw at the connector, which is what a backplane or power supply is sized against. 6 W is the measured maximum during a 128 KB sequential write; idle is 1.2 W. Size the supply on the label rating and the thermal design on the measured figures.

This drive carries 1,850 TBW against 876 TB, so 2.1 times the write budget, and both are read-intensive parts. The PM893 is faster: 550/520 MB/s against 420/380, and 98K/29K IOPS against 63K/23K. Choose this one when the volume is rewritten daily and price per device matters; choose the PM893 when the tier is read-dominated and line-rate throughput matters.

TCG Enterprise 1.0, not Opal 2.0. That scheme needs a controller, HBA or software stack that speaks it, and a consumer desktop BIOS will not manage the drive. A used drive may also arrive locked to a previous owner keys, so we query the security state before shipping. Ask for it explicitly if your platform uses enterprise key management.

It is the endurance leader among the three capacities rated at two drive fills a day: 1,850 TBW against 920 at 240 GB and 460 at 120 GB, and the highest random write in that group at 23K. The 600 GB member carries more - 3,800 TBW at 3.5 fills a day and 40K random write - while the 800 and 960 GB members carry less. If the requirement is more bytes than that at the same endurance, this range does not have an answer, and the choice is a mixed-use Samsung part at 480 GB or a larger capacity from another family with its own endurance rating.

Micron M510DC 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480MBP, ordering code MTFDDAK480MBP-1AN1ZABYY. 420 MB/s sequential read, 380 MB/s sequential write, 63K random read and 23K random write IOPS at 4 KB, 1,850 TBW on Micron 16nm MLC NAND, with a data-protection capacitor, TCG Enterprise self-encryption and end-to-end data path protection. Stocked new or as tested pulls with a 1-year warranty from us.

This is the capacity where the range turns over. 1,850 TBW is 2.0 times the 240 GB budget and 62% more than the 960 GB drive, and 23K random write is nearly double the 120 GB figure — but the 600 GB member above it carries 3,800 TBW and 40K, so 480 GB is the endurance leader among the capacities rated at two drive fills a day rather than the peak of the whole range. Micron rates 120, 240 and 480 GB at two fills a day, 600 GB at 3.5, and 800 and 960 GB at 1.7 and 1.0, which is why the endurance curve turns down after 600 GB instead of continuing up.

Why the 480 GB member outlasts both of its neighbours

Every capacity in this range reads at 420 MB/s and the write side steps up with the die count until the endurance rule takes over. Sequential write runs 170, 290, 380, 380, 380 and 380 MB/s across 120, 240, 480, 600, 800 and 960 GB; random write runs 12K, 18K, 23K, 40K, 30K and 10.5K; endurance runs 460, 920, 1,850, 3,800, 2,500 and 1,140 TB. The 480 GB part reaches the same sequential write as the 600, 800 and 960 GB parts at a lower capacity, beats the 960 GB drive by 62% on write budget and by more than double on random write, and draws 6 W at peak against the larger drive's 6.3 W.

What that means practically is that 480 GB is the largest capacity rated at two drive fills a day. The 600 GB part moves to 3.5 fills and earns the range's highest budget, while the 800 and 960 GB parts drop to 1.7 and 1.0; within the three capacities rated at two fills, this is the one with the most endurance, the highest random write and the full 380 MB/s sequential write. Anyone buying the 960 GB member for its capacity is trading away roughly 38% of the write budget and more than half the random write throughput to get twice the bytes.

Against the capacities below it, the step from 240 GB is a straight doubling: bytes double, budget doubles from 920 to 1,850 TB, random write rises 28% and sequential write 31%. The step below that, from 120 GB, is where the largest single gain in write speed sits, 170 to 290 MB/s. So the range has three natural stopping points — 240 GB for the price-and-speed balance, 480 GB for the two-fill ceiling, and 600 GB for the endurance maximum — and this page is about the middle one.

Technical specifications

Product familyMicron M510DC (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK480MBP (catalogue code)
Ordering codeMTFDDAK480MBP-1AN1ZABYY
Capacity480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (69.85 × 100.45 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS2, hot-plug capable, NCQ to depth 32
NANDMicron 16nm MLC NAND
Sequential read / write420 MB/s / 380 MB/s (128 KB, steady state)
Random 4 KB (QD32)63K IOPS read / 23K IOPS write
Latency0.50 ms read / 2.0 ms write (typical)
Endurance1,850 TBW — 2.1 DWPD over five years, which Micron states as 2 drive fills a day
TBW basis55 °C case temperature, drive 100% full, 100% random aligned 4 KB writes
PowerIdle 1.2 W; sequential write max 6 W; sequential read max under 6 W; active average 1.5 W
Rated input5 V ±10%, 1.7 A (label rating, used to size backplane supply)
Power-loss protectionYes — data-protection capacitor, with capacitor monitoring reported by firmware
Data securityTCG Enterprise 1.0 SED (self-encrypting drive); AES encryption engine
DRAM cacheYes — on-board DDR3 DRAM
FeaturesXPERT feature set: data path protection, adaptive thermal monitoring, power-loss protection; static and dynamic wear levelling; end-to-end data protection
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1016 bits read
EnvironmentalOperating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing; operating shock 1500G/0.5 ms; vibration 10–500 Hz at 3.1G
Firmware on label0005, as printed at the F/W position; we record the revision of each unit shipped

What the label says: 5V 1.7A against a 6 W rating

The label on this drive carries two numbers that look like they disagree: a rated input of 5 V 1.7 A, which multiplies out to 8.5 W, and a published maximum of 6 W maximum during sequential write. Both are correct, and the difference matters when a drive is selected for a chassis. The 1.7 A rating is the input envelope the drive is allowed to draw at the connector — the number a backplane or power budget is sized against, with margin. The 6 W figure is what the drive actually consumes while writing sequentially at 128 KB, measured at 25 °C on a 6 Gb/s port. Idle is 1.2 W.

For a 24-bay chassis the difference is not academic. Sizing on the label rating gives an envelope of about 204 W for the drive set; sizing on measured sequential write gives about 144 W, and on idle about 29 W. A power supply sized on the label will never brown out during a staggered spin-up of a shelf, and a thermal design sized on the measured figure will run the right fan curve. Use each number for the job it is meant for.

The rest of the label is worth reading at goods-in as well: Model MTFDDAK480MBP, P/N MTFDDAK480MBP-1AN1ZABYY, the capacity line 480GB SATA 6Gb/s, the lot number and Product of SINGAPORE. The capacity line is the field that separates this drive from the 240 GB member, because the model number differs only in that block and the configuration suffix is identical on both.

Ordering codes and the configuration suffix

CodeTypeConditionQuote
MTFDDAK480MBPCatalogue codeNew / usedEnquire
MTFDDAK480MBP-1AN1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 480 is the capacity in gigabytes, MBP is the family and form-factor block, and everything after the hyphen is the configuration string Micron assigns at order entry. Micron does not publish a field-by-field decode for that suffix, so we quote it in full rather than guess at its parts. All six capacities in this range share the same configuration string, which is why the capacity block carries the whole distinction.

One practical consequence: a mixed pallet of M510DC drives will show four model numbers that all begin MTFDDAK and all end -1AN1ZABYY, and only the three digits in the middle identify the capacity. A receiving process that matches on prefix or suffix will accept any of them against any line. Read the middle block, or read the capacity line printed above it on the label.

What 1,850 TBW means at 480 GB

1,850 TB over five years is 1,013 GB of writes every day — two full fills of the drive, the same daily ratio as the 120 and 240 GB members. Written flat out at 380 MB/s the rating would last about 56 days, which is longer than the 120, 240 and 960 GB members reach on the same basis, though the 600 GB part stretches to 116 days, and all of them fall short of the five years the rating covers. The basis is a 55 °C case, a drive held 100% full and 100% random aligned 4 KB writes, so it is a harsher workload than any sequential one.

The comparison that decides this capacity against the read-intensive Samsung parts is not close on endurance and not close the other way on throughput. The PM893 at 480 GB carries 876 TBW at 1.0 drive fill a day; this drive carries 1,850 TB, or 2.1 times as much. The PM883 at the same capacity carries 683 TB, 2.7 times less. In the other direction the PM893 does 550/520 MB/s and 98K/29K IOPS against 420/380 and 63K/23K here.

Where this drive does hold its own is random write. At 23K it sits above the PM863a and SM863a rows at 16K and 19K, below the PM893 at 29K and the PM883 at 24K, and it is the figure that decides how a drive behaves when a queue forms. For a volume that writes in bursts rather than continuously, that is worth more than 130 MB/s of sequential write.

How the M510DC 480 GB compares with the Samsung 480 GB parts

ModelCapacitySequential read / writeRandom 4K read / writeEnduranceClass
Micron M510DC 480 GB480 GB420 / 380 MB/s63K / 23K IOPS1,850 TB (2.1 DWPD)Read-intensive, 16nm MLC
Micron M510DC 960 GB960 GB420 / 380 MB/s65K / 10.5K IOPS1,140 TB (0.65 DWPD)Same family, 1 drive fill/day
Micron M510DC 240 GB240 GB420 / 290 MB/s63K / 18K IOPS920 TB (2.1 DWPD)Same family, half capacity
Samsung PM893 480 GB480 GB550 / 520 MB/s98K / 29K IOPS876 TB (1.0 DWPD)Read-intensive, TLC
Samsung PM883 480 GB480 GB550 / 520 MB/s98K / 24K IOPS683 TB (0.78 DWPD)Read-intensive, TLC
Samsung SM883 480 GB480 GB540 / 520 MB/s97K / 27K IOPS2,628 TB (3.0 DWPD)Mixed-use, MLC
Samsung SM863a 480 GB480 GB510 / 485 MB/s95K / 19K IOPS3,080 TB (3.5 DWPD)Mixed-use, MLC

The first three rows are one family and they make the capacity argument on their own: the 480 GB part carries 62% more write budget than the 960 GB part and more than double its random write, and 2.0 times the budget of the 240 GB part for twice the bytes. Among the Samsung 480 GB rows, this drive is third of five on write budget — the two mixed-use MLC parts at 2,628 and 3,080 TB are ahead, everything read-intensive is behind — and last on sequential throughput in both directions: 420/380 MB/s against 510/485 on the SM863a and 550/520 on the PM893 and PM883.

Against the newer 480 GB part on this site, the Micron 5100 ECO, the trade runs the other way. That drive reads at 540 MB/s with 93K random read and 31K random write at 4.5 W, all ahead of this one, and carries 450 TBW against 1,850 — a quarter of the write budget for the same capacity. Faster read path, cooler running, shorter rated life: which of the two belongs in a build depends on whether the volume is read or rewritten.

So the choice at 480 GB is unusually clean. If the workload is a read tier, every Samsung row is faster and the endurance is irrelevant. If it is a write volume that must absorb two fills a day for five years at the lowest cost per device, this drive carries more budget than any read-intensive part here except the two mixed-use drives, which cost more and draw comparable power. The 23K random write is what makes it usable in the second role rather than merely rated for it.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch. Send the quantity, the condition you need and the platform the drives are going into, and you will get a quote with lead time the same working day. If the host uses TCG Enterprise key management, say so when you enquire and we will confirm the drive's security state before it ships; matched sets for a mirror or a parity group are selected from a single batch where stock allows, including firmware revision and wear level.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View