1.92 TB 2.5-inch SATA mixed-use SSD, ordering code MTFDDAK1T9TCB-1AR1ZABYY
| Capacity | 1.92 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 2.5 |
| TBW | 8,800 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 93K IOPS |
| Random Write IOPS | 37K IOPS |
| Power | 5.5 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5100 PRO 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK1T9TCB, ordering code MTFDDAK1T9TCB-1AR1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 37K random write IOPS at 4 KB, 8,800 TBW — 2.5 drive writes a day for five years — on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
Nothing new happens at this capacity, and that is the point. Sequential read, sequential write, random read and random write are identical to the 960 GB member — 540/520 MB/s and 93K/37K — and the endurance class holds at 2.5 drive writes a day. What doubles is the bytes and the write budget behind them, from 4,400 to 8,800 TB, for half a watt more. This is the capacity to buy when the workload is already right and the volume simply needs to be twice as large.
The tier steps three times and this is the third step: 1.48 drive writes a day at 240 GB and 480 GB, 2.5 at 960 GB, and 2.5 again here. Because the class does not move, the write budget scales with the bytes rather than against them, and the performance columns stay flat. A 1.92 TB drive is a 960 GB drive with twice the die and twice the overprovisioned area, so the parallelism figure that set sequential write at 520 MB/s at 960 GB is already at the practical ceiling of a 6 Gb/s port and does not improve.
That makes the comparison with the smaller member short. Twice the capacity, twice the budget, the same 540/520 MB/s, the same 93K/37K, 0.5 W more on a typical workload. For a build that is sizing by bytes, this is the cheapest way to add capacity inside the tier; for a build that is sizing by rebuild window, it is the more expensive way, because a full rewrite takes twice as long.
The one figure that improves is the one nobody quotes: power per terabyte. At 5.5 W typical for 1.92 TB this drive runs at 2.9 W per terabyte, against 5.2 W per terabyte for the 960 GB member at 5 W. A 24-bay shelf of this capacity holds 46 TB at 132 W; the same shelf of 960 GB members holds 23 TB at 120 W.
| Product family | Micron 5100 PRO (SATA NAND Flash SSD, mixed-use data centre) |
|---|---|
| PN | MTFDDAK1T9TCB (catalogue code) |
| Ordering code | MTFDDAK1T9TCB-1AR1ZABYY |
| Capacity | 1.92 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 3D enterprise TLC (eTLC), 32-layer |
| Sequential read / write | 540 MB/s / 520 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 93K IOPS read / 37K IOPS write |
| Quality of service | 500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999% |
| Endurance | 8,800 TBW — 2.5 DWPD over five years |
| TBW basis | Drive held full under a random write workload over the five-year rating period |
| Power | Typical 5.5 W; supply 5 V at the connector |
| Power-loss protection | Yes — data-protection capacitor with capacitor monitoring reported by firmware |
| Data security | AES 256-bit encryption, TCG Enterprise 1.0 SED |
| DRAM cache | Yes, LPDDR3 |
| Features | End-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase |
| Reliability | MTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz |
8,800 TB over five years is 4,822 GB of writes every day, two and a half full fills of the drive. Written flat out at 520 MB/s the whole allowance would last about 196 days; the rating assumes that daily allowance spread across 1,825 days. A virtualisation datastore writing 1 TB a day uses 21% of the allowance, a log volume at 200 GB a day uses 4%, and a build that mirrors two of these for a 3.84 TB usable volume has 8,800 TB of budget in each half.
Against the read-intensive drive at the same capacity the step is the whole reason the tier exists. The 5100 ECO at 1.92 TB carries 3,200 TBW at 0.9 drive writes a day, 36% of this budget, and serves 24K random write against 37K. Sequential read, sequential write and power are identical, 540/520 MB/s at 5.5 W, so the difference is entirely in the write path.
Against the mixed-use parts at this capacity the budget is mid-table rather than top. The PM897a at 1.92 TB carries 10,512 TBW at 3.0 drive writes a day and serves 60K random write at 2.3 W, so it is ahead on both counts. This drive sits above the read-intensive group by a factor of 2.5 to 3.2 and below the top mixed-use group by about 16%, which is where the tier places it.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK1T9TCB | Catalogue code | New / used | Enquire |
| MTFDDAK1T9TCB-1AR1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 1T9 is the capacity block that stands for 1.92 TB, and the block after it identifies the tier and the interface. TCB is the PRO block; the ECO drive at this capacity carries a different block in that position and so does the MAX. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU.
1T9 is the block most often misread at goods-in, because the ECO and PRO drives at this capacity are the same case, the same 540/520 MB/s and the same 5.5 W, and differ only in the tier block, the endurance and the random-write figure. The gap is 3,200 TB against 8,800 TB. Read the block, not the capacity line, and check the endurance when a mixed pallet arrives.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5100 PRO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 93K / 37K IOPS | 8,800 TB (2.5 DWPD) | 5.5 W | Mixed-use, 3D eTLC |
| Micron 5100 PRO 960 GB | 960 GB | 540 / 520 MB/s | 93K / 37K IOPS | 4,400 TB (2.5 DWPD) | 5 W | Same tier, half capacity |
| Micron 5100 ECO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 93K / 24K IOPS | 3,200 TB (0.9 DWPD) | 5.5 W | Read-intensive, 3D eTLC |
| Samsung PM897a 1.92 TB | 1.92 TB | 560 / 530 MB/s | 97K / 60K IOPS | 10,512 TB (3.0 DWPD) | 2.3 W | Mixed-use, TLC |
| Samsung SM883 1.92 TB | 1.92 TB | 540 / 520 MB/s | 97K / 29K IOPS | 10,512 TB (3.0 DWPD) | 2.8 W | Mixed-use, MLC |
| Samsung PM893a 1.92 TB | 1.92 TB | 560 / 530 MB/s | 97K / 31K IOPS | 3,504 TB (1.0 DWPD) | 2.2 W | Read-intensive, TLC |
| Samsung PM883 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 25K IOPS | 2,733 TB (0.78 DWPD) | 2.3 W | Read-intensive, TLC |
Read straight across. This drive is third of seven on write budget at 8,800 TB and third on endurance class at 2.5, behind the two 10,512 TB rows at 3.0; third on random write at 37K, behind the PM897a at 60K, level with its own 960 GB member and ahead of every other row; level with four other rows at 520 MB/s sequential write; fifth on random read at 93K, tied with the ECO and ahead of nothing else; and level with the ECO as the highest power figure on the page at 5.5 W.
That last line is the honest cost of this tier. Against the Samsung mixed-use rows it gives up 1,700 TB of budget, 23K of random write and 3.2 W, and against the read-intensive rows it gains 2.5 to 3.2 times the endurance for the same power and the same streaming speed. Where a build already standardises on the 5100 platform, this is the mixed-use capacity in it; where it does not, the power figure is the number to weigh.
The tier runs 240 GB, 480 GB, 960 GB and this capacity, and the shape of it is three different drives rather than one drive at four sizes. At 240 GB the limit is die count, so sequential write is 250 MB/s and the drive is a boot device. At 480 GB the write path opens to 410 MB/s and random write to 43K, which is the peak of the tier on that figure. At 960 GB the endurance class moves to 2.5 and the streaming write reaches 520 MB/s, the ceiling of the interface.
Here nothing further changes, so the purchase is a straight capacity decision. A build that needs 1.92 TB usable in a mirror takes two of these; a build that needs the same usable space with a shorter rebuild window takes four 960 GB members and accepts twice the ports. The rebuild arithmetic is about an hour for a full rewrite at 520 MB/s, against 31 minutes for the smaller member, and that hour is the only figure in the decision that gets worse with capacity.
Above this capacity the tier continues at the same 2.5 rating and the same 520 MB/s, so a larger purchase buys bytes and budget in proportion and nothing else. Where the volume is read-mostly and the budget is not the constraint, the ECO at this capacity carries the same read speed at a third of the endurance, which is the cheaper way to buy bytes.
The 3.84 TB member is the top of that ladder at 17,600 TBW for another half watt, and it is the last capacity the platform offers: above it the mixed-use tier has nothing left in a 7 mm SATA bay.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 1.92 TB the spread between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV