3.84 TB 2.5-inch SATA read-intensive SSD, ordering codes MZ7LM3T8HMLP-00005 / -000K0
| Capacity | 3.84 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 0.78 |
| TBW | 5,466 TB |
| Sequential Read | 520 MB/s |
| Sequential Write | 480 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 24K IOPS |
| Power | 4 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | SED |
| Condition | New · Used |
Samsung PM863a 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MZ7LM3T8HMLP, supplied under ordering code MZ7LM3T8HMLP-00005 or the OEM variant MZ7LM3T8HMLP-000K0. Rated 520 MB/s sequential read, 480 MB/s sequential write, 97K random read and 24K random write IOPS, 5,466 TBW, at 3 W read and 4 W write. Stocked new or as tested pulls with a 1-year warranty from us.
This is the top of the PM863a range, and the one capacity where the drive itself is no longer the interesting part of the decision. Performance is identical to the 960 GB and 1.92 TB members, and so is the write power, so nothing in the specification table rewards you for going bigger. What changes is the arithmetic of the array: fewer spindles carrying more bytes each, a longer rebuild, and a wider exposure window in the meantime. Buying this capacity is a decision about the array, not about the drive.
Underneath it is the usual 2016 read-intensive design — 48-layer V-NAND TLC, a Samsung Mercury controller with a DRAM write cache, 2 million hours MTBF, an AES 256-bit engine, end-to-end data protection and a 55 g case — plus the same 0.78 drive-writes-per-day rating that every capacity in the family carries.
Every figure that matters to a controller is unchanged from 1.92 TB: 520/480 MB/s, 97K/24K IOPS, 4 W on write. A shelf of these therefore behaves exactly like a shelf of the smaller drives, one bay at a time, while holding twice the data per bay. For a fixed chassis that is the whole argument — twenty-four 2.5-inch slots stop being a 46 TB problem and become a 92 TB one, on the same backplane, the same HBAs and the same power envelope per drive.
The cost lands later, in the degraded window. A SATA array rebuilds at roughly the sustained write rate the surviving members can spare, typically 150–200 MB/s once the controller and the backplane have their share, which puts a full 3.84 TB rebuild at five to seven hours rather than the two to three hours a 1.92 TB member needs. During those hours the array runs with one member missing: no redundancy, throughput down, and every read from the failed member's stripes served by reconstruction. Two failures in that window is a data-loss event, and larger members make the window larger.
That is why large members and one-disk-redundancy layouts stop being a good pair at this capacity. A RAID 5 of 3.84 TB drives spends a working day unprotected after each failure; the same drives under RAID 6 or RAID 10 — or in a mirrored boot pair with a separate capacity tier — keep the exposure bounded. Nothing about the drive changes that; it is simply what 3.84 TB per spindle means to a parity group.
| Product family | Samsung PM863a (V-NAND SSD, data centre / read-intensive) |
|---|---|
| PN | MZ7LM3T8HMLP (catalogue code) |
| Ordering codes | MZ7LM3T8HMLP-00005 (general) / MZ7LM3T8HMLP-000K0 (OEM variant) |
| Capacity | 3.84 TB (3,840 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 6.8 mm, max 55 g) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung Mercury, with DRAM write cache |
| NAND | Samsung V-NAND TLC (48-layer) |
| Sequential read / write | 520 MB/s / 480 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 24K IOPS write — 99% / 97% IOPS consistency |
| Endurance | 5,466 TBW — 0.78 DWPD over a 5-year basis; Samsung publishes 1.3 DWPD against a 3-year period |
| Power | Idle 1.3 W; active 3 W read / 4 W write; supply 5 V ±5% |
| Power-loss protection | Yes — Samsung specifies write-cache protection for this generation; no hold-up time is published |
| Data security | AES 256-bit encryption engine (self-encrypting drive); no TCG Opal |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., Dynamic Thermal Guard, end-to-end data protection |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read; operating 0 °C to 70 °C |
| Shock | 1,500 G at 0.5 ms, half sine wave |
| Status | End of life — Samsung has discontinued the PM863a generation |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7LM3T8HMLP | Catalogue code | New / used | Enquire |
| MZ7LM3T8HMLP-00005 | Ordering code | New / used | Enquire |
| MZ7LM3T8HMLP-000K0 | Ordering code | New / used | Enquire |
All three strings describe the same 3.84 TB drive, and it is worth knowing why there are three. Samsung's model numbering ends in a packing digit followed by a two-character customer code: -00005 is the general bulk code that most catalogues and asset registers quote, and -000K0 is the same drive built against a specific OEM customer code. The suffix governs packing and channel, not capacity, endurance or firmware behaviour. If your paperwork carries either one, quote it and we will match the drive to it.
The endurance number is the largest in the family and, as at every other capacity, it is exactly 0.78 drive-writes-per-day: 3 TB of writes every day for five years, against 1.5 TB at 1.92 TB and 0.75 TB at 960 GB. The percentage never moves; the absolute allowance doubles with capacity. At this size a single drive can absorb the boot pair, the application volume and a log directory without any of them touching the rating, which is the practical reason to buy the top capacity rather than two of the middle one.
Power is where the top two capacities converge. Write power stepped from 3 W to 4 W at 1.92 TB and does not step again here, so doubling from 1.92 TB to 3.84 TB costs no additional watts per drive — in fact the per-terabyte figure halves, from 2.1 W/TB to 1.0 W/TB written. Read power stays at 3 W and idle at 1.3 W at every capacity. If a shelf is already specified around 1.92 TB drives, this one slots into the same budget for the same watts and twice the bytes.
The limit is unchanged too. Sustained sequential write at 480 MB/s would consume 5,466 TB in about 132 days, so a genuinely write-heavy duty cycle still belongs on a mixed-use drive such as the SM863a rather than on a larger read-intensive one. Capacity buys headroom for the write tail of a read-mostly workload; it does not reclassify the drive.
Three things. Power-loss protection is specified but unquantified: Samsung's PM863a documentation states that the drive safeguards data in the write cache when power fails and adds end-to-end protection, but publishes no hold-up time — sound cover for a brief interruption, not a replacement for a controller with a battery or flash-backed cache. There is no TCG Opal, only a plain AES 256-bit engine, so encryption is managed in software rather than through key management on the drive. And the generation is out of production, which matters most at this capacity: a 3.84 TB member is usually part of a pool, and replacing it years from now means finding the same part number rather than any SATA drive of the same size.
Against the PM893 at 3.84 TB the current drive wins every column: 550/520 MB/s, 98K/30K IOPS, 7,008 TBW at a full 1.0 DWPD, a published PLP specification, TCG Opal 2.0, and 3.2 W against 4 W on the write side — higher endurance and lower power at the same capacity. What the PM863a offers in return is availability of the exact part number that existing arrays and controllers were qualified against, at a price that reflects a generation of depreciation.
Where this capacity is the wrong answer: a new build whose service life starts now, a pool that will be expanded capacity-first rather than bay-first, and any array that would run it under single-disk redundancy. Where it is right: an existing shelf that needs to grow without adding enclosures, a cold or read-mostly tier where the data is reproducible, and a fleet whose firmware and asset records are already keyed to MZ7LM3T8HMLP.
| Model | Capacity | Sequential read / write | Random read / write | Endurance | Active power |
|---|---|---|---|---|---|
| PM863a 240 GB | 240 GB | 330 / 300 MB/s | 86K / 9K IOPS | 341 TB (0.78 DWPD) | 3 / 3 W |
| PM863a 480 GB | 480 GB | 520 / 480 MB/s | 97K / 16K IOPS | 683 TB (0.78 DWPD) | 3 / 3 W |
| PM863a 960 GB | 960 GB | 520 / 480 MB/s | 97K / 24K IOPS | 1,366 TB (0.78 DWPD) | 3 / 3 W |
| PM863a 1.92 TB | 1.92 TB | 520 / 480 MB/s | 97K / 24K IOPS | 2,733 TB (0.78 DWPD) | 3 / 4 W |
| PM863a 3.84 TB | 3.84 TB | 520 / 480 MB/s | 97K / 24K IOPS | 5,466 TB (0.78 DWPD) | 3 / 4 W |
The table has one step in it and it sits between the third and fourth rows: everything from 960 GB up shares the same performance, and everything from 1.92 TB up shares the same write power. Read upwards and the top three capacities differ only in how much data they hold and how many bytes they can absorb before the rating is spent — a difference of 2× per step, not a change in behaviour. That is why the choice between 1.92 TB and 3.84 TB comes down to bay count and rebuild policy rather than to any number in the specification.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
Pricing is quoted per order because condition and quantity both move it. Send the quantity, the condition you need and the server model the drive is going into, and you will get a quote with lead time the same working day. Parity groups take more than two of these and we will match units from a single batch where stock allows, including firmware revision and ordering suffix. Because the PM863a generation is end-of-life, larger quantities are quoted against confirmed stock rather than a standing lead time.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV