480 GB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK480TBY-1AR1ZABYY
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 0.51 |
| TBW | 450 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 380 MB/s |
| Random Read IOPS | 93K IOPS |
| Random Write IOPS | 31K IOPS |
| Power | 4.5 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5100 ECO 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480TBY, ordering code MTFDDAK480TBY-1AR1ZABYY. 540 MB/s sequential read, 380 MB/s sequential write, 93K random read and 31K random write IOPS at 4 KB, 450 TBW on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
At this capacity there are two Micron drives that look like the same purchase and are not. The M510DC at 480 GB carries 1,850 TBW and 23K random write; this 5100 ECO carries 450 TBW and 31K, on a faster read path — 540 MB/s and 93K random read against 420 and 63K — at 4.5 W instead of 6 W. One is the endurance drive and one is the speed-and-efficiency drive, and the gap between them is a factor of four in write budget, not a rounding difference.
Both drives read the same SATA link, so the difference is where the work happens. The 5100 ECO is built on 3D enterprise TLC and reaches 93K random read at 4 KB, 48% above the 16nm MLC part at the same capacity, with 31K random write against 23K. Sequential write lands at 380 MB/s on both, and sequential read is 540 against 420. The power figure drops from 6 W to 4.5 W at the same time, which matters in a chassis that holds twenty-four of them.
What it gives up is write endurance, and the exchange rate is steep: 450 TBW against 1,850, so the MLC drive carries 4.1 times the budget for the same bytes. In daily terms this drive is rated 0.5 drive writes a day — 247 GB of writes every day for five years — where the M510DC is rated 2.1. For a read-heavy tier neither number is ever approached; for a volume that rewrites itself daily, the 5100 ECO reaches end of rating in a fraction of the time.
The lesson of the pair is that capacity and generation do not tell you which drive is the upgrade. At 480 GB the newer, faster, cooler drive is also the shorter-lived one, and the choice between them is a choice about the workload rather than about which part is newer.
One capacity up, the arithmetic changes. The 960 GB member keeps the same 540 MB/s read, the same 93K random read and the same half-a-drive-write-a-day rating, but its sequential write rises to 520 MB/s — 37% above this drive — because that is where the extra die count starts to pay. Random write drops slightly to 28K and endurance doubles to 900 TB with the bytes.
| Product family | Micron 5100 ECO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK480TBY (catalogue code) |
| Ordering code | MTFDDAK480TBY-1AR1ZABYY |
| Capacity | 480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 3D enterprise TLC (eTLC) |
| Sequential read / write | 540 MB/s / 380 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 93K IOPS read / 31K IOPS write |
| Quality of service | 500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999% |
| Endurance | 450 TBW — 0.51 DWPD over five years, the 0.5-drive-writes-a-day class |
| TBW basis | Drive held full under a random write workload over the five-year rating period |
| Power | Typical 4.5 W; supply 5 V at the connector |
| Power-loss protection | Yes — data-protection capacitor with capacitor monitoring reported by firmware |
| Data security | AES 256-bit encryption, TCG Enterprise 1.0 SED |
| DRAM cache | Yes |
| Features | End-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase |
| Reliability | MTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz |
450 TB over five years is 247 GB of writes every day, a little over half a full fill of the drive. Written flat out at 380 MB/s the rating would last about 14 days, which sounds alarming until the same arithmetic is applied to any drive: endurance ratings assume a daily allowance spread across 1,825 days, and no drive run at its ceiling survives long.
For planning, think in fills rather than terabytes. A 480 GB volume that rewrites a quarter of its content daily uses 120 GB, or 49% of the allowance. A volume that rewrites everything once a day uses 194% and halves the rated life. Between those two sits almost every read-intensive workload this drive is sold for: web caches, image stores, published datasets, boot volumes, appliance system disks — all of which write little relative to what they read.
The number that makes the trade concrete is the comparison with the same-capacity MLC drive. At 1,850 TBW the M510DC tolerates 1,013 GB a day, four times this allowance. If a workload needs more than 247 GB a day and the platform must stay on this generation of Micron parts, the M510DC is the correct device; if it does not, this drive is faster on every read path and draws less power doing it.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK480TBY | Catalogue code | New / used | Enquire |
| MTFDDAK480TBY-1AR1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 480 is the capacity, the block after it identifies the family and tier, and everything after the hyphen is the configuration string Micron assigns at order entry. The suffix -1AR1ZABYY is assigned per SKU, so quote the full string when the endurance tier matters.
That matters because the 5100 platform ships in three endurance tiers — ECO, PRO and MAX — across the same capacities and the same 7 mm case, and the tiers differ by a multiple in write budget rather than by a few percent. A 480 GB 5100 in the MAX tier carries nearly ten times this drive's TBW; a PRO sits between them. If a bill of materials specifies ECO, substituting either of the others changes the endurance class of the deployment, and a quote written against a generic "5100 480GB" is not specific enough to ship against.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| Micron 5100 ECO 480 GB | 480 GB | 540 / 380 MB/s | 93K / 31K IOPS | 450 TB (0.51 DWPD) | Read-intensive, 3D eTLC |
| Micron M510DC 480 GB | 480 GB | 420 / 380 MB/s | 63K / 23K IOPS | 1,850 TB (2.1 DWPD) | Read-intensive, 16nm MLC |
| Samsung PM893 480 GB | 480 GB | 550 / 520 MB/s | 98K / 29K IOPS | 876 TB (1.0 DWPD) | Read-intensive, TLC |
| Samsung PM883 480 GB | 480 GB | 550 / 520 MB/s | 98K / 24K IOPS | 683 TB (0.78 DWPD) | Read-intensive, TLC |
| Samsung PM863a 480 GB | 480 GB | 520 / 480 MB/s | 97K / 16K IOPS | 683 TB (0.78 DWPD) | Read-intensive, TLC |
| Samsung SM883 480 GB | 480 GB | 540 / 520 MB/s | 97K / 27K IOPS | 2,628 TB (3.0 DWPD) | Mixed-use, MLC |
| Samsung SM863a 480 GB | 480 GB | 510 / 485 MB/s | 95K / 19K IOPS | 3,080 TB (3.5 DWPD) | Mixed-use, MLC |
Read the throughput columns first: this drive is first of seven on random write, ahead of both mixed-use MLC parts and every TLC part on the page, and sixth on random read, ahead only of the MLC drive at the same capacity. Read the endurance column second: it is last, below the 683 TB of the two Samsung read-intensive drives and well below the 3,080 TB of the SM863a.
So the purchase is easy to state. If the tier reads and caches and the write volume sits inside 247 GB a day, this is the fastest 480 GB SATA drive on the page per watt and per dollar of latency, and the endurance rating is irrelevant to the deployment. If the tier writes, the two MLC parts in the table carry four to seven times the budget for 90 to 100 MB/s less sequential write, and that is the trade to make.
There is a third answer between the two, and it is the same platform: the 5100 PRO at 480 GB carries 1,300 TBW at 1.48 drive writes a day, writes at 410 MB/s and serves 43K random write, with the same 540 MB/s read, the same 93K random read and the same 4.5 W this drive draws. That is 2.9 times the write budget on the same capacity, power and firmware line, and it is the option to take when the daily write volume sits between 247 GB and the price of the MLC tier.
The next generation of this tier is on the site as well: the 5200 ECO at 480 GB carries 870 TBW at one drive write a day, writes at 385 MB/s and serves 33K random write, with 81K random read against this drive's 93K. Nearly twice the endurance and a slightly faster write path, at the cost of 12K of random read.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day. If the host uses TCG Enterprise key management, say so when you enquire and we will confirm the drive's security state before it ships; matched sets for a mirror are selected from a single batch where stock allows.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV