Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ-7L33T800 · Samsung

Samsung PM893 3.84TB SATA SSD (MZ-7L33T800)

3.84 TB 2.5-inch SATA enterprise SSD, ordering codes -00A07 / -00W07 / -00B7C

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ-7L33T800
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 3.84 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1
TBW 7,008 TB
Sequential Read 550 MB/s
Sequential Write 520 MB/s
Random Read IOPS 98K IOPS
Random Write IOPS 30K IOPS
Power 3.2 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption Opal 2.0
Condition New · Used

Frequently Asked Questions

No. Both run at 550/520 MB/s and 98K/30K IOPS, and so does 7.68 TB. What changes with capacity is endurance and density: 3,504 TBW at 1.92 TB, 7,008 TBW here, 14,016 TBW at 7.68 TB. Choose between them on bay count and pool target, not on speed.

The middle block changes with capacity: MZ7L3240HCHQ and MZ7L3480HCHQ at 240 and 480 GB, MZ7L3960HCJR at 960 GB, MZ7L31T9HBLT and MZ7L33T8HBLT at 1.92 and 3.84 TB, and MZ7L37T6HBLA at 7.68 TB. Copy the full string from your paperwork; editing a neighbouring code is the usual cause of a PO mismatch.

Whichever one your paperwork carries. All four identify the same 3.84 TB drive at the same published figures. MZ-7L33T800 is the catalogue code we quote under, -00W07 is the part number printed in Samsung’s datasheet and the default for a new build, and the other two cover existing BOMs and asset registers.

SATA. It is a 2.5-inch, 7 mm drive on SATA 6 Gb/s, backward compatible with 3 Gb/s and 1.5 Gb/s, so it fits the 2.5-inch bays and SAS backplanes already in the chassis. There is no NVMe or U.2 version of this family.

Samsung rates the drive at 3.84 TB decimal, which operating systems display as roughly 3.49 TiB in binary units. That is a unit conversion rather than missing capacity; a small additional portion is reserved for over-provisioning and firmware.

Any 2.5-inch 7 mm hot-swap bay on a SATA controller, or a SAS backplane whose expander accepts SATA targets - Dell PowerEdge R760/R760xd2/R860 front cages, HPE ProLiant DL380/DL385 Gen10 Plus 2.5-inch cages, Lenovo SR650 V2/SR665/SR860, and Supermicro 2U twelve- or twenty-four-bay chassis. Each drive ships with a S.M.A.R.T. snapshot after full-surface read verification and a 4 KB QD32 run.

Samsung PM893 3.84 TB in the 2.5-inch 7 mm SATA form factor, catalogued under MZ-7L33T800 and supplied under the three ordering codes that carry the same build: MZ7L33T8HBLT-00A07, MZ7L33T8HBLT-00W07 and MZ7L33T8HBLT-00B7C. 550 MB/s sequential read, 520 MB/s sequential write, 7,008 TBW, power-loss protection. Supplied new or as tested pulls, with a 1-year warranty from us.

3.84 TB is a density decision more than a performance one. The drive runs at the same 550/520 MB/s and 98K/30K IOPS as 960 GB and 1.92 TB; what doubles again is endurance, to 7,008 TBW, and the raw capacity a chassis can hold: twelve of these in a 2U give 46 TB raw against 23 TB at 1.92 TB.

That is the capacity to buy when the pool is fixed by bay count rather than by budget. It is the same number of slots, half the drive count, half the cabling and half the failure domains of an equivalent 1.92 TB set — and at 1 DWPD it still carries a read-mostly tier for its whole service life without coming close to the wear limit.

Everything else is the standard SATA feature set: hot-swap 7 mm bays, 6 Gb/s falling back to 3 Gb/s and 1.5 Gb/s, SAS backplanes whose expander accepts SATA targets, PLP capacitors, AES 256-bit full-disk encryption with TCG Opal 2.0 and IEEE 1667, TRIM, garbage collection and S.M.A.R.T. Active power averages 2.2 W reading and 3.2 W writing with 1.5 W idle, so a twelve-drive bay adds roughly 38 W to the node.

Where 3.84 TB sits: density instead of drive count

At 1 DWPD the arithmetic is 7,008 ÷ (3.84 × 365 × 5) = 1.0, which is the same rating as every other capacity in the family, but the absolute number is now large enough that a read-mostly tier will not approach it in five years of normal service. The reason to choose this capacity is not endurance headroom; it is that the chassis fills up before the budget does.

Twelve bays is the common 2U layout. In 960 GB drives that is 11.5 TB raw, in 1.92 TB it is 23 TB, and here it is 46 TB — with the same power envelope per bay, the same 7 mm clearance and the same backplane. When a refresh is driven by bay count rather than by controller, this is the step that avoids buying a second shelf. The Samsung PM893 1.92 TB is the right buy when the pool target is genuinely half of this.

Endurance at 3.84 TB, and where the rating still bites

The rating is 1 DWPD, and capacity does not change what that means. A virtualisation datastore, a boot-from-image tier, a backup landing zone or a read-mostly file pool sits comfortably inside it; a write cache, a journal or a database committing continuously does not, no matter how many terabytes the drive has. A tier that writes a full drive every day for five years is a 3 DWPD tier at any capacity.

For those workloads the PM897 is the same 2.5-inch SATA footprint at 3 DWPD, and mixing the two in one chassis is normal practice: PM897 where the writes land, PM893 everywhere else.

Technical specifications

Product familySamsung PM893 (V-NAND SSD, data center / server)
PNMZ-7L33T800 (catalogue code)
Ordering codesMZ7L33T8HBLT-00W07, MZ7L33T8HBLT-00A07, MZ7L33T8HBLT-00B7C
Capacity3.84 TB (3,840 GB decimal)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm)
InterfaceSATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s
ControllerSamsung in-house controller, DRAM cache with LPDDR4
NANDSamsung V-NAND TLC
Sequential read / write550 MB/s / 520 MB/s
Random 4 KB (QD32)98K IOPS read / 30K IOPS write
Endurance7,008 TBW — 1 DWPD over a 5-year rating period
PowerIdle 1.5 W (DIPM off); active average 2.2 W read / 3.2 W write
Power-loss protectionYes, PLP capacitors
Data securityAES 256-bit full-disk encryption, TCG Opal 2.0, IEEE 1667
FeaturesTRIM, garbage collection, S.M.A.R.T.
ReliabilityMTBF 2.0 million hours; operating 0 °C to 70 °C; non-operating -40 °C to 85 °C; 5–95% RH non-condensing
Shock / vibration1,500 G at 0.5 ms non-operating; 20–2,000 Hz at 20 G non-operating

Ordering codes we can supply at 3.84 TB

CodeTypeConditionQuote
MZ-7L33T800Catalogue codeNew / usedEnquire
MZ7L33T8HBLT-00W07Standard codeNew / usedEnquire
MZ7L33T8HBLT-00A07Channel codeNew / usedEnquire
MZ7L33T8HBLT-00B7CChannel codeNew / usedEnquire

All four are the same 3.84 TB drive, stocked in both conditions. MZ-7L33T800 is what we catalogue and quote under; the three ordering codes are what a PO line, a BOM or a warranty claim is usually written against, with -00W07 the standard code. The middle block is HBLT at this capacity and at 1.92 TB, but it is HCJR at 960 GB, HCHQ at 480 and 240 GB and HBLA at 7.68 TB — copy the whole string rather than editing a neighbouring one.

How 3.84 TB compares with the rest of the PM893 family

ModelCapacitySequential read / writeRandom read / writeEnduranceActive power (read / write)
PM893 3.84 TB3.84 TB550 / 520 MB/s98K / 30K IOPS7,008 TBW (1 DWPD)2.2 / 3.2 W
PM893 240 GB240 GB550 / 380 MB/s98K / 15K IOPS438 TBW (1 DWPD)2.1 / 2.7 W
PM893 480 GB480 GB550 / 520 MB/s98K / 29K IOPS876 TBW (1 DWPD)2.1 / 3.2 W
PM893 960 GB960 GB550 / 520 MB/s98K / 30K IOPS1,752 TBW (1 DWPD)2.2 / 3.2 W
PM893 1.92 TB1.92 TB550 / 520 MB/s98K / 30K IOPS3,504 TBW (1 DWPD)2.2 / 3.2 W
PM893 7.68 TB7.68 TB550 / 520 MB/s98K / 30K IOPS14,016 TBW (1 DWPD)2.2 / 3.2 W

Samsung PM893 7.68 TB doubles everything again, to 14,016 TBW and 92 TB raw in the same twelve bays, at the same speed and the same 2.2/3.2 W. Where the pool target is above this one, that is the capacity that avoids the second shelf entirely.

1.92 TB is the honest alternative when the target is half of this: same speed, same rating, half the endurance in absolute terms, two drives instead of one per slot pair. The choice between them is bay count against unit price, not performance.

PM897 shares the footprint at 3 DWPD against 1 DWPD, and it is the correct part only where the write rate demands it. At 7,008 TBW the read-mostly tier this drive is built for is already covered.

Chassis and backplanes that take it

Any 2.5-inch 7 mm hot-swap bay on a SATA controller accepts it, and SAS backplanes work where the expander accepts SATA targets. This capacity is usually bought as a full cage rather than as a pair:

If the node only needs a system disk, the smaller capacities do that job for less. This one exists because a chassis has a fixed number of bays and a pool has a fixed capacity target, and the cheapest way to close the gap is usually fewer, larger drives.

How each drive is tested before it ships

Warranty, lead time and volume quotes

Every drive carries a 1-year warranty against defects in workmanship and function; verified faulty units are replaced or refunded and we cover return shipping. New and used stock are held separately, the condition you order is confirmed before dispatch, and used units are tested pulls rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days; tracking is issued at dispatch.

Pricing is quoted per order because condition and quantity both move it, and a cage-sized order is priced as a set rather than as single drives. Send the quantity, the condition, the chassis model and the ordering code as it appears on your paperwork; for a pool build we quote a matched set from one batch so the drives in a shelf share firmware generation.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View