3.84 TB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK3T8TBY-1AR1ZABYY
| Capacity | 3.84 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 0.9 |
| TBW | 6,400 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 93K IOPS |
| Random Write IOPS | 18K IOPS |
| Power | 6 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5100 ECO 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK3T8TBY, ordering code MTFDDAK3T8TBY-1AR1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 18K random write IOPS at 4 KB, 6,400 TBW on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
This is the last capacity in the 5100 ECO range that keeps the 0.9 drive-write class, and the largest one that does. Below it the 1.92 TB member carries 3,200 TBW on half the bytes at the same class; above it the 7.68 TB member drops to 0.6 drive writes a day and 8,400 TBW, so the largest drive in the family carries 31% more write budget than this one on twice the capacity. If the requirement is a large read tier with the strongest endurance the platform offers, this is the capacity that ends the search.
The family divides into three endurance classes: 0.5 drive writes a day at 480 GB and 960 GB, 0.9 at 1.92 TB and 3.84 TB, and 0.6 at 7.68 TB. That makes the TBW column rise to a plateau and then step down at the top: 450, 900, 3,200, 6,400 and 8,400 TB. This capacity sits at the top of the plateau, which is why it carries twice the budget of the 1.92 TB member and only 24% less than a drive with twice its bytes.
Performance tells a different story at this size. Sequential read and write hold at 540/520 MB/s and random read at 93K, exactly as they do from 960 GB upward, but random write continues the fall that starts at the small end of the range: 31K at 480 GB, 28K at 960 GB, 24K at 1.92 TB, 18K here and 9K at 7.68 TB. Capacity in this family buys space and endurance and gives up small-block write throughput, and this is the point where that trade starts to be visible in a queue.
For a read tier the trade is nearly free. Sequential throughput is the figure that governs restores, bulk loads and streaming reads, and it does not move between 960 GB and this capacity. The random-write figure only matters when writes queue, and a tier that fills this drive once and serves it for five years never builds that queue. That is the workload this capacity is built for.
| Product family | Micron 5100 ECO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK3T8TBY (catalogue code) |
| Ordering code | MTFDDAK3T8TBY-1AR1ZABYY |
| Capacity | 3.84 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 3D enterprise TLC (eTLC) |
| Sequential read / write | 540 MB/s / 520 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 93K IOPS read / 18K IOPS write |
| Quality of service | 500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999% |
| Endurance | 6,400 TBW — 0.9 DWPD over five years |
| TBW basis | Drive held full under a random write workload over the five-year rating period |
| Power | Typical 6 W; supply 5 V at the connector |
| Power-loss protection | Yes — data-protection capacitor with capacitor monitoring reported by firmware |
| Data security | AES 256-bit encryption, TCG Enterprise 1.0 SED |
| DRAM cache | Yes |
| Features | End-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase |
| Reliability | MTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz |
6,400 TB over five years is 3,507 GB of writes every day, a little under one full fill of the drive. Written flat out at 520 MB/s the rating would last about 142 days; the rating assumes that daily allowance spread across 1,825 days rather than a drive run at its ceiling. A volume that rewrites a third of its content daily uses 1,280 GB, or 36% of the allowance, which leaves headroom for a rebuild without eating into the rated life.
Against the read-intensive parts at this capacity the budget is close but not the top. The PM893 at 3.84 TB carries 7,008 TBW at 1.0 drive write a day, 9% more than this drive, and the PM883 and PM863a carry 5,466 TB at 0.78, which is 15% less. The mixed-use SM883 at the same capacity carries 21,024 TB at 3.0 drive writes a day, more than three times this budget, and is the part to price against when endurance rather than price per byte governs.
What this drive adds on top of the budget is the latency floor and the power figure: 500 µs typical on both read and write, where the MLC parts at this capacity run 0.5 ms read and 2.0 ms write, and 6 W typical against 6.3 W. In a 24-bay chassis that is 7 W across the shelf, and for a synchronous write path it is a 4x shorter write latency than the MLC platform offers.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK3T8TBY | Catalogue code | New / used | Enquire |
| MTFDDAK3T8TBY-1AR1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 3T8 is the capacity block that stands for 3.84 TB, and the block after it identifies the family and endurance tier. Everything after the hyphen is the configuration string Micron assigns at order entry, and the suffix -1AR1ZABYY is assigned per SKU rather than per capacity.
At goods-in the capacity block is the field that matters, because 3T8 is the easiest of the five to confuse with 1T9 at a glance and the two drives are otherwise identical: same 7 mm case, same 540/520 MB/s, same 93K random read, same 0.9 endurance class and the same configuration suffix. The difference is 1.92 TB of capacity and 3,200 TB of write budget, and it does not announce itself on a shelf.
The step between the two 0.9-class capacities is the cleanest doubling in the range. Bytes double, write budget doubles from 3,200 to 6,400 TB, sequential read and write do not move, and random write falls 25% from 24K to 18K. Power rises half a watt and the endurance class holds. There is no class change and no performance step in either direction — only capacity, budget and a slightly longer queue behind small-block writes.
The rebuild arithmetic is what decides between them in practice. A full rewrite of 1.92 TB at 520 MB/s takes about an hour; this capacity takes about two, and for those two hours a mirror is unprotected or a parity set runs degraded with every surviving member carrying double the read load. Where the maintenance window is an hour, the smaller member is the correct device even though its endurance class is identical.
Where the window is longer, or the array is wide enough that a two-hour rebuild is absorbed, this capacity halves the device count for the same raw space: twelve of these in a 2U is 46 TB against twenty-four of the 1.92 TB member, with half the ports, half the cables, half the firmware records and 7 W less idle draw across the shelf.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| Micron 5100 ECO 3.84 TB | 3.84 TB | 540 / 520 MB/s | 93K / 18K IOPS | 6,400 TB (0.9 DWPD) | Read-intensive, 3D eTLC |
| Micron 5100 ECO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 93K / 24K IOPS | 3,200 TB (0.9 DWPD) | Same family, half capacity |
| Micron 5100 ECO 960 GB | 960 GB | 540 / 520 MB/s | 93K / 28K IOPS | 900 TB (0.51 DWPD) | Same family |
| Samsung SM883 3.84 TB | 3.84 TB | 540 / 520 MB/s | 97K / 29K IOPS | 21,024 TB (3.0 DWPD) | Mixed-use, MLC |
| Samsung PM893 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 30K IOPS | 7,008 TB (1.0 DWPD) | Read-intensive, TLC |
| Samsung PM883 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 28K IOPS | 5,466 TB (0.78 DWPD) | Read-intensive, TLC |
| Samsung PM863a 3.84 TB | 3.84 TB | 520 / 480 MB/s | 97K / 24K IOPS | 5,466 TB (0.78 DWPD) | Read-intensive, TLC |
The table is honest about where this drive sits: it is third of six on write budget, level with three rows on sequential write at 520 MB/s, and last on both random figures at 93K and 18K. That last position is not a defect of this capacity but the shape of the family — random write falls with capacity at every step from 480 GB to 7.68 TB, and this is the fourth of the five capacities.
The purchase follows from which column binds. A read tier that stores media, images or published datasets binds on capacity and sequential throughput, both of which this drive delivers at the best endurance the platform offers. A tier that serves a small-block queue binds on random write, and at 18K this drive is the weakest read-intensive part in the table; the 960 GB or 1.92 TB member of the same family is the better device there, and the mixed-use MLC part is better again if the budget allows.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 3.84 TB the difference between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV