Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK240TCB · Micron

Micron 5100 PRO 240GB SATA SSD (MTFDDAK240TCB)

240 GB 2.5-inch SATA mixed-use SSD, ordering code MTFDDAK240TCB-1AR1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK240TCB
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 240 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1.48
TBW 650 TB
Sequential Read 540 MB/s
Sequential Write 250 MB/s
Random Read IOPS 78K IOPS
Random Write IOPS 26K IOPS
Power 4.5 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK240TCB and the ordering code is MTFDDAK240TCB-1AR1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 240 is the capacity, and TCB is the tier block that separates PRO from ECO and MAX at the same capacity. The suffix after the hyphen is assigned per SKU.

Sequential throughput depends on how many NAND die the controller can drive at once, and 240 GB is the capacity with the fewest. Across seven 240 GB drives the write side ranges from 250 to 480 MB/s on the same 6 Gb/s interface, so the spread is parallelism rather than an interface limit. The random-write figure, which is what this tier is bought for, is the highest of the seven at 26K.

650 TB over five years is 356 GB a day. A hypervisor boot partition typically writes under 10 GB a day and a busy database log 40 to 80 GB a day, which is 3% to 22% of the allowance, so the rating is not the constraint in either role. The constraint at 240 GB is capacity: logs grow, and a volume that fills is a worse problem than one that wears.

The M510DC carries 920 TBW at 2.1 drive writes a day against 650 TB at 1.48 here, and writes sequentially at 290 MB/s against 250. This drive reads faster at 540 MB/s against 420, serves more random reads at 78K against 63K, more random writes at 26K against 18K, and draws 4.5 W against 5 W. The older drive wins on endurance; this one wins on every response figure.

All three share one controller, firmware line and qualification, and differ in overprovisioning, which sets the write allowance. ECO is the read-intensive tier, rated 0.5 drive writes a day at 480 GB and 960 GB, 0.9 at 1.92 TB and 3.84 TB and 0.6 at 7.68 TB. PRO is the middle tier, this capacity rated 1.48. MAX is the top tier. The drives are physically identical, so the tier block on the label is what distinguishes them.

Both. A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops, and the drive is a TCG Enterprise 1.0 self-encrypting unit with AES 256-bit encryption. TCG Enterprise is not the same as consumer TCG Opal 2.0 and needs a controller or key-management stack that speaks it.

Micron 5100 PRO 240 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK240TCB, ordering code MTFDDAK240TCB-1AR1ZABYY. 540 MB/s sequential read, 250 MB/s sequential write, 78K random read and 26K random write IOPS at 4 KB, 650 TBW — 1.48 drive writes a day for five years — on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

This is the first capacity of the PRO tier and the smallest drive in it, and it is built for the job a 240 GB enterprise drive actually does: operating systems, hypervisor partitions, journals and metadata. On those jobs the figure that matters is the small-block write queue, and at 26K this drive has the highest random write of any 240 GB part we list. The figure it gives up is streaming write, at 250 MB/s the slowest in that group — a deliberate trade at this capacity rather than a limitation of the platform, and the reason this page is about matching the drive to the tier rather than to the byte count.

Why 240 GB streams slowly and writes small blocks fastest

Sequential throughput on a SATA drive is set by how many NAND die the controller can keep busy at once, and 240 GB is the capacity with the fewest of them. That is why the write side of this table runs 250, 290, 300, 320, 380, 450 and 480 MB/s across seven drives of the same capacity: the spread is a parallelism effect, not an interface limit, and the interface here is the same 6 Gb/s as every other row.

The random-write column runs the other way. At 26K this drive sits above the SM883 at 22K, the M510DC at 18K, the PM893 at 15K, the PM883 at 14K and both remaining MLC parts at 10K and 9K. Small-block writes are absorbed by the write planes behind the overprovisioned area, and PRO carries more of that than the read-intensive tiers do, so the same die count that limits streaming helps here.

Random read lands at 78K, above only the M510DC at 63K and below the five Samsung rows at 86K to 98K. On a boot or metadata volume that is not the binding figure, because the working set is small and stays resident in the controller's DRAM and the host page cache; it binds on a tier that serves uncached lookups, which is not what a 240 GB drive is bought for.

Technical specifications

Product familyMicron 5100 PRO (SATA NAND Flash SSD, mixed-use data centre)
PNMTFDDAK240TCB (catalogue code)
Ordering codeMTFDDAK240TCB-1AR1ZABYY
Capacity240 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 3D enterprise TLC (eTLC), 32-layer
Sequential read / write540 MB/s / 250 MB/s (128 KB, steady state)
Random 4 KB (QD32)78K IOPS read / 26K IOPS write
Mixed 70/30 4 KB43K IOPS
Quality of service500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999%
Endurance650 TBW — 1.48 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
PowerTypical 4.5 W; supply 5 V at the connector
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise 1.0 SED
DRAM cacheYes, LPDDR3
FeaturesEnd-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

What 650 TBW means on 240 GB

650 TB over five years is 356 GB of writes every day, one and a half full fills of the drive per day. Written flat out at 250 MB/s the whole allowance would last about 30 days; the rating assumes that daily allowance spread across 1,825 days. Put the other way, a database journal that writes 40 GB a day uses 11% of the allowance, which is why a 240 GB PRO drive in a log role will outlive its server rather than the other way round.

The budget is fourth of seven at this capacity. The two mixed-use MLC parts carry 1,540 TB and 1,314 TB, the MLC drive from the older Micron platform carries 920 TB, and the three read-intensive TLC parts carry 438, 341 and 341 TB. Against the read-intensive group this drive is worth between 1.5 and 1.9 of them, and against the mixed-use MLC parts it is worth about 40% to 50% of theirs — the difference between a tier that writes a third of its capacity daily and one that writes it once a day.

Power is the one column where this drive does not lead. At 4.5 W typical it sits second highest of the seven, below only the MLC drive at 5 W, and well above the 2.3 to 3.0 W of the five Samsung rows. In a 24-bay chassis that is 108 W against 66 W, a gap worth knowing before a dense build is specified: the endurance is bought partly in watts.

Ordering codes and the tier block

CodeTypeConditionQuote
MTFDDAK240TCBCatalogue codeNew / usedEnquire
MTFDDAK240TCB-1AR1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 240 is the capacity, and the block after it identifies the tier and the interface. The three tiers of this platform — ECO, PRO and MAX — each carry their own block in that position, so TCB is the part of the string that separates this drive from an ECO of the same capacity. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU.

At goods-in the tier block is the field that matters, because all three tiers look identical: same blue label family, same 7 mm case, same 540 MB/s read, same capacity line. An ECO drive mislabelled as PRO carries a fifth of the write allowance in some capacities, and nothing on the outside of the drive announces it. Read the block, not the capacity.

How it compares across the 240 GB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 PRO 240 GB240 GB540 / 250 MB/s78K / 26K IOPS650 TB (1.48 DWPD)4.5 WMixed-use, 3D eTLC
Micron M510DC 240 GB240 GB420 / 290 MB/s63K / 18K IOPS920 TB (2.1 DWPD)5 WMixed-use, 16nm MLC
Samsung SM863a 240 GB240 GB410 / 450 MB/s90K / 10K IOPS1,540 TB (3.5 DWPD)2.5 WMixed-use, MLC
Samsung SM883 240 GB240 GB540 / 480 MB/s97K / 22K IOPS1,314 TB (3.0 DWPD)2.8 WMixed-use, MLC
Samsung PM893 240 GB240 GB550 / 380 MB/s98K / 15K IOPS438 TB (1.0 DWPD)2.7 WRead-intensive, TLC
Samsung PM883 240 GB240 GB550 / 320 MB/s98K / 14K IOPS341 TB (0.78 DWPD)2.3 WRead-intensive, TLC
Samsung PM863a 240 GB240 GB330 / 300 MB/s86K / 9K IOPS341 TB (0.78 DWPD)3 WRead-intensive, TLC

Read straight across. This drive is first of seven on random write at 26K, first on random read of nothing — second from the bottom, above only the M510DC — last on sequential write at 250 MB/s, fourth on write budget at 650 TB, fourth on endurance class at 1.48, and second highest on power at 4.5 W. Sequential read at 540 MB/s is level with the SM883 and 10 MB/s behind the two Samsung TLC parts at 550.

The choice between this drive and the mixed-use MLC rows turns on which write figure the workload uses. A queue of small random writes, which is what a journal, a metadata volume or a container image store produces, favours this drive at 26K against 10K to 22K. A stream of large sequential writes, which is what a backup target or a media scratch volume produces, favours them at 450 to 480 MB/s against 250. Both are mixed-use drives; they are not the same mixed-use drive.

Where PRO sits between ECO and MAX

All three tiers share one controller, one firmware line and one qualification, and differ in overprovisioning and therefore in the write allowance. ECO is the read-intensive tier, and at the capacities we list it is rated 0.5 drive writes a day at 480 GB and 960 GB, 0.9 at 1.92 TB and 3.84 TB and 0.6 at 7.68 TB — the 480 GB ECO carries 450 TBW, 69% of this drive's budget on twice the capacity. PRO is the middle tier, this capacity rated 1.48 drive writes a day. MAX is the top tier and is the one to price when the write allowance is the requirement rather than one of the constraints.

That top tier is now on the site at this capacity: the 5100 MAX 240 GB carries 2,200 TBW at 5.0 drive writes a day and serves 48K random write, against 650 TB and 26K here, at the same 4.5 W and the same 540 MB/s read — 3.4 times the write budget for the price of the tier.

That structure is what makes the tier the first decision and the capacity the second. A build that picks a 240 GB drive for a boot pair and then discovers it needed a journal volume has bought the wrong tier twice; a build that picks PRO at 240 GB for the pair and ECO at 480 GB for the read cache has bought each role its own answer. The two drives are the same width, the same connector and the same firmware family, so the tier can be changed late without touching the platform.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 240 GB the difference between a low-hour pull and a high-hour one matters more than at any other size in the range. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View