Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK3T8TCB · Micron

Micron 5100 PRO 3.84TB SATA SSD (MTFDDAK3T8TCB)

3.84 TB 2.5-inch SATA mixed-use SSD, ordering code MTFDDAK3T8TCB-1AR1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK3T8TCB
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 3.84 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 2.5
TBW 17,600 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 93K IOPS
Random Write IOPS 30K IOPS
Power 6 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK3T8TCB and the ordering code is MTFDDAK3T8TCB-1AR1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 3T8 is the capacity block for 3.84 TB, and TCB is the PRO tier block, which differs from the ECO and MAX blocks at the same capacity. The suffix after the hyphen is assigned per SKU.

Yes. The tier runs 240 GB, 480 GB, 960 GB, 1.92 TB and 3.84 TB, and 3.84 TB exists only in the 2.5-inch 7 mm case; the M.2 variant of the same family stops at 1.92 TB. This drive carries the largest write budget in the tier at 17,600 TBW, though not the highest random write, which peaks at 480 GB.

Random write peaks in the middle of the tier: 26K at 240 GB, 43K at 480 GB, 37K at 960 GB and 1.92 TB, and 30K here. As capacity grows, the overprovisioned area is spread across more die and the small-block advantage per byte falls. Sequential read and write do not move at all above 960 GB, and random read stays at 93K throughout.

17,600 TB over five years is 9,644 GB a day. A datastore writing 2 TB a day uses 21% of that and a backup staging volume writing 4 TB a day uses 41%, so the rating is generous for most mixed workloads at this size. The binding constraint at 3.84 TB is the rebuild window, about two hours for a full rewrite at 520 MB/s.

Both read at 540 MB/s, write at 520 MB/s, serve 93K random read and draw 6 W. The PRO carries 17,600 TBW against 6,400, which is 2.75 times the budget, and serves 30K random write against 18K. With speed and power identical, the whole difference between the tiers at this capacity is write endurance.

Both. A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops, and the drive is a TCG Enterprise 1.0 self-encrypting unit with AES 256-bit encryption. TCG Enterprise is not the same as consumer TCG Opal 2.0 and needs a controller or key-management stack that speaks it.

Micron 5100 PRO 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK3T8TCB, ordering code MTFDDAK3T8TCB-1AR1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 30K random write IOPS at 4 KB, 17,600 TBW — 2.5 drive writes a day for five years, the largest write budget in the tier — on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

This is the largest capacity the tier offers and the last one, and by volume it is the one that matters: 17,600 TBW is nine and a half terabytes of writes a day for five years, on a drive that streams at the same 520 MB/s as the two capacities below it. Capacity on this platform stops here: 3.84 TB exists only in the 2.5-inch case, while the M.2 variant of the same family tops out at 1.92 TB.

Why the biggest capacity is not the fastest on small blocks

Random write peaks in the middle of this tier, not at the top. The figures run 26K at 240 GB, 43K at 480 GB, 37K at 960 GB and 1.92 TB, and 30K here. That is the same curve the read-intensive tier shows, and it is a property of how the overprovisioned area is spread across die as capacity grows rather than a defect of the largest drive.

Sequential performance, by contrast, is flat from 960 GB upward: 540/520 MB/s at every capacity, because the interface is already the limit and more die cannot buy more than 6 Gb/s. Random read is flat across the whole tier at 93K. So the only performance figure that changes between 1.92 TB and this drive is the one that matters least on a volume that fills and is read back.

Where this capacity does lead is the budget. 17,600 TB at 2.5 drive writes a day is exactly twice the 1.92 TB member, on the same rating, which means the endurance and the bytes scale together across the upper half of the tier even though the small-block write does not.

Technical specifications

Product familyMicron 5100 PRO (SATA NAND Flash SSD, mixed-use data centre)
PNMTFDDAK3T8TCB (catalogue code)
Ordering codeMTFDDAK3T8TCB-1AR1ZABYY
Capacity3.84 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 3D enterprise TLC (eTLC), 32-layer
Sequential read / write540 MB/s / 520 MB/s (128 KB, steady state)
Random 4 KB (QD32)93K IOPS read / 30K IOPS write
Quality of service500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999%
Endurance17,600 TBW — 2.5 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
PowerTypical 6 W; supply 5 V at the connector
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise 1.0 SED
DRAM cacheYes, LPDDR3
FeaturesEnd-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

What 17,600 TBW means at 3.84 TB

17,600 TB over five years is 9,644 GB of writes every day, two and a half full fills of the drive. Written flat out at 520 MB/s the whole allowance would last about 392 days; the rating assumes that daily allowance spread across 1,825 days. Two of these in a mirror carry 17,600 TB in each half of a 3.84 TB volume, which is the practical reason to buy this capacity: not more speed, but a write budget that survives a rebuild, a restore and a bad week without moving the percentage-used counter.

Against the read-intensive drive at the same capacity the step is a factor of 2.75. The 5100 ECO at 3.84 TB carries 6,400 TBW at 0.9 drive writes a day and serves 18K random write, at the same 540/520 MB/s and the same 6 W. Everything the two drives share is identical, which makes this a clean comparison: the difference is 11,200 TB of budget and 12K of random write, and nothing else.

Against the mixed-use parts at this capacity the budget is mid-table rather than top. The PM897a at 3.84 TB carries 21,024 TBW at 3.0 drive writes a day, serves 60K random write and draws 2.3 W, so it is ahead on all three. This drive sits 16% below it on budget and level with it on nothing, which is the position the tier occupies: above the read-intensive group by a wide margin, below the top mixed-use group by a narrow one.

Ordering codes and the capacity block

CodeTypeConditionQuote
MTFDDAK3T8TCBCatalogue codeNew / usedEnquire
MTFDDAK3T8TCB-1AR1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 3T8 is the capacity block that stands for 3.84 TB, and the block after it identifies the tier and the interface. TCB is the PRO block; the ECO drive at this capacity carries a different block and so does the MAX. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU.

At goods-in 3T8 is the block to read, and it is the one most easily confused with 1T9 across a pallet of mixed capacities: same case, same label family, same 540/520 MB/s, same 6 W, same configuration suffix. The difference is 1.92 TB of capacity and 8,800 TB of write budget, and it does not announce itself on a shelf.

How it compares across the 3.84 TB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 PRO 3.84 TB3.84 TB540 / 520 MB/s93K / 30K IOPS17,600 TB (2.5 DWPD)6 WMixed-use, 3D eTLC
Micron 5100 PRO 1.92 TB1.92 TB540 / 520 MB/s93K / 37K IOPS8,800 TB (2.5 DWPD)5.5 WSame tier, half capacity
Micron 5100 ECO 3.84 TB3.84 TB540 / 520 MB/s93K / 18K IOPS6,400 TB (0.9 DWPD)6 WRead-intensive, 3D eTLC
Samsung PM897a 3.84 TB3.84 TB560 / 530 MB/s97K / 60K IOPS21,024 TB (3.0 DWPD)2.3 WMixed-use, TLC
Samsung SM883 3.84 TB3.84 TB540 / 520 MB/s97K / 29K IOPS21,024 TB (3.0 DWPD)2.8 WMixed-use, MLC
Samsung PM893a 3.84 TB3.84 TB560 / 530 MB/s97K / 31K IOPS7,008 TB (1.0 DWPD)2.2 WRead-intensive, TLC
Samsung PM883 3.84 TB3.84 TB550 / 520 MB/s98K / 28K IOPS5,466 TB (0.78 DWPD)2.3 WRead-intensive, TLC

Read straight across. This drive is third of seven on write budget at 17,600 TB and third on endurance class at 2.5, behind the two 21,024 TB rows at 3.0; fourth on random write at 30K, behind the PM897a at 60K, the 1.92 TB member at 37K and the PM893a at 31K; level with three other rows at 520 MB/s sequential write; fifth on random read at 93K, tied with the ECO and ahead of nothing else; and level with the ECO as the highest power figure on the page at 6 W.

The comparison that decides most purchases is the one between this drive and its own 1.92 TB member, because they are the same tier, the same rating and the same speed. Double the bytes and the budget for half a watt, and lose 7K of random write. A volume that ingests small blocks wants the smaller member; a volume that stores and re-reads large blocks wants this one, and the 7K difference never shows up in a queue it does not build.

Where this capacity ends the tier

The tier runs 240 GB, 480 GB, 960 GB, 1.92 TB and this capacity, and its shape is different at each size. 240 GB is die-limited and streams at 250 MB/s. 480 GB is the peak of the tier on random write at 43K. 960 GB is where the endurance class moves to 2.5 and streaming reaches 520 MB/s. 1.92 TB and this one carry that forward and only add bytes and budget.

Beyond this capacity there is nothing on the platform, which makes the choice at the top of a build simple. A build that needs more than 3.84 TB per bay moves to the read-intensive tier at 7.68 TB and accepts 0.6 drive writes a day, or it changes form factor. A build that needs this much mixed-use budget in a 7 mm SATA bay takes this drive, and the rebuild arithmetic is what it is: a full rewrite at 520 MB/s takes about two hours, and for those two hours a mirror is unprotected.

For that reason this capacity usually lands in a wide parity group, or in pairs where the rebuild is scheduled rather than triggered. It is the same argument the 1.92 TB member faces at half the size, and it is not a reason to avoid the capacity: it is a reason to plan the array around a two-hour window instead of a one-hour one.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 3.84 TB the difference between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View