3.84 TB 2.5-inch SATA mixed-use SSD, ordering codes MZ7L33T8HENA-00A07 / -00B07
| Capacity | 3.84 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 3 |
| TBW | 21,024 TB |
| Sequential Read | 560 MB/s |
| Sequential Write | 530 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 60K IOPS |
| Power | 2.3 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM897a 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MZ7L33T8HENA, ordering codes MZ7L33T8HENA-00A07 and MZ7L33T8HENA-00B07. 560 MB/s sequential read, 530 MB/s sequential write, 97K random read and 60K random write IOPS at 4 KB, 21,024 TBW — 3.0 drive-writes-per-day over five years — on Samsung 3-bit TLC V-NAND, with TCG Opal 2.0 and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
This is the top of the a-build, and it is the capacity where a shared build code costs the most. HENA covers this drive and the 1.92 TB member; the two model numbers differ only in the capacity block, 3T8 here against 1T9 there, so a receiving check that stops at the build code will accept a drive carrying half the bytes the purchase order asked for. The ordering suffix does not separate them — both take -00A07 or -00B07 — which leaves the capacity line on the label as the only field that settles it. That is what this page is arranged around.
Both builds of this drive stop at 3.84 TB. Above it the Samsung SATA catalogue continues to 7.68 TB, but only as read-intensive parts: the 7.68 TB PM893a is rated 1.0 DWPD and the 7.68 TB PM883 0.78, against 3.0 here. A deployment that needs 7.68 TB per device at this endurance has to leave SATA for SAS or NVMe, and that is a platform decision rather than a drive decision.
The four capacities of the range share one specification table: 560/530 MB/s, 97K/60K IOPS, 95/90 consistency, 105/30 µs, 2.3/3.0 W. So the step from the 1.92 TB member to this one changes exactly two numbers — bytes and write budget, both doubled, 10,512 TB to 21,024 TB — and nothing inside the drive at all. Everything that does change at this point is arithmetic around the device: how many fit a chassis, what they add to idle draw, how long a rebuild runs, and whether one drive is an acceptable failure domain.
The density arithmetic is the reason the capacity exists. Twelve of these fill a 2U chassis with 46 TB of mixed-use storage and 16.8 W of idle draw; the same 46 TB built from 1.92 TB members needs twenty-four devices, twice the ports, twice the cables and twice the firmware records to keep in step. What it also has is twenty-four separate failure domains instead of twelve, and a rebuild that finishes in an hour instead of two.
| Product family | Samsung PM897a (V-NAND SSD, data centre / mixed-use) |
|---|---|
| PN | MZ7L33T8HENA (catalogue code) |
| Ordering code | MZ7L33T8HENA-00A07 / MZ7L33T8HENA-00B07 |
| Capacity | 3.84 TB (512-byte sectors, decimal capacity) |
| Form factor | 2.5-inch, 7.00 mm (100.20 × 69.85 × 7.00 mm, max 70 g) |
| Interface | SATA 6 Gb/s, Serial ATA 3.3, ATA/ATAPI ACS-4 |
| NAND | Samsung V-NAND, 3-bit (TLC) |
| Sequential read / write | 560 MB/s / 530 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 60K IOPS write |
| Random 8 KB (QD32) | 57K IOPS read / 40K IOPS write |
| IOPS consistency | 95% read / 90% write at 4 KB, sustained |
| Latency and QoS | 105 µs read / 30 µs write at QD1; 99.99th percentile 0.2 ms read, 0.05 ms write at QD1; 0.6 ms and 0.7 ms at QD32 |
| Endurance | 21,024 TBW — 3.0 DWPD over five years (TBW = DWPD × 365 × 5 × capacity) |
| Power | Active read 2.3 W; active write 3.0 W; idle 1.4 W (DIPM off); supply 5 V ±5% |
| Power-loss protection | Yes — capacitor hold-up transfers cached DRAM data to flash on failure; no hold-up time published |
| Data security | AES-XTS 256-bit encryption engine, TCG Opal 2.0 compliant |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data integrity, RoHS |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7L33T8HENA | Catalogue code | New / used | Enquire |
| MZ7L33T8HENA-00A07 | Ordering code | New / used | Enquire |
| MZ7L33T8HENA-00B07 | Ordering code | New / used | Enquire |
All three describe one 3.84 TB 2.5-inch 7 mm SATA drive with 21,024 TBW. The suffixes are customer and firmware identities rather than capacity or endurance grades, and both appear on parts in circulation. If a platform pins firmware to a code, name it on the PO; if not, either will do and we ship from the batch in hand.
One line of care on the suffix family: -00A07 and -00B07 also appear on the read-intensive PM893a, while -00B7C belongs to the earlier PM897 build. A PO written against the wrong suffix is a different line item even where the drive underneath performs identically.
Three fields on the label are enough. The model number carries 3T8 for this capacity and 1T9 for the 1.92 TB member, in the same position, followed by the same HENA. The capacity line printed above the part number states it in full, "3.84 TB" or "1.92 TB", and the ordering suffix sits on the same label — identical on both, so it cannot break the tie. Read the capacity block and the capacity line together and the ambiguity is gone.
Weight and height do not help. Both capacities are 7 mm 2.5-inch drives in the same case at the same 70 g maximum, and both draw the same power, so nothing physical separates them. A bay that mixes the two by accident will not fail to train; it will simply present 1.92 TB where 3.84 TB was expected, and the discrepancy surfaces at the array rather than at the bench. At this capacity that is 1.92 TB of missing space per mis-read drive, and a twelve-drive shelf can end up 23 TB short without a single error being logged.
The same care applies across the two builds. A PM897 3.84 TB carries HBNA and a -00B7C suffix where this drive carries HENA and -00A07 or -00B07. Those are interchangeable in performance terms and should still be kept apart in an asset register, because a firmware baseline pinned to one will not match the other.
21,024 TB over five years is 11.5 TB of writes every day. Written flat out at 530 MB/s the rating would last about 459 days, so the ceiling stops being a planning input and becomes a warranty term. The whole write load of a busy database node — data files, WAL, temporary tables, backups staged locally — is measured in hundreds of gigabytes a day, not in eleven terabytes.
What constrains a 3.84 TB deployment is the rebuild. A full rewrite at 530 MB/s takes about two hours, and for those two hours a mirrored pair is unprotected or a parity set runs without redundancy, with every surviving member carrying double the read load. That is why this capacity usually goes into a wider parity group or a distributed scheme rather than a pair, and it is a property of the capacity rather than of the drive.
Within the mixed-use group this drive is matched on endurance rather than ahead of it. The SM883 at 3.84 TB is also 3.0 DWPD and also carries 21,024 TBW, on 2-bit MLC, so the comparison reduces to 560/530 MB/s against 540/520 and 60K random write against 29K. The MLC part still leads on read latency, 85 µs against 105, and on IOPS consistency, 99/97 against 95/90, which is why it remains the better read-tier drive; on anything that queues writes the gap is not close.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM897a 3.84 TB | 3.84 TB | 560 / 530 MB/s | 97K / 60K IOPS | 21,024 TB (3.0 DWPD) | Mixed-use |
| PM897 3.84 TB | 3.84 TB | 560 / 530 MB/s | 97K / 60K IOPS | 21,024 TB (3.0 DWPD) | Mixed-use, earlier build |
| PM897a 1.92 TB | 1.92 TB | 560 / 530 MB/s | 97K / 60K IOPS | 10,512 TB (3.0 DWPD) | Same build code, half capacity |
| SM883 3.84 TB | 3.84 TB | 540 / 520 MB/s | 97K / 29K IOPS | 21,024 TB (3.0 DWPD) | Mixed-use, MLC |
| PM893a 3.84 TB | 3.84 TB | 560 / 530 MB/s | 97K / 31K IOPS | 7,008 TB (1.0 DWPD) | Read-intensive |
| PM883 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 28K IOPS | 5,466 TB (0.78 DWPD) | Read-intensive |
| PM863a 3.84 TB | 3.84 TB | 520 / 480 MB/s | 97K / 24K IOPS | 5,466 TB (0.78 DWPD) | Read-intensive |
The first two rows are one drive under two build codes, identical in every column, including the random-write figure — they are separate pages only because the model numbers differ. The third row is the other half of the HENA pair: same silicon, same published figures, half the capacity and half the budget, and the only row in this table that shares a build code with the drive above it.
The fourth row is the endurance match on MLC, and rows five to seven are the read-intensive group, where the budget falls to a third or less and random write falls with it — 31K, 28K and 24K against 60K. Those three are the right purchase for a volume filled once and read for five years; what none of them can do is absorb a daily rewrite for five years without reaching end of life early.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 3.84 TB the gap between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and — if it matters to your firmware baseline — which ordering code you need, and you will get a quote with lead time the same working day. Matched sets for mirroring or parity are selected from a single build and batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV