3.84 TB 2.5-inch SATA read-intensive SSD, ordering codes MZ7L33T8HELA-00A07 and -00B07
| Capacity | 3.84 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 7,008 TB |
| Sequential Read | 560 MB/s |
| Sequential Write | 530 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 31K IOPS |
| Power | 2.2 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM893a 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MZ7L33T8HELA, supplied as -00A07 or -00B07. 560 MB/s sequential read, 530 MB/s sequential write, 97K random read and 31K random write IOPS, 7,008 TBW at 1.0 drive-writes-per-day over five years, with TCG Opal 2.0 as standard. Stocked new or as tested pulls with a 1-year warranty from us.
This capacity does not buy speed over the drives below it. The 1.92 TB member and this drive are identical at 560/530 MB/s and 97K/31K IOPS, and so is the 960 GB below that — from 960 GB upward the read-intensive PM893a does not change a single performance number. What changes is capacity, and with it the write budget: 7,008 TB at an unchanged 1.0 DWPD, which is 3.84 TB every day for five years.
What also changes, and is rarely written down, is the rebuild. A 3.84 TB member of a mirror written back at 530 MB/s takes about two hours before the array is protected again — twice the window of the 1.92 TB and four times the 960 GB. On a read-mostly tier that is usually the binding constraint, not endurance, and it is the reason arrays this size are more often built with parity than with two-way mirrors.
Against the plain PM893 at the same capacity the endurance is exactly the same 7,008 TBW, the sequential figures are 10 MB/s higher here, random write is 1K higher and random read 1K lower. At this capacity the "a" revision is not a performance or endurance step at all — it is TCG Opal 2.0 written into the specification as standard and endurance published on a five-year basis rather than a three-year one.
Bay density, mostly. Ten of these in a 1U chassis is 38.4 TB raw, which is the same number four times over compared with ten 960 GB drives, and it arrives with a quarter of the ports, cables and firmware records to manage. For a read-mostly tier that is sized in tens of terabytes, that arithmetic is the whole case for the capacity.
It also doubles the write budget of the capacity below it — 7,008 TB — without changing the daily intensity. The rate stays at 1.0 drive-writes-per-day; only the total moves, because it is the capacity that moved. That matters if the drive is a staging or repository volume that gets rewritten on a schedule rather than a boot disk that never is.
It does not buy a better drive than the 1.92 TB, and the 7.68 TB member does not buy a better one than this. Every figure except capacity and total endurance is identical, including latency and power, so the only reason to take this one is that the working set needs the room or the array needs fewer members.
| Product family | Samsung PM893a (V-NAND SSD, data centre / read-intensive) |
|---|---|
| PN | MZ7L33T8HELA (catalogue code) |
| Ordering codes | MZ7L33T8HELA-00A07 and MZ7L33T8HELA-00B07 |
| Capacity | 3.84 TB (3,840 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm, max 70 g) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung in-house controller, with DRAM cache |
| NAND | Samsung V-NAND TLC, read-intensive over-provisioning |
| Sequential read / write | 560 MB/s / 530 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 31K IOPS write |
| Latency | 120 µs read / 40 µs write at QD1 |
| Endurance | 7,008 TBW — 1.0 DWPD over a five-year basis (Samsung states five years directly; no three-year conversion needed) |
| Power | Active read 2.2 W; active write 3.2 W (typical, 4 KB random read / 128 KB write) |
| Power-loss protection | Yes — Samsung documents power-loss safeguards for this generation; no hold-up time is published |
| Data security | AES 256-bit full-disk encryption; TCG Opal 2.0 and IEEE 1667 encrypted drive |
| Features | TRIM (OS support required), Garbage Collection, S.M.A.R.T. |
| Reliability | MTBF 2.0 million hours; UBER below 1 unrecoverable error per 10^17 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating −40 °C to 85 °C; humidity 5% to 95%, non-condensing |
| Shock and vibration | 1,500 G at 0.5 ms non-operating, 3 axes; 20 G sine sweep, 20–2,000 Hz |
| Status | In production — the PM893a is Samsung’s current mainstream SATA data-centre line |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7L33T8HELA | Model code | New / used | Enquire |
| MZ7L33T8HELA-00A07 | Ordering code | New / used | Enquire |
| MZ7L33T8HELA-00B07 | Ordering code | New / used | Enquire |
The three strings describe the same drive. MZ7L33T8HELA is the model name, with the 3T8 block recording the 3.84 TB capacity and the trailing HELA block tied to this capacity's build — the 1.92 TB member shares HELA, while the 960 GB carries ELT and the 480 GB EJD. -00A07 and -00B07 identify firmware and customer variant, not capacity or endurance grade. Both appear on PM893a parts in circulation, so tell us which one the platform expects and we will match it.
At 1.0 drive-writes-per-day for five years it is 3.84 TB of writes every day — 1,400 TB a year, seven petabytes across the warranty. For a repository, an image store or a staging volume that is refreshed on a schedule, that is far more headroom than the workload will consume. For a journal or a write cache it still is not the right drive, because the grade is what limits those workloads, not the capacity.
Written flat out at 530 MB/s the rating would last about 153 days, which is the useful way to read a TBW figure: it is a warranty quantity, not a prediction. The number that decides a tier at this capacity is the two-hour rebuild, not the seven petabytes.
Fits: read-mostly data tiers, image and firmware repositories, backup staging written once and read many times, VM datastores where the working set is larger than a mirror pair of 1.92 TB, and array builds where bay count is the binding constraint. It is also the natural spare for a fleet of 960 GB and 1.92 TB PM893a drives, because firmware and security behaviour are identical across the family.
Does not fit: journal volumes, write caches, or anything written at line rate all day. The mixed-use SM883 at 3.84 TB carries 21,024 TBW at 3.0 drive-writes-per-day — three times the daily allowance and the endurance grade this drive does not have — for 20 MB/s less sequential read and a slightly higher write power draw.
Two things it does not have. No published hold-up time for the power-loss circuit: the safeguards are documented, the milliseconds are not, so it covers a brief interruption rather than guaranteeing a flush window. And no dual-porting — a single-port 6 Gb/s SATA drive, which is what internal bays expect and what shared storage does not.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM893a 480 GB | 480 GB | 560 / 360 MB/s | 97K / 17K IOPS | 876 TB (1.0 DWPD) | Read-intensive |
| PM893a 960 GB | 960 GB | 560 / 530 MB/s | 97K / 31K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive |
| PM893a 1.92 TB | 1.92 TB | 560 / 530 MB/s | 97K / 31K IOPS | 3,504 TB (1.0 DWPD) | Read-intensive |
| PM893a 3.84 TB | 3.84 TB | 560 / 530 MB/s | 97K / 31K IOPS | 7,008 TB (1.0 DWPD) | Read-intensive |
| PM893a 7.68 TB | 7.68 TB | 560 / 530 MB/s | 97K / 31K IOPS | 14,016 TB (1.0 DWPD) | Read-intensive |
| PM893 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 30K IOPS | 7,008 TB (1.0 DWPD) | Read-intensive |
| PM883 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 28K IOPS | 5,466 TB (0.78 DWPD) | Read-intensive |
| SM883 3.84 TB | 3.84 TB | 540 / 520 MB/s | 97K / 29K IOPS | 21,024 TB (3.0 DWPD) | Mixed-use |
Three things are worth reading off that table. The PM893a rows are flat from 960 GB up — identical sequential, identical random, identical latency — so the family above that point is a capacity ladder and nothing else. The plain PM893 at this capacity carries the same 7,008 TBW, which means the revision changed the warranty statement rather than the endurance. And the mixed-use SM883 triples the endurance for 20 MB/s of sequential read, which is the only row here that changes the class of the drive rather than its size.
Against the PM883 it replaces, this drive adds 10 MB/s on both sequential figures, 3K of random write and 1,542 TB of endurance. Every step from PM883 to PM893a adds 28%, so the absolute gain grows with capacity: 1,542 TB here, 3,084 TB at the 7.68 TB member.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from. Send the quantity, the condition you need, the ordering suffix the platform expects and the server model the drives are going into, and you will get a quote with lead time the same working day. Array builds are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV