240 GB 2.5-inch SATA write-intensive SSD, ordering code MTFDDAK240TCC-1AR1ZABYY
| Capacity | 240 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 5 |
| TBW | 2,200 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 310 MB/s |
| Random Read IOPS | 93K IOPS |
| Random Write IOPS | 48K IOPS |
| Power | 4.5 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5100 MAX 240 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK240TCC, ordering code MTFDDAK240TCC-1AR1ZABYY. 540 MB/s sequential read, 310 MB/s sequential write, 93K random read and 48K random write IOPS at 4 KB, 2,200 TBW — five drive writes a day for five years — on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption, FIPS 140-2 validation and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
This is the write-intensive end of the 5100 platform, and at 240 GB it is the only drive we list that carries five drive writes a day: 2,200 TBW on a quarter of a terabyte, 3.4 times the PRO member at the same capacity and six and a half times the smallest read-intensive budget we list at this size. It does not buy that with power — it draws the same 4.5 W — and it does not buy it with read speed, which is identical at 540 MB/s. It buys it with NAND.
The three tiers share one controller, one firmware line and one 3D TLC die, and differ in how much NAND is placed behind the rated capacity. ECO runs light overprovisioning, PRO heavier, and MAX heavier again — in the same family a 960 GB MAX drive carries about 1,536 GiB of NAND behind roughly 894 GiB of usable space, which is close to twice the silicon for the rated bytes. That is what pays for five drive writes a day: spare area is what the controller writes into while the worn blocks are retired.
The performance signature follows the same design. Random write reaches 48K at this capacity, the highest in this table and 85% above the PRO member's 26K, because the write planes behind that spare area are what absorb small blocks. Sequential write is 310 MB/s, which is above the PRO member at 250 but below the larger drives in the range: a 240 GB capacity has few die, and overprovisioning cannot invent parallelism that is not there.
Sequential read and random read are unaffected by the tier — 540 MB/s and 93K, the same figures as the PRO drive at this capacity and the same as the mixed-use parts at every other capacity. So the choice between MAX and PRO at this size is not a read decision and not a power decision; it is entirely a write-endurance decision.
| Product family | Micron 5100 MAX (SATA NAND Flash SSD, write-intensive data centre) |
|---|---|
| PN | MTFDDAK240TCC (catalogue code) |
| Ordering code | MTFDDAK240TCC-1AR1ZABYY |
| Capacity | 240 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 3D enterprise TLC (eTLC), 32-layer |
| Sequential read / write | 540 MB/s / 310 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 93K IOPS read / 48K IOPS write |
| Mixed 70/30 4 KB | 57K IOPS |
| Quality of service | 500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999% |
| Endurance | 2,200 TBW — 5.0 DWPD over five years |
| TBW basis | Drive held full under a random write workload over the five-year rating period |
| Power | Typical 4.5 W; idle 2.5 W; supply 5 V at the connector |
| Power-loss protection | Yes — data-protection capacitor with capacitor monitoring reported by firmware |
| Data security | AES 256-bit encryption, TCG Enterprise 1.0 SED, FIPS 140-2 validated |
| DRAM cache | Yes, LPDDR3 |
| Features | End-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase |
| Reliability | MTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz |
2,200 TB over five years is 1,205 GB of writes every day, five full fills of the drive. Written flat out at 310 MB/s the whole allowance would last about 82 days; the rating assumes that daily allowance spread across 1,825 days. A log or journal volume writing 200 GB a day uses 17% of the allowance, and a write cache that turns over its full capacity four times a day uses 80% — the second case is exactly what this tier exists for, and the read-intensive parts would be at 400% of their rating in the same role.
Against the PRO member at this capacity the step is 3.4 times the budget for the same power and the same read speed, and against the MLC drive from the older Micron platform, the M510DC 240 GB at 920 TB and 2.1 drive writes a day, it is 2.4 times the budget with 540 MB/s read against 420 and 48K random write against 18K.
Against the mixed-use parts from the other platform at this capacity the picture is more even on budget and clearer on small blocks. The SM863a at 240 GB carries 1,540 TB at 3.5 drive writes a day and the SM883 at 240 GB carries 1,314 TB at 3.0, both below this drive on endurance and both far below it on random write at 10K and 22K. What they have is sequential write, at 450 and 480 MB/s against 310 here.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK240TCC | Catalogue code | New / used | Enquire |
| MTFDDAK240TCC-1AR1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 240 is the capacity, and the block after it identifies the tier and the interface. TCC is the MAX block, the third of the three this platform uses, and the only one of them that carries FIPS 140-2 validation alongside TCG Enterprise. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU.
At goods-in the tier block is the whole story at this capacity, because ECO, PRO and MAX in 240 GB share the case, the label family, the 540 MB/s read and the 4.5 W, and differ only in the block and the endurance behind it — 650 TB against 2,200 TB at the two extremes of a market that prices them differently. Read the TCC, not the capacity line, and check the endurance on any mixed pallet.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5100 MAX 240 GB | 240 GB | 540 / 310 MB/s | 93K / 48K IOPS | 2,200 TB (5.0 DWPD) | 4.5 W | Write-intensive, 3D eTLC |
| Micron 5100 PRO 240 GB | 240 GB | 540 / 250 MB/s | 78K / 26K IOPS | 650 TB (1.48 DWPD) | 4.5 W | Mixed-use, 3D eTLC |
| Micron M510DC 240 GB | 240 GB | 420 / 290 MB/s | 63K / 18K IOPS | 920 TB (2.1 DWPD) | 5 W | Mixed-use, 16nm MLC |
| Samsung SM863a 240 GB | 240 GB | 410 / 450 MB/s | 90K / 10K IOPS | 1,540 TB (3.5 DWPD) | 2.5 W | Mixed-use, MLC |
| Samsung SM883 240 GB | 240 GB | 540 / 480 MB/s | 97K / 22K IOPS | 1,314 TB (3.0 DWPD) | 2.8 W | Mixed-use, MLC |
| Samsung PM893 240 GB | 240 GB | 550 / 380 MB/s | 98K / 15K IOPS | 438 TB (1.0 DWPD) | 2.7 W | Read-intensive, TLC |
| Samsung PM883 240 GB | 240 GB | 550 / 320 MB/s | 98K / 14K IOPS | 341 TB (0.78 DWPD) | 2.3 W | Read-intensive, TLC |
Read straight across, and this drive leads where the tier is meant to lead. It is first of seven on write budget at 2,200 TB, first on endurance class at 5.0, and first on random write at 48K. It is fifth on sequential write at 310 MB/s, ahead only of the PRO member at 250 and the MLC drive at 290; fourth on random read at 93K; third on sequential read at 540, level with the SM883 and the PRO member and behind the two 550 MB/s rows; and level with the PRO member on power at 4.5 W, below only the MLC drive at 5 W.
That combination is unusual in this table and it is the reason to buy the drive. Every other row trades endurance against something: the mixed-use MLC parts have more sequential write but a third of the budget, the read-intensive parts have none of either. This one has the highest endurance and the highest small-block write, and gives up streaming write to get them, which is the correct trade for a journal, a write cache or a metadata volume and the wrong one for a backup target.
The three tiers of the 5100 platform run the same hardware at different overprovisioning. At 240 GB the ECO is not offered, so the choice is PRO at 1.48 drive writes a day or MAX at 5.0, and the gap between them is 650 TB against 2,200 TB with the same power and the same read figures. One step up the tier ladder the PRO 480 GB member reaches 43K random write at 1,300 TBW, still below this drive's 48K and 2,200 TB, so the MAX advantage is not something a larger PRO capacity closes.
What a larger capacity does give is streaming write. A 480 GB or 960 GB drive in any tier writes sequentially faster than 310 MB/s, because it has more die. So a build with a large sequential write component should not put this drive in that role even where its endurance would be welcome; a build with a small-block write component should not put a large-capacity read-intensive drive in that role even where its streaming speed would be welcome.
Where this drive is unambiguously the right answer is the volume whose writes are small, frequent and unavoidable: the journal of a database whose log is fsynced per transaction, the write cache in front of a slower tier, the metadata partition of a clustered file system, the boot and log pair of a hypervisor host that never stops writing. In those roles 2,200 TB behind 240 GB of address space is what keeps a drive inside its rating for five years.
One capacity up, the 480 GB MAX member is the strongest version of the same idea: 4,400 TBW at the same 5.0 rating, 74K random write instead of 48K and 460 MB/s sequential write instead of 310, at the same 4.5 W. Where the write cache is large enough that 240 GB of address space is the constraint rather than the endurance, that is the drive to take.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 240 GB the difference between a low-hour pull and a high-hour one matters more than at any other size: a MAX drive is bought precisely because it has been written to, so the percentage-used counter is the first thing to ask about. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV