Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK3T8TDC · Micron

Micron 5200 ECO 3.84TB SATA SSD (MTFDDAK3T8TDC)

3.84 TB 2.5-inch SATA read-intensive SSD, ordering codes MTFDDAK3T8TDC-1AT1ZABYY and -1AT16ABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK3T8TDC
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 3.84 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1.1
TBW 7,700 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 95K IOPS
Random Write IOPS 17K IOPS
Power 3.6 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK3T8TDC and we supply two ordering codes at this capacity, MTFDDAK3T8TDC-1AT1ZABYY and MTFDDAK3T8TDC-1AT16ABYY. MTFDDAK is the prefix for Micron SATA drives in the 2.5-inch 7 mm form factor, 3T8 is the 3.84 TB capacity block, and TDC is the 5200 ECO tier. The difference between the two codes sits inside the configuration block and does not change the drive.

Because 7,700 TB over five years is 4,219 GB a day against 3,840 GB of capacity, which is 10% more than one full fill. The rest of the tier holds at one fill a day from 480 GB through 1.92 TB and the 7.68 TB member drops to 0.6, so this is the only capacity in the family rated above a fill. A volume writing 4 TB a day sits just inside this rating and just outside a one-fill one.

At the 99.9th percentile the write figure goes from 300 to 500 microseconds, and at the 99.999th percentile from 700 microseconds to 10 milliseconds, while read latency stays at 200 and 1,000 microseconds. A service level written against the 99.9th percentile will not notice; a worst-case budget that assumes a sub-millisecond write tail will. Where the tail matters, the 1.92 TB member keeps the shorter one.

It is 4,219 GB a day for five years. A boot and log pair writing 80 GB a day uses 2% of that allowance and a cache rewriting a fifth of its capacity daily uses 18%, so both stay well inside the rating. A volume that writes more than 1.1 fills a day should move to the PRO tier at 17,600 TB rather than stretch this drive.

The drive carries AES 256-bit encryption and TCG Enterprise is enabled through the controller, but self-encrypting configurations are separate builds with their own ordering blocks, and OEM channels add a third pattern on top. If a build requires encryption at rest, ask for a self-encrypting block explicitly rather than assuming the standard code arrives enabled.

A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops. The 5 V 1.7 A on the label is the connector input ceiling, 8.5 W, not a measured draw: the drive itself is rated 3.6 W maximum on sequential write, 3.0 W on sequential read and 1.5 W idle. Size the rail against the label and the thermal budget against the performance figures.

Micron 5200 ECO 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK3T8TDC, supplied under ordering codes MTFDDAK3T8TDC-1AT1ZABYY and MTFDDAK3T8TDC-1AT16ABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 17K random write IOPS at 4 KB, 7,700 TBW — 1.1 drive writes a day for five years — on Micron 64-layer 3D TLC, with 200 µs read and 500 µs write latency at the 99.9th percentile and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

Two things make this capacity different from the rest of the tier, and both are easy to miss on a specification sheet. It is the only capacity rated above one drive fill a day, at 1.1, which puts 7,700 TB behind 3.84 TB of address space. And it is the capacity where the write tail latency steps: the 99.9th percentile write figure doubles from 300 µs to 500 µs, and the 99.999th percentile goes from 700 µs to 10 ms.

Why this is the only capacity rated above a fill a day

The tier is rated one drive write a day from 480 GB through 1.92 TB, and this capacity breaks that pattern at 1.1. 7,700 TB over five years is 4,219 GB a day against 3,840 GB of capacity, so the rating is a genuine 10% above a full fill rather than a rounded figure. The 7.68 TB member goes the other way and drops to 0.6, which is why the endurance curve across this family is not a straight line: it holds at one, rises slightly here, and falls at the top.

That matters at the point of purchase in a way that endurance numbers usually do not. A 3.84 TB volume writing 4 TB a day sits exactly at the edge of a one-fill rating and slightly inside this one, and the difference between the two is the difference between a drive that stays inside its allowance for five years and a drive that does not. The same arithmetic is why this capacity is the sensible ceiling for a write-tolerant read-intensive build: above it the budget per terabyte falls away sharply.

The read path is unchanged from the smaller members: 540 MB/s sequential, 95K random read, 200 µs at the 99.9th percentile. Sequential write stays at the platform's 520 MB/s. What has changed is small-block write, which slides from 22K at 1.92 TB to 17K here — the lowest figure in this tier and the one to weigh if the volume carries concurrent writers.

Technical specifications

Product familyMicron 5200 ECO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK3T8TDC (catalogue code)
Ordering codesMTFDDAK3T8TDC-1AT1ZABYY and MTFDDAK3T8TDC-1AT16ABYY
Capacity3.84 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 64-layer 3D TLC
Sequential read / write540 MB/s / 520 MB/s (128 KB, steady state)
Random 4 KB (QD32)95K IOPS read / 17K IOPS write
Quality of service200 µs read / 500 µs write at the 99.9th percentile; 1,000 µs / 10,000 µs at the 99.999th
Endurance7,700 TBW — 1.1 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
Power3.6 W maximum on sequential write, 3.0 W maximum on sequential read, 1.5 W idle; connector rated 5 V 1.7 A
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise enabled through the controller; self-encrypting configurations carry their own ordering blocks
DRAM cacheYes
FeaturesFlex Capacity, end-to-end data path protection, adaptive thermal monitoring, RAIN recovery, S.M.A.R.T., secure and fast erase, secure firmware
ReliabilityMTTF 3.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

The write latency step at 3.84 TB

Latency is the figure that separates this capacity from its smaller siblings, and it moves in two places at once. At the 99.9th percentile the write figure rises from 300 µs at 960 GB and 1.92 TB to 500 µs. At the 99.999th percentile it leaves the sub-millisecond range entirely, from 700 µs to 10 ms — a fourteen-fold step on one of the two percentiles that matter most when a queue backs up. Read latency does not move: 200 µs and 1,000 µs at the same two percentiles.

That asymmetry is worth planning around rather than treating as a footnote. A volume whose service level is written against the 99.9th percentile will not notice the change; a volume whose worst-case budget assumes a sub-millisecond write tail will notice it on every slow moment, and 10 ms at the five-nines boundary is the number that ends up in an incident review. Where the tail matters, the 1.92 TB member holds the shorter tail at 700 µs and two of them hold the same bytes, at the cost of a second bay and a second rebuild.

Read the two percentiles together with the random write figure, because all three describe the same pressure from different angles. 17K random write and a 10 ms five-nines write tail are both symptoms of a drive whose controller is committing more bytes per unit of parallelism than the smaller members of the same family. Neither is a defect, and neither shows up in a sequential benchmark.

What 7,700 TBW means at 3.84 TB

7,700 TB over five years is 4,219 GB of writes every day, 1.1 fills of the drive rather than one. Written flat out at 520 MB/s the whole allowance would last about 171 days; the rating assumes that daily allowance spread across 1,825 days instead. A boot and log pair writing 80 GB a day uses 2% of the allowance, and a cache that rewrites a fifth of its capacity daily — 768 GB — uses 18%. A full rebuild at 520 MB/s takes about two hours, which is the number to quote when a maintenance window has to be planned rather than assumed.

Against the previous generation at this capacity the advantage is 20%: the 5100 ECO 3.84 TB carries 6,400 TB at 0.9 drive writes a day. That is a smaller gap than the 93% at 480 GB and the 94% at 960 GB, because the older tier raised its rating at the larger capacities while this one held at one fill and then stepped to 1.1 here.

Against the tiers above, the budget is behind and deliberately so: the PRO member carries 17,600 TB at 2.5 drive writes a day and 30K random write, both at the same 540/520 MB/s. This drive is the read-intensive tier at just over a fill a day; a volume that writes more than that should be buying the tier above rather than stretching this one.

Ordering codes, configuration blocks and OEM labels

CodeTypeConditionQuote
MTFDDAK3T8TDCCatalogue codeNew / usedEnquire
MTFDDAK3T8TDC-1AT1ZABYYOrdering codeNew / usedEnquire
MTFDDAK3T8TDC-1AT16ABYYOrdering codeNew / usedEnquire

The model number is the stable part. MTFDDAK is the prefix Micron uses for SATA solid-state drives in this form factor, 3T8 is the 3.84 TB capacity block, and TDC is the 5200 ECO tier; the family reserves TDD for PRO and TDN for MAX. Everything after the TDC belongs to the configuration block, and that is where the two codes we list differ: they share a prefix and diverge inside the block, one character apart.

Both are orderable at this capacity and both resolve to the same drive, so the block is a supply detail rather than a specification difference. It becomes a specification difference further out: the same capacity is also built in self-encrypting configurations, which carry their own distinct blocks, and OEM channels apply a third pattern. The unit photographed here is one of those, an OEM build labelled by a server vendor with an HPE model number beside the Micron one and a block ending neither ZABYY nor 6ABYY. If a build requires encryption at rest, ask for it explicitly rather than assuming the drive arrives enabled.

At goods-in, read the model field and the capacity block, then the ordering code. The capacity block is the field most often misread, because Micron writes terabyte capacities in decimal shorthand: 1T9 is 1.92 TB, 3T8 is 3.84 TB and 7T6 is 7.68 TB, while 480 and 960 are written as plain digits. A pallet of 3.84 TB and 1.92 TB units of the same family is indistinguishable from the outside.

How it compares across the 3.84 TB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5200 ECO 3.84 TB3.84 TB540 / 520 MB/s95K / 17K IOPS7,700 TB (1.1 DWPD)3.6 W maxRead-intensive, 64-layer TLC
Micron 5100 ECO 3.84 TB3.84 TB540 / 520 MB/s93K / 18K IOPS6,400 TB (0.9 DWPD)6 W typRead-intensive, 32-layer TLC
Micron 5100 PRO 3.84 TB3.84 TB540 / 520 MB/s93K / 30K IOPS17,600 TB (2.5 DWPD)6 W typMixed-use, 3D eTLC
Samsung PM893a 3.84 TB3.84 TB560 / 530 MB/s97K / 31K IOPS7,008 TB (1.0 DWPD)2.2 WRead-intensive, TLC
Samsung PM893 3.84 TB3.84 TB550 / 520 MB/s98K / 30K IOPS7,008 TB (1.0 DWPD)3.2 WRead-intensive, TLC
Samsung PM883 3.84 TB3.84 TB550 / 520 MB/s98K / 28K IOPS5,466 TB (0.78 DWPD)2.3 WRead-intensive, TLC
Samsung PM863a 3.84 TB3.84 TB520 / 480 MB/s97K / 24K IOPS5,466 TB (0.78 DWPD)4 WRead-intensive, TLC

Read straight across. This drive is second on write budget at 7,700 TB, behind only the mixed-use PRO member, and above every read-intensive row here including both Samsung 7,008 TB drives; it is the highest endurance figure of any read-intensive 3.84 TB drive we list. It is third on sequential read at 540 MB/s, level with the two 5100 rows and behind the 550 and 560 figures; second on sequential write at 520 MB/s, level with four rows and behind only the 530 of the PM893a; fifth on random read at 95K, behind four rows at 97K and 98K.

On random write it is last at 17K, below the 5100 ECO at 18K and well below the 24K to 31K the Samsung rows quote. That is the price of the endurance step and it is the one line to check against a real workload before specifying this drive for anything with a write queue. On power the 3.6 W is a maximum rather than a typical figure, so it sits above the 2.2 and 2.3 W of the two newest Samsung rows and the 3.2 of the PM893, and below the 6 W of the two Micron tiers above; the 1.5 W idle figure is the one that governs a mostly-idle shelf.

Two rows decide most purchases at this capacity. Against the PM893a the trade is endurance and price against throughput: 10% more write budget here, against 20 MB/s of read, 10 MB/s of write, 2K of random read, 14K of random write and lower power there. Against the 5100 ECO the newer drive wins on budget by 20% and on random read by 2K, and loses 1K of random write — a narrower generational gap than at any smaller capacity in this range.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 3.84 TB the spread between a low-hour pull and a high-hour one is wide enough to be worth asking about. Send the quantity, the condition you need, the ordering code your build specifies where it does, the platform the drives are going into, and whether OEM labelling is acceptable, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View