960 GB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK960TDC-1AT1ZABYY
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 1,750 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 28K IOPS |
| Power | 3.6 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5200 ECO 960 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK960TDC, ordering code MTFDDAK960TDC-1AT1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 28K random write IOPS at 4 KB, 1,750 TBW — one drive write a day for five years — on Micron 64-layer 3D TLC, with 200 µs read and 300 µs write latency and capacitor-backed power-loss protection on TCG Enterprise. Stocked new or as tested pulls with a 1-year warranty from us.
At 960 GB the read-intensive tier finally stops paying for capacity with speed. Sequential write rises from 385 MB/s at 480 GB to the 520 MB/s the platform quotes at every capacity above it, random read recovers from 81K to 95K, and the write budget doubles to 1,750 TB. Only one figure goes backwards, and it is the small-block one: random write drops from 33K to 28K. This page is about that trade, because at this capacity it is the only thing standing between the drive and a clean specification.
Three of the four performance numbers improve, and the exception is worth stating plainly. Sequential write gains 35%, from 385 to 520 MB/s, which matters because the 480 GB member is the only capacity in the tier that sits below the figure every larger member quotes. Random read gains 17%, from 81K to 95K, because twice the bytes means twice the die behind the same controller, and small-block reads scale with the number of packages the controller can address in parallel. Random write moves the other way, from 33K to 28K.
The published figures do not explain that drop, and this page will not invent a mechanism for it. What can be said is what it costs in practice: a volume that leans on concurrent 4 KB writers, such as a transaction log with a deep queue, gets 15% fewer of them here than at 480 GB. At 28K the drive still sits above the PM883 at this capacity and level with the previous generation's ECO, so the loss narrows a gap rather than opening one.
Everything else scales the way the tier says it should. Capacity doubles, the write budget doubles from 870 to 1,750 TB, and the power envelope does not move at all: the same 3.6 W maximum on sequential write, 3.0 W on sequential read and 1.5 W idle. Twice the bytes inside the same quoted maximum is the whole of that gain, and it is a real one on a shelf that is power-limited rather than bay-limited.
The other thing this capacity does is remove a regression that the previous page in this tier had to explain. At 480 GB the 64-layer generation reads random blocks 13% slower than the 32-layer one it replaced, because fewer packages were behind the same capacity. At 960 GB that penalty is gone: this drive quotes 95K against the 5100 ECO 960 GB at 93K, so the newer generation is now ahead on random read as well as on endurance.
| Product family | Micron 5200 ECO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK960TDC (catalogue code) |
| Ordering code | MTFDDAK960TDC-1AT1ZABYY |
| Capacity | 960 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 64-layer 3D TLC |
| Sequential read / write | 540 MB/s / 520 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 95K IOPS read / 28K IOPS write |
| Mixed 70/30 4 KB | 49K IOPS |
| Quality of service | 200 µs read / 300 µs write at the 99.9th percentile; 1,000 µs / 700 µs at the 99.999th |
| Endurance | 1,750 TBW — 1.0 DWPD over five years |
| TBW basis | Drive held full under a random write workload over the five-year rating period |
| Power | 3.6 W maximum on sequential write, 3.0 W maximum on sequential read, 1.5 W idle; supply 5 V at the connector |
| Power-loss protection | Yes — data-protection capacitor with capacitor monitoring reported by firmware |
| Data security | AES 256-bit encryption, TCG Enterprise configurability |
| DRAM cache | Yes |
| Features | Flex Capacity, end-to-end data path protection, adaptive thermal monitoring, RAIN recovery, S.M.A.R.T., secure and fast erase, secure firmware |
| Reliability | MTTF 3.0 million device hours; UBER under 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz |
1,750 TB over five years is 959 GB of writes every day, one full fill of the drive. Written flat out at 520 MB/s the whole allowance would last about 39 days; the rating assumes that daily allowance spread across 1,825 days instead. A boot and log pair writing 80 GB a day uses 8% of the allowance, and a cache that rewrites a fifth of its capacity daily — 192 GB — uses 20%. Both sit inside the rating for the full five years with room to spare.
Against the previous generation at this capacity the budget is 1.94 times larger: the 5100 ECO 960 GB carries 900 TBW at 0.51 drive writes a day. That is the single strongest reason to specify this drive instead, because the rest of the specification is close: the same 540/520 MB/s, 95K against 93K random read, and 28K random write on both.
Against the tiers above it the budget is behind, and deliberately so. The 5100 PRO 960 GB carries 4,400 TB at 2.5 drive writes a day and the MAX member 8,800 TB at five, both still at 540/520 MB/s. This drive is the read-intensive tier: it writes once a day, and a volume that writes more than that should be buying the tier above rather than stretching this one.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK960TDC | Catalogue code | New / used | Enquire |
| MTFDDAK960TDC-1AT1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 960 is the capacity, and the block after it identifies the series and tier. TDC is 5200 ECO; the same family reserves TDD for PRO and TDN for MAX, and the previous generation used TBY, TCB and TCC in those positions. The configuration string also changed generation to generation: this drive ends in -1AT1ZABYY rather than the -1AR1ZABYY of the 5100 family, so the suffix after the hyphen is a reliable second check at goods-in.
The capacity block is the part that gets misread, because 960 GB sits beside 1.92 TB in the same family and the two look alike on a shelf. Read the digits before the tier block, not the label colour or the case, and check the total on the carton against the count of drives: a pallet of 960 GB units and a pallet of 1.92 TB units differ by nothing you can see from the outside.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5200 ECO 960 GB | 960 GB | 540 / 520 MB/s | 95K / 28K IOPS | 1,750 TB (1.0 DWPD) | 3.6 W max | Read-intensive, 64-layer TLC |
| Micron 5100 ECO 960 GB | 960 GB | 540 / 520 MB/s | 93K / 28K IOPS | 900 TB (0.51 DWPD) | 5 W typ | Read-intensive, 32-layer TLC |
| Micron 5100 PRO 960 GB | 960 GB | 540 / 520 MB/s | 93K / 37K IOPS | 4,400 TB (2.5 DWPD) | 5 W typ | Mixed-use, 3D eTLC |
| Micron 5100 MAX 960 GB | 960 GB | 540 / 520 MB/s | 93K / 74K IOPS | 8,800 TB (5.0 DWPD) | 5 W typ | Write-intensive, 3D eTLC |
| Micron M510DC 960 GB | 960 GB | 420 / 380 MB/s | 65K / 10.5K IOPS | 1,140 TB (0.65 DWPD) | 6.3 W | Mixed-use, 16nm MLC |
| Samsung PM893a 960 GB | 960 GB | 560 / 530 MB/s | 97K / 31K IOPS | 1,752 TB (1.0 DWPD) | 2.1 W | Read-intensive, TLC |
| Samsung PM883 960 GB | 960 GB | 550 / 520 MB/s | 98K / 25K IOPS | 1,366 TB (0.78 DWPD) | 2.3 W | Read-intensive, TLC |
Read straight across. This drive is third on sequential read at 540 MB/s, level with the three 5100 rows and behind the two Samsung TLC rows at 550 and 560; second on sequential write at 520 MB/s, level with four rows and behind only the 530 of the PM893a; third on random read at 95K, behind 97K and 98K; and fourth on random write at 28K, level with the 5100 ECO and ahead of the PM883 at 25K.
On durability it is fourth at 1,750 TB, two terabytes behind the PM893a and 1.5 times the M510DC, and its one-fill-a-day rating is shared with the PM893a two terabytes up the column. On power the 3.6 W is a maximum rather than a typical figure, so it sits between the 2.1 and 2.3 W of the two Samsung rows and the 5 W the Micron tiers above quote, and none of those three sets of numbers is directly comparable with the others. The 1.5 W idle figure is the one that governs a mostly-idle shelf.
Two rows decide most purchases. Against the PM893a the differences are small and specific: 20 MB/s of read, 10 MB/s of write, 2K of random read, 3K of random write, and two terabytes of budget, with the Samsung drive drawing less power on a typical basis. Against the 5100 ECO the differences are much larger on paper — 1.94 times the budget, 2K more random read — and that is the honest summary of this generation: a durability step with the small-block regression of the 480 GB member resolved.
The ECO tier of this generation runs 480 GB, 960 GB, 1.92 TB, 3.84 TB and 7.68 TB, and the budget scales with the bytes: 870, 1,750, 3,500, 7,700 and 8,400 TB, with the rating holding at a fill a day through 1.92 TB, stepping to 1.1 at 3.84 TB and dropping to 0.6 at the top capacity. Sequential read holds at 540 MB/s throughout, and sequential write reaches its 520 MB/s ceiling here and stays there — the 480 GB member is the only one that sits below it, at 385.
Random read climbs from 81K to 95K between those two capacities and then holds, while random write slides the length of the ladder: 33K, 28K, 22K, 17K and 9.5K. So 960 GB is the last capacity where small-block write still sits in the high twenties, and 480 GB is the last where random read is the weaker number. Everything above 960 GB — starting with the 1.92 TB member at 22K — buys bytes and budget and accepts a lower small-block write rate in exchange.
The top of the ladder is the one place the budget-per-byte rule breaks. 7.68 TB carries 8,400 TB, only 9% more than the 3.84 TB member's 7,700 on twice the bytes, so the largest capacity is for density rather than for writers. For a 960 GB volume the decision is simpler: this drive if the working set is read-mostly and writes about a fill a day, the PRO tier if it writes twice that, and two of these only where two bays and two rebuild windows are preferable to one — a full rebuild at 520 MB/s takes about 31 minutes.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 960 GB the difference between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV