Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ7LH3T8HMLT · Samsung

Samsung PM883 3.84TB SATA SSD (MZ7LH3T8HMLT)

3.84 TB 2.5-inch SATA read-intensive SSD, ordering code MZ7LH3T8HMLT-00005

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ7LH3T8HMLT
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 3.84 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 0.78
TBW 5,466 TB
Sequential Read 550 MB/s
Sequential Write 520 MB/s
Random Read IOPS 98K IOPS
Random Write IOPS 28K IOPS
Power 2.3 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption SED
Condition New · Used

Frequently Asked Questions

The catalogue code is MZ7LH3T8HMLT and the ordering code is MZ7LH3T8HMLT-00005. The trailing -00005 is the General SED customer code, a security and packing designation rather than a capacity variant, so both strings describe the same 3.84 TB 2.5-inch 7 mm SATA drive with 5,466 TBW. The L marks the 3-bit V-NAND line-up, M the first-generation flash and LT the 4 Tb NAND package.

On random write only: 28K IOPS against 25K at 960 GB and 1.92 TB, and 24K at 480 GB. Sequential read and write are identical at 550/520 MB/s across the range, and consistency is 99/90 everywhere. This is the only capacity above 960 GB that changes any performance figure, and the change is small.

Because endurance is intensity multiplied by capacity. At 3.84 TB this drive writes 0.78 drive-writes-per-day, which is 5,466 TB; the 960 GB mixed-use SM883 writes 3.0 per day over 960 GB, which is 5,256 TB. Four times the capacity at a quarter of the intensity lands slightly higher, and the read-intensive part does it at 2.3 W on read instead of 2.8 W.

Both describe 5,466 TBW. Samsung rates the PM883 at 1.3 drive-writes-per-day over a three-year basis; spread the same 5,466 TB over five years and it is 0.78 DWPD, which is how we quote every drive so the catalogue is comparable. The absolute endurance does not change.

Power loss: yes, with a caveat. Capacitor hold-up flushes the DRAM write cache to NAND and the drive returns to a ready state within ten seconds, which Samsung documents in its SPOR chapter, but no hold-up time is published, so it covers a brief interruption rather than guaranteeing a flush window. TCG Opal: no claim for this part. The -00005 code is a General SED device with an AES 256-bit engine.

On specification the PM893 wins: the same 550/520 MB/s, 30K random write instead of 28K, 7,008 TBW instead of 5,466, plus TCG Opal 2.0 and a published PLP specification. The PM883 is worth buying when the budget is fixed, the platform is already qualified around it, or a matched batch of pull-tested spares for an existing tier is what the deployment needs.

Samsung PM883 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MZ7LH3T8HMLT, ordering code MZ7LH3T8HMLT-00005. 550 MB/s sequential read, 520 MB/s sequential write, 98K random read and 28K random write IOPS, 5,466 TBW on 3-bit V-NAND behind a Samsung Maru controller. Stocked new or as tested pulls with a 1-year warranty from us.

This capacity is the only member of the range that improves the random-write figure — the 7.68 TB drive that Samsung documents separately sits 1K below it. Random write moves from 25K IOPS to 28K here — the only performance figure that changes between 960 GB and the end of the range — and everything else is scale: 3.84 TB of room, 5,466 TB of write budget, and the same 550/520 MB/s and 99/90 consistency as every drive below it.

That combination produces the range's most useful arithmetic. 5,466 TBW is more absolute write budget than the 960 GB mixed-use SM883 carries at 5,256 TB — so this read-intensive drive outlasts a mixed-use drive four times smaller while offering four times the room, and it does it at 2.3 W on read instead of 2.8 W. The class rating decides intensity; the capacity decides the total. At 3.84 TB the total wins.

The rest of the package is the generation's: 3-bit V-NAND with read-intensive over-provisioning, a Maru controller with a DRAM cache, a documented power-loss sequence where capacitor hold-up flushes the cache to NAND and the drive is ready within ten seconds, a 2-million-hour MTBF, and no TCG Opal. It is a legacy design — Samsung's current SATA data-centre line is the PM893.

What 3.84 TB at the top of this range brings to a tier

Density. 3.84 TB in a 7 mm 2.5-inch slot is the point of this drive: one bay holds what used to take four 960 GB drives, at 1.3 W idle instead of 5.2 W, and with one cable, one port and one firmware record instead of four. In a 1U chassis with ten bays that is the difference between a 9.6 TB tier and a 38 TB one, which is the argument that sells this capacity over its smaller siblings.

The write figures follow the capacity rather than the other way round. 5,466 TBW at 0.78 drive-writes-per-day is three terabytes of writes a day for five years — enough that a read-mostly volume will never approach it, and not enough to make this a write target. If the workload writes continuously, the mixed-use drive at this capacity carries 21,024 TB and is the correct part; if it writes in bursts and reads all day, the 5,466 TB here is more than the role needs.

What to plan around at this size is rebuild, not endurance. A failed 3.84 TB member of a mirror takes hours to rebuild on a SATA interface, and the surviving drive carries the full read load while it does. That is a property of the capacity, not of this model — but it is the reason large read tiers are usually built with more parity than pair-mirroring, and the reason a spare on the shelf matters more here than at 240 GB.

Technical specifications

Product familySamsung PM883 (V-NAND SSD, data centre / read-intensive)
PNMZ7LH3T8HMLT (catalogue code)
Ordering codeMZ7LH3T8HMLT-00005 (General SED)
Capacity3.84 TB (7,501,476,528 sectors of 512 bytes)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 6.80 mm, max 70 g)
InterfaceSATA 6 Gb/s, ATA/ATAPI-7 and Serial ATA 3.3
ControllerSamsung Maru (Samsung LSI), with DRAM write cache
NANDSamsung V-NAND, 3-bit (TLC), 4 Tb 2-CE packages; read-intensive over-provisioning
Sequential read / write550 MB/s / 520 MB/s (128 KB, QD32)
Random 4 KB (QD32)98K IOPS read / 28K IOPS write
IOPS consistency99% read / 90% write at 4 KB
Latency and QoS140 µs read / 40 µs write at QD1; 99.99th percentile 0.5 ms read, 0.3 ms write at QD1; 0.9 ms and 3.2 ms at QD32
Endurance5,466 TBW — 0.78 DWPD on a five-year basis; Samsung quotes 1.3 DWPD against a three-year basis, which is the same 5,466 TB
PowerActive read 2.3 W; active write 3.6 W; idle 1.3 W; supply 5 V ±5%
Power-loss protectionYes — capacitor hold-up flushes DRAM to NAND; ready state within 10 s (SPOR). No hold-up time published
Data securityAES 256-bit encryption engine (General SED part); no TCG Opal claim
FeaturesTRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data protection, RoHS
ReliabilityMTBF 2.0 million hours; UBER 1 sector per 1017 bits read; data retention 3 months at 40 °C after rated endurance
EnvironmentalOperating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing
Shock and vibration1,500 G at 0.5 ms half sine; 20 G sine sweep, 20–2,000 Hz
StatusLegacy generation — Samsung's current SATA data-centre line is the PM893; supply here is remaining stock and pull-tested units

Ordering codes we can supply at 3.84 TB

CodeTypeConditionQuote
MZ7LH3T8HMLTCatalogue codeNew / usedEnquire
MZ7LH3T8HMLT-00005Ordering codeNew / usedEnquire

The model name reads across from the smaller members with two fields that differ: MZ for memory, 7 for the 2.5-inch 7 mm SATA form factor, L for the V-NAND 3-bit line-up where the mixed-use SM883 carries K, H for the Maru controller, 3T8 for 3.84 TB, H for the BGA NAND package, M for first-generation flash (the 240 GB, 480 GB and 960 GB drives carry A for second-generation), LT for the 4 Tb 2-CE NAND density — the SATA 3.3 package code used at this capacity and at 1.92 TB — and -00005 for the General SED customer code. The suffix is a security and packing designation, not a capacity variant.

What 5,466 TBW means in a day

3.0 TB of writes every day for five years — 2,995 GB at 0.78 drive-writes-per-day, double the 1.92 TB member. Written flat out at 520 MB/s the rating would be gone in about 122 days, so the number is large but not unbounded: it is enough for any read-mostly role by a wide margin and not enough to make this drive a write target.

Samsung rates the PM883 against a three-year basis, so the rating works out at 1.3 drive-writes-per-day; spread the same 5,466 TB over five years and it is 0.78, which is how we quote every drive so the figures compare. The arithmetic is exact: 1.3 × 365 × 3 × 3,840 GB = 5,466 TB.

The ladder in this range runs 341 / 683 / 1,366 / 2,733 / 5,466 TB from 240 GB to here, doubling at each step at an unchanged 0.78 DWPD. The current-generation PM893 at 3.84 TB carries 7,008 TB at 1.0 DWPD — 28% more budget and 2K more random write, which is what the newer part adds at this capacity.

Where this drive fits, and what it does not have

The roles are large and read-dominated: a dense read tier behind a smaller flash or NVMe cache, an image or artefact library, a media and content store that is written on ingest and read continuously, a backup restore target written in a window and read for a month, an analytics workspace whose writes are bulk loads rather than updates. At 3.84 TB the capacity is the design decision, and the endurance is a consequence of it rather than a constraint.

Three limits, inherited from the generation. Power-loss protection is capacitor-based and documented but unquantified: the drive flushes its cache and returns to a ready state within ten seconds, but no hold-up time is published, so it does not replace a UPS on anything transactional. There is no TCG Opal 2.0 claim — the -00005 part is a General SED device with the AES 256-bit engine. And the generation is legacy: supply is remaining stock and pull-tested units, and at this capacity a spare on the shelf is worth planning for before a rebuild forces the question.

Where endurance matters more than density, the SM883 at 3.84 TB carries 21,024 TB at 3.0 drive-writes-per-day and writes 29K random IOPS instead of 28K. Where current-generation credentials matter, the PM893 carries Opal 2.0, a published PLP specification and 7,008 TBW. This drive is the right one when the tier is read-mostly, the density is the point, and the budget is fixed.

How 3.84 TB compares with the PM883 range and the drives either side of it

ModelCapacitySequential read / writeRandom 4K read / writeEnduranceClass
PM883 480 GB480 GB550 / 520 MB/s98K / 24K IOPS683 TB (0.78 DWPD)Read-intensive
PM883 1.92 TB1.92 TB550 / 520 MB/s98K / 25K IOPS2,733 TB (0.78 DWPD)Read-intensive
PM883 3.84 TB3.84 TB550 / 520 MB/s98K / 28K IOPS5,466 TB (0.78 DWPD)Read-intensive
PM883 7.68 TB7.68 TB550 / 520 MB/s98K / 27K IOPS10,932 TB (0.78 DWPD)Read-intensive
SM883 3.84 TB3.84 TB540 / 520 MB/s97K / 29K IOPS21,024 TB (3.0 DWPD)Mixed-use
PM863a 3.84 TB3.84 TB520 / 480 MB/s97K / 24K IOPS5,466 TB (0.78 DWPD)Read-intensive
PM893 3.84 TB3.84 TB550 / 520 MB/s98K / 30K IOPS7,008 TB (1.0 DWPD)Read-intensive

The four PM883 rows are the whole family at its top end: read is fixed at 550 MB/s, write at 520, and the only thing that moves between 480 GB and here is random write, from 24K to 28K, alongside a proportional doubling of capacity and write budget. This is the capacity to buy when the tier is sized in tens of terabytes.

Against the drive it replaces the gains are read-side only: 550/520 against 520/480 and 28K against 24K random write, at identical 5,466 TBW. Against the mixed-use twin sequential write is identical at 520 MB/s and the gap is 29K against 28K random write and 21,024 TB against 5,466 of endurance. Against the PM893 this drive gives up 2K of random write, 1,542 TB of endurance and Opal support, at the same sequential figures.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from — the PM883 is a legacy generation, so larger quantities are quoted against confirmed stock rather than a standing lead time. Send the quantity, the condition you need and the server model the drives are going into, and you will get a quote with lead time the same working day. Spares for an existing tier are matched from a single batch where stock allows, including firmware revision and wear level.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View