Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK480TCC · Micron

Micron 5100 MAX 480GB SATA SSD (MTFDDAK480TCC)

480 GB 2.5-inch SATA write-intensive SSD, ordering code MTFDDAK480TCC-1AR1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK480TCC
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 480 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 5
TBW 4,400 TB
Sequential Read 540 MB/s
Sequential Write 460 MB/s
Random Read IOPS 93K IOPS
Random Write IOPS 74K IOPS
Power 4.5 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK480TCC and the ordering code is MTFDDAK480TCC-1AR1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 480 is the capacity, and TCC is the MAX tier block, which differs from the PRO and ECO blocks at the same capacity. The suffix after the hyphen is assigned per SKU.

Overprovisioning is at its most generous relative to the die count here, and the die count is high enough to keep all four controller channels fed. Random write therefore rises from 48K at 240 GB to 74K here, a 54% gain, and falls again at larger capacities where the spare area is spread more thinly per byte. Sequential write rises in the same step, from 310 to 460 MB/s.

Same controller, firmware and die, different overprovisioning. MAX carries 4,400 TBW at 5.0 drive writes a day against 1,300 TB at 1.48, serves 74K random write against 43K, and writes sequentially at 460 MB/s against 410. Power is identical at 4.5 W and read speed is identical at 540 MB/s and 93K, so the whole difference is the write path.

4,400 TB over five years is 2,411 GB a day. A journal at 400 GB a day uses 17% of that and a write cache turning over its full 480 GB four times a day uses 80%, which is the intended duty cycle for this tier. The same workload on a read-intensive drive at this capacity would run several times over its rating.

Yes, FIPS 140-2 validation, on top of the AES 256-bit encryption and TCG Enterprise 1.0 self-encryption carried by all three tiers. The tier block TCC is what identifies a validated unit, and the validation mode can be queried on the drive before it ships.

Both. A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops, and the drive is a TCG Enterprise 1.0 self-encrypting unit with AES 256-bit encryption and FIPS 140-2 validation. TCG Enterprise is not the same as consumer TCG Opal 2.0 and needs a controller or key-management stack that speaks it.

Micron 5100 MAX 480 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK480TCC, ordering code MTFDDAK480TCC-1AR1ZABYY. 540 MB/s sequential read, 460 MB/s sequential write, 93K random read and 74K random write IOPS at 4 KB, 4,400 TBW — five drive writes a day for five years — on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption, FIPS 140-2 validation and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

This is the peak of the write-intensive tier, and by one figure it is the peak of anything we list at this capacity: 74K random write, above the 60K of the two mixed-use Samsung rows at 480 GB and 72% above the PRO member of its own platform. The write budget doubles from the 240 GB member to 4,400 TBW, and sequential write climbs from 310 to 460 MB/s because the die count doubles with the capacity. Power does not move: 4.5 W, the same as the 240 GB MAX and the same as the PRO drives above and below it.

Why this capacity is the peak of the write-intensive tier

Two curves meet at 480 GB. Overprovisioning is at its most generous relative to the die count, and the die count is now high enough to keep the controller's four channels fed. That is why random write steps from 48K at 240 GB to 74K here — a 54% gain — while sequential write steps from 310 to 460 MB/s, and why both figures fall again at larger capacities where the spare area is spread more thinly per byte.

The endurance rating does not change, because it is set by the tier rather than by the capacity: five drive writes a day at every size. What changes is the absolute budget, which doubles with the bytes, from 2,200 TB to 4,400 TB, and the small-block throughput, which is the figure that decides how a write-intensive volume behaves when the queue is deep.

Read performance is the one thing the tier does not buy. Sequential read stays at 540 MB/s and random read at 93K, the same as the PRO and ECO drives at this capacity, so a build that is read-bound gains nothing from MAX and pays for endurance it will not use. That is the trade this page exists to make explicit.

Technical specifications

Product familyMicron 5100 MAX (SATA NAND Flash SSD, write-intensive data centre)
PNMTFDDAK480TCC (catalogue code)
Ordering codeMTFDDAK480TCC-1AR1ZABYY
Capacity480 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 3D enterprise TLC (eTLC), 32-layer
Sequential read / write540 MB/s / 460 MB/s (128 KB, steady state)
Random 4 KB (QD32)93K IOPS read / 74K IOPS write
Mixed 70/30 4 KB70K IOPS
Quality of service500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999%
Endurance4,400 TBW — 5.0 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
PowerTypical 4.5 W; idle 2.5 W; supply 5 V at the connector
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise 1.0 SED, FIPS 140-2 validated
DRAM cacheYes, LPDDR3
FeaturesEnd-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

What 4,400 TBW means at 480 GB

4,400 TB over five years is 2,411 GB of writes every day, five full fills of the drive. Written flat out at 460 MB/s the whole allowance would last about 111 days; the rating assumes that daily allowance spread across 1,825 days. A journal writing 400 GB a day uses 17% of the allowance, a write cache turning over its full capacity four times a day uses 80%, and the same workload on the read-intensive drive at this capacity would sit at several times its rating.

Against the PRO member at this capacity the step is 3.4 times the budget, 72% more random write and 12% more sequential write, at the same 4.5 W and the same 540 MB/s read. Against the older MLC platform, the M510DC 480 GB carries 1,850 TB at 2.1 drive writes a day, 42% of this budget, with 420 MB/s read and 23K random write.

Against the mixed-use parts from the other platform the budget is no longer the lead: the PM897a at 480 GB carries 2,628 TB at 3.0 drive writes a day and the SM883 at 480 GB the same, both below this drive on budget while quoting 530 and 520 MB/s sequential write against 460. Where this drive wins against them is the small-block queue, 74K against 60K and 27K, and that is the figure a write-intensive volume actually lives in.

Ordering codes and the tier block

CodeTypeConditionQuote
MTFDDAK480TCCCatalogue codeNew / usedEnquire
MTFDDAK480TCC-1AR1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 480 is the capacity, and the block after it identifies the tier and the interface. TCC is the MAX block, the only one of the three that carries FIPS 140-2 validation alongside TCG Enterprise. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU.

At goods-in, and especially on used stock, the tier block is the number to check before the capacity. A 480 GB drive from this platform exists in three tiers with the same case, the same 540 MB/s read and the same 4.5 W; the two endurance extremes are 450 TB and 4,400 TB, a tenfold difference that no external marking other than the tier block reveals.

How it compares across the 480 GB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 MAX 480 GB480 GB540 / 460 MB/s93K / 74K IOPS4,400 TB (5.0 DWPD)4.5 WWrite-intensive, 3D eTLC
Micron 5100 PRO 480 GB480 GB540 / 410 MB/s93K / 43K IOPS1,300 TB (1.48 DWPD)4.5 WMixed-use, 3D eTLC
Micron 5100 ECO 480 GB480 GB540 / 380 MB/s93K / 31K IOPS450 TB (0.51 DWPD)4.5 WRead-intensive, 3D eTLC
Micron M510DC 480 GB480 GB420 / 380 MB/s63K / 23K IOPS1,850 TB (2.1 DWPD)6 WMixed-use, 16nm MLC
Samsung PM897a 480 GB480 GB560 / 530 MB/s97K / 60K IOPS2,628 TB (3.0 DWPD)2.3 WMixed-use, TLC
Samsung SM883 480 GB480 GB540 / 520 MB/s97K / 27K IOPS2,628 TB (3.0 DWPD)2.8 WMixed-use, MLC
Samsung PM893 480 GB480 GB550 / 520 MB/s98K / 29K IOPS876 TB (1.0 DWPD)3.2 WRead-intensive, TLC

Read straight across. This drive is first of seven on write budget at 4,400 TB, first on endurance class at 5.0 and first on random write at 74K. It is fourth on sequential write at 460 MB/s, behind three rows at 520 MB/s and above; level with three other rows on sequential read at 540, behind only the 550 and 560 MB/s rows; fourth on random read at 93K, level with the other two 5100 rows; and level with the ECO and PRO rows on power at 4.5 W, below only the MLC drive at 6 W.

So the shape is clear: it leads every endurance and small-block figure in the table and trails in streaming write. For a journal, a write cache, an OLTP log volume or a metadata partition that is exactly the right way round. For a backup staging area, a restore target or a media scratch volume it is the wrong way round, and the PM893 or PM883 at 520 MB/s with a fifth of the budget would serve better for less.

Where MAX sits above PRO at the same capacity

The two tiers share one controller, one firmware line and one die; MAX simply places far more NAND behind the rated capacity, which is what pays for five drive writes a day instead of 1.48. At this capacity that shows up as 4,400 TB against 1,300 TB, 74K against 43K random write, and 460 against 410 MB/s sequential write, at an identical 4.5 W and an identical 540 MB/s read.

One size down, the 240 GB MAX member carries half the budget at 2,200 TB and 48K random write, with 310 MB/s sequential write, so the 480 GB capacity is the one to take where the volume writes small blocks and also has to ingest a stream. Above this capacity the tier continues at the same 5.0 rating and reaches 520 MB/s sequential write, and random write holds at 74K through 960 GB before easing to 66K at 1.92 TB, so a larger MAX buys bytes and budget in proportion with very little else changing.

Where the choice is genuinely close, it is between this drive and a larger PRO. A 960 GB PRO carries 4,400 TBW as well, the same budget as this drive, on twice the bytes and with 37K random write against 74K. A volume that needs space takes the PRO; a volume that needs to absorb a write queue takes this one, because 74K against 37K is the difference the cache in front of it will feel.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 480 GB a MAX drive is bought precisely because it has been written to, so the percentage-used counter and the total LBAs written are the first two figures to ask about on any used unit. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View