480 GB 2.5-inch SATA read-intensive SSD, ordering code MZ7LH480HAHQ-00005
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 0.78 |
| TBW | 683 TB |
| Sequential Read | 550 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 98K IOPS |
| Random Write IOPS | 24K IOPS |
| Power | 2.3 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | SED |
| Condition | New · Used |
Samsung PM883 480 GB, 2.5-inch 7 mm SATA, catalogue code MZ7LH480HAHQ, ordering code MZ7LH480HAHQ-00005. 550 MB/s sequential read, 520 MB/s sequential write, 98K random read and 24K random write IOPS, 683 TBW on 3-bit V-NAND behind a Samsung Maru controller. Stocked new or as tested pulls with a 1-year warranty from us.
480 GB is where this read-intensive range stops being a slow writer. The 240 GB member manages only 320 MB/s of sequential write and 14K random write; this drive doubles the capacity and reaches the family figures of 520 MB/s and 24K, doubles the endurance to 683 TBW, and drops write latency from 70 µs to 40 µs. Everything that made the 240 GB part a specialist disappears at this capacity.
The comparison with the mixed-use drive of the same generation is the one that surprises people. At 480 GB the SM883 runs 540/520 MB/s and this drive runs 550/520 — identical sequential write, 10 MB/s faster read — and the real differences are random write (27K against 24K) and endurance (2,628 TB against 683). So the read-intensive discount at this capacity is not paid in throughput; it is paid in write endurance and in the tail.
Capacity buys parallelism, and parallelism is what a small drive lacks. At 240 GB there are not enough dies to keep a write stream busy, which is why that drive writes at 320 MB/s while every capacity above it writes at 520. The same shortage shows in random write, which jumps from 14K to 24K here and then climbs slowly to 28K at 3.84 TB, and in write latency, 70 µs against 40 µs.
It also shows in the tail, which is the number that decides whether a queue stays flat. At 240 GB the 99.99th-percentile read at queue depth 32 is 2 ms; from 480 GB upward it is 0.9 ms. That is a two-fold difference in the worst case on a drive whose headline IOPS are identical across the range — the kind of thing that only appears when the array is busy, and the reason the smallest capacity is the wrong one to build a shared tier on.
Consistency, by contrast, does not improve with capacity: Samsung publishes 99% read and 90% write for the whole range. That 90% write figure is three points below what the mixed-use drive manages and is the clearest single statement of what read-intensive means. It is fine for a boot volume or a read-mostly tier, and it is the reason this drive belongs nowhere near a journal, a write-back cache or a database log.
| Product family | Samsung PM883 (V-NAND SSD, data centre / read-intensive) |
|---|---|
| PN | MZ7LH480HAHQ (catalogue code) |
| Ordering code | MZ7LH480HAHQ-00005 (General SED) |
| Capacity | 480 GB (937,703,088 sectors of 512 bytes) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 6.80 mm, max 70 g) |
| Interface | SATA 6 Gb/s, ATA/ATAPI-7 and Serial ATA 3.3 |
| Controller | Samsung Maru (Samsung LSI), with DRAM write cache |
| NAND | Samsung V-NAND, 3-bit (TLC), read-intensive over-provisioning |
| Sequential read / write | 550 MB/s / 520 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 98K IOPS read / 24K IOPS write |
| IOPS consistency | 99% read / 90% write at 4 KB |
| Latency and QoS | 120 µs read / 40 µs write at QD1; 99.99th percentile 0.5 ms read, 0.3 ms write at QD1; 0.9 ms and 3.2 ms at QD32 |
| Endurance | 683 TBW — 0.78 DWPD on a five-year basis; Samsung quotes 1.3 DWPD against a three-year basis, which is the same 683 TB |
| Power | Active read 2.3 W; active write 2.9 W; idle 1.3 W; supply 5 V ±5% |
| Power-loss protection | Yes — capacitor hold-up flushes DRAM to NAND; ready state within 10 s (SPOR). No hold-up time published |
| Data security | AES 256-bit encryption engine (General SED part); no TCG Opal claim |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data protection, RoHS |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read; data retention 3 months at 40 °C after rated endurance |
| Environmental | Operating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing |
| Shock and vibration | 1,500 G at 0.5 ms half sine; 20 G sine sweep, 20–2,000 Hz |
| Status | Legacy generation — Samsung's current SATA data-centre line is the PM893; supply here is remaining stock and pull-tested units |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7LH480HAHQ | Catalogue code | New / used | Enquire |
| MZ7LH480HAHQ-00005 | Ordering code | New / used | Enquire |
The model name follows the generation's pattern, and one letter is worth reading: MZ for memory, 7 for the 2.5-inch 7 mm SATA form factor, L for the V-NAND 3-bit line-up where the mixed-use SM883 carries K, H for the Maru controller, 480 for capacity, H for the BGA NAND package, A for second-generation flash, HQ for the 1 Tb 4-CE NAND density, and -00005 for the General SED customer code. The last field is a security and packing designation, not a performance variant, and it is what a PO and a warranty claim are written against.
0.37 TB of writes every day for five years — 374 GB at 0.78 drive-writes-per-day. That is twice the 240 GB member's allowance and roughly what a boot volume, an application tier or an image repository will consume across an entire service life, with room to spare for patching and log rotation. It is also a quarter of what the mixed-use drive at this capacity allows, and that ratio is the purchase decision in one line.
Samsung states endurance against a three-year basis here, so the rating works out at 1.3 drive-writes-per-day while the same 683 TB spread over five years is 0.78. Both are correct; the absolute number is what a warranty is measured against, and the five-year figure is what compares with every other drive on this site. The arithmetic is exact either way: 1.3 × 365 × 3 × 480 GB = 683 TB, and 0.78 × 365 × 5 × 480 GB = the same.
For comparison inside the family: 341 / 683 / 1,366 / 2,733 / 5,466 TB from 240 GB to 3.84 TB, doubling at each step at an unchanged 0.78 DWPD. The current-generation PM893 at 480 GB carries 876 TB at 1.0 DWPD, which is the honest measure of how much the newer part buys.
The roles are read-dominated and large enough to matter: a hypervisor boot device or a mirrored pair, an operating-system volume for an appliance that is upgraded rather than written, an ISO and firmware repository, a read-mostly web or application tier, a backup restore target that is written in a window and read for a month, a container image store. At 480 GB the drive is no longer a compromise for those roles — the write behaviour is the family's full 520 MB/s, and the capacity is enough for an OS plus its application set with room to spare.
Three limits, all inherited from the generation. Power-loss protection is capacitor-based and documented but unquantified: the drive flushes its cache and returns to a ready state within ten seconds, but no hold-up time is published, so it does not replace a UPS on anything transactional. There is no TCG Opal 2.0 claim — the -00005 part is a General SED device with the AES 256-bit engine. And the generation is legacy: Samsung's current SATA data-centre line is the PM893, so supply is remaining stock and pull-tested units rather than a lead time.
Where endurance rather than read speed is the requirement, the SM863a at 480 GB from the previous generation carries 3,080 TBW at 3.5 drive-writes-per-day, and the SM883 at this capacity carries 2,628 TB at 3.0. Both carry far more write budget than this drive — the 863a writes at 485 MB/s and the SM883 at the same 520 as this drive, but they survive 3,080 TB and 2,628 TB of writing respectively, which is the trade a log volume or a cache tier needs. This drive is the right one when the data is written once and read for the rest of its life.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM883 240 GB | 240 GB | 550 / 320 MB/s | 98K / 14K IOPS | 341 TB (0.78 DWPD) | Read-intensive |
| PM883 480 GB | 480 GB | 550 / 520 MB/s | 98K / 24K IOPS | 683 TB (0.78 DWPD) | Read-intensive |
| PM883 960 GB | 960 GB | 550 / 520 MB/s | 98K / 25K IOPS | 1,366 TB (0.78 DWPD) | Read-intensive |
| PM883 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 25K IOPS | 2,733 TB (0.78 DWPD) | Read-intensive |
| PM883 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 28K IOPS | 5,466 TB (0.78 DWPD) | Read-intensive |
| SM883 480 GB | 480 GB | 540 / 520 MB/s | 97K / 27K IOPS | 2,628 TB (3.0 DWPD) | Mixed-use |
| PM863a 480 GB | 480 GB | 520 / 480 MB/s | 97K / 16K IOPS | 683 TB (0.78 DWPD) | Read-intensive |
| PM893 480 GB | 480 GB | 550 / 520 MB/s | 98K / 29K IOPS | 876 TB (1.0 DWPD) | Read-intensive |
The five PM883 rows are the pattern of the range: sequential read never moves, sequential write reaches 520 MB/s at this capacity and stays there, random write climbs from 24K to 28K, and endurance doubles with every step. So 480 GB is the entry point that behaves like the whole family rather than the compromise at the bottom of it.
Against the drive it replaces the gains are all on the read side and the write tail: 550/520 against 520/480 and 24K against 16K random write, at identical 683 TBW. Against the mixed-use twin the difference is endurance and random write, not throughput. And against the current-generation PM893 this drive gives up 5K of random write and 193 TB of endurance, but matches it on both sequential figures — which is why a legacy read-intensive drive at this capacity is still worth listing.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from — the PM883 is a legacy generation, so larger quantities are quoted against confirmed stock rather than a standing lead time. Send the quantity, the condition you need and the server model the drives are going into, and you will get a quote with lead time the same working day. Boot pairs are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV