Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK480TCB · Micron

Micron 5100 PRO 480GB SATA SSD (MTFDDAK480TCB)

480 GB 2.5-inch SATA mixed-use SSD, ordering code MTFDDAK480TCB-1AR1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK480TCB
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 480 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1.48
TBW 1,300 TB
Sequential Read 540 MB/s
Sequential Write 410 MB/s
Random Read IOPS 93K IOPS
Random Write IOPS 43K IOPS
Power 4.5 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK480TCB and the ordering code is MTFDDAK480TCB-1AR1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 480 is the capacity, and TCB is the PRO tier block, which differs from the ECO and MAX blocks at the same capacity. The suffix after the hyphen is assigned per SKU.

Both sit on the same controller and firmware, so the difference is die count. Doubling the die count doubles the parallelism available for streaming writes, which lifts sequential write from 250 to 410 MB/s and random write from 26K to 43K, and doubles the write budget from 650 to 1,300 TB. Read speed barely changes, 540 MB/s either way, and power stays at 4.5 W.

1,300 TB over five years is 712 GB a day. A mirrored metadata volume writing 150 GB a day per drive uses 21% of that, and a virtualisation datastore writing 300 GB a day uses 42%. The rating is not the constraint for those roles; capacity and the rebuild window are. The drive is rated 1.48 drive writes a day and holds that rating for the whole five years.

Both are 480 GB, both read at 540 MB/s with 93K random read, and both draw 4.5 W. The PRO carries 1,300 TBW against 450, writes at 410 MB/s against 380, and serves 43K random write against 31K. The ECO is the read-mostly tier and the PRO is the mixed-use tier of the same platform, so the choice is about the write path rather than about capacity or power.

The PM897a and SM883 both carry 2,628 TBW at 3.0 drive writes a day, quote 560/530 and 540/520 MB/s, and serve 60K and 27K random write at 2.3 W and 2.8 W, so both are ahead on endurance and power and one is ahead on random write. This drive answers with 43K random write at 4.5 W on the same platform and firmware as the ECO drives, which is what matters when a fleet is qualified as one platform.

Both. A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops, and the drive is a TCG Enterprise 1.0 self-encrypting unit with AES 256-bit encryption. TCG Enterprise is not the same as consumer TCG Opal 2.0 and needs a controller or key-management stack that speaks it.

Micron 5100 PRO 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480TCB, ordering code MTFDDAK480TCB-1AR1ZABYY. 540 MB/s sequential read, 410 MB/s sequential write, 93K random read and 43K random write IOPS at 4 KB, 1,300 TBW — 1.48 drive writes a day for five years — on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

At 240 GB this tier is limited by how few NAND die the controller can drive at once. At 480 GB that limit lifts: sequential write rises from 250 to 410 MB/s, random write from 26K to 43K and write budget from 650 to 1,300 TB, all on the same controller, firmware and power figure. This is the capacity where the PRO tier stops being a specialist boot drive and becomes a general-purpose mixed-use drive that can carry streaming writes as well as queues.

Why 410 MB/s and 43K is where this tier opens up

Two figures move together at this step and they are the two that a mixed-use drive is judged on. Sequential write gains 64%, from 250 to 410 MB/s, because twice the die count doubles the parallelism the controller can schedule. Random write gains 65%, from 26K to 43K, because the write planes behind the overprovisioned area scale with the same die count. Endurance doubles for the same reason, from 650 to 1,300 TB, at the same 1.48 drive writes a day.

What does not move is the read side. Sequential read stays at 540 MB/s and random read steps from 78K to 93K, which is the family figure rather than a capacity step. That shape is useful in practice: a 480 GB volume used as a cache or a journal sees its write path improve by roughly two thirds while the read path stays where the rest of the fleet is, so a build can upgrade the tier without changing its expectations of read latency.

Against the 240 GB member of the same tier, this drive is the one to buy unless the volume is a pure boot partition. Twice the capacity, twice the write budget and two thirds more random write for the same 4.5 W is a rare combination in a 7 mm SATA drive, and it is the difference between a boot device and a working volume.

Technical specifications

Product familyMicron 5100 PRO (SATA NAND Flash SSD, mixed-use data centre)
PNMTFDDAK480TCB (catalogue code)
Ordering codeMTFDDAK480TCB-1AR1ZABYY
Capacity480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 3D enterprise TLC (eTLC), 32-layer
Sequential read / write540 MB/s / 410 MB/s (128 KB, steady state)
Random 4 KB (QD32)93K IOPS read / 43K IOPS write
Quality of service500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999%
Endurance1,300 TBW — 1.48 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
PowerTypical 4.5 W; supply 5 V at the connector
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise 1.0 SED
DRAM cacheYes, LPDDR3
FeaturesEnd-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

What 1,300 TBW means at 480 GB

1,300 TB over five years is 712 GB of writes every day, one and a half full fills of the drive. Written flat out at 410 MB/s the whole allowance would last about 37 days; the rating assumes that daily allowance spread across 1,825 days. A pair of these in a mirrored metadata volume writing 150 GB a day each uses 21% of the allowance, which leaves room for a quarterly rebuild without shortening the rated life.

Against the read-intensive drive at the same capacity the difference is the whole point of the tier. The 5100 ECO at 480 GB carries 450 TBW at 0.51 drive writes a day, 35% of this budget, and writes sequentially at 380 MB/s against 410. It draws the same 4.5 W and carries the same 540 MB/s read, so the entire step up is bought in write allowance and write throughput rather than in read speed or power.

Against the older MLC platform at this capacity, the M510DC 480 GB carries 1,850 TBW at 2.1 drive writes a day, 42% more endurance than this drive, and writes at 380 MB/s. This drive answers with 540 MB/s read against 420, 93K random read against 63K, 43K random write against 23K, and 4.5 W against 6 W. The older drive wins on endurance and on nothing else that a queue can measure.

Ordering codes and the tier block

CodeTypeConditionQuote
MTFDDAK480TCBCatalogue codeNew / usedEnquire
MTFDDAK480TCB-1AR1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 480 is the capacity, and the block after it identifies the tier and the interface. TCB is the PRO block; the ECO drive at the same capacity carries a different block in that position and so does the MAX, which is why the full string is what to quote and what to check at goods-in. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU.

The drives are physically identical across the tiers: same blue label, same 7 mm case, same 540 MB/s read, same capacity line. Only the tier block and the endurance differ, and the difference at this capacity is 450 TB against 1,300 TB. A mixed pallet of these needs the labels read rather than the cartons sorted by size.

How it compares across the 480 GB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 PRO 480 GB480 GB540 / 410 MB/s93K / 43K IOPS1,300 TB (1.48 DWPD)4.5 WMixed-use, 3D eTLC
Micron 5100 ECO 480 GB480 GB540 / 380 MB/s93K / 31K IOPS450 TB (0.51 DWPD)4.5 WRead-intensive, 3D eTLC
Micron M510DC 480 GB480 GB420 / 380 MB/s63K / 23K IOPS1,850 TB (2.1 DWPD)6 WMixed-use, 16nm MLC
Samsung PM897a 480 GB480 GB560 / 530 MB/s97K / 60K IOPS2,628 TB (3.0 DWPD)2.3 WMixed-use, TLC
Samsung SM883 480 GB480 GB540 / 520 MB/s97K / 27K IOPS2,628 TB (3.0 DWPD)2.8 WMixed-use, MLC
Samsung PM893 480 GB480 GB550 / 520 MB/s98K / 29K IOPS876 TB (1.0 DWPD)3.2 WRead-intensive, TLC
Samsung PM883 480 GB480 GB550 / 520 MB/s98K / 24K IOPS683 TB (0.78 DWPD)2.3 WRead-intensive, TLC

Read straight across. This drive is third of seven on random write at 43K, behind the two Samsung mixed-use rows at 60K and ahead of every other row; fourth on write budget at 1,300 TB; fourth on endurance class at 1.48; fifth of seven on sequential write at 410 MB/s, ahead of the ECO and the M510DC at 380; fifth on random read, level with the ECO at 93K and ahead of the MLC drive at 63K; and second highest on power at 4.5 W.

The two Samsung mixed-use rows are ahead on every line, including power, and that is the honest position at this capacity: this drive is not the fastest mixed-use 480 GB part on the page. What it is, is the same platform and firmware as the ECO drives already in a build, with three times their write budget and the same 4.5 W, which matters when a fleet is qualified as one platform rather than as a specification sheet.

The step up from 240 GB, and what it costs

The 240 GB member is the other end of this tier and the comparison is clean: twice the capacity, twice the write budget, 64% more sequential write and 65% more random write, at the same 1.48 drive writes a day and the same 4.5 W. Nothing in the read path changes enough to notice. Where a build is choosing between one 480 GB drive and two 240 GB drives for the same space, the single larger drive wins on ports, cables, firmware records and rebuild time, and loses on the mirror's ability to survive a double failure.

The rebuild arithmetic is the practical tiebreaker. A full rewrite of 480 GB at 410 MB/s takes about 20 minutes, and a mirror is unprotected for that window; two 240 GB members rebuild in about 16 minutes each but occupy two bays. For a metadata volume that is rebuilt annually, 20 minutes is not a design constraint. For a volume rebuilt monthly on a tight window, the smaller pair is the safer layout.

Above this capacity the tier keeps climbing on both counts, and the 960 GB member is the next step for a build that needs a working volume rather than a boot device.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 480 GB the spread between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View