960 GB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK960TBY-1AR1ZABYY
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 0.51 |
| TBW | 900 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 93K IOPS |
| Random Write IOPS | 28K IOPS |
| Power | 5 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5100 ECO 960 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK960TBY, ordering code MTFDDAK960TBY-1AR1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 28K random write IOPS at 4 KB, 900 TBW on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
This is the capacity where the 5100 ECO stops being the slow-writing option in its own family. The 480 GB member is capped at 380 MB/s sequential write, the same figure the MLC platform carries from 480 GB upward; from 960 GB upward the write rate rises to 520 MB/s, which is 37% more and puts the drive level with the fastest read-intensive SATA parts on this site. Random read stays at 93K across the family and random write drops slightly, from 31K at 480 GB to 28K here.
Sequential write in the 5100 ECO family is set by die count rather than by endurance class. The 480 GB member writes at 380 MB/s, and every capacity from 960 GB to 7.68 TB writes at 520 — a 37% step that happens once, at this point in the range, and never again. Read is 540 MB/s everywhere, and random read is 93K everywhere, so the only figure that changes between the small and the large members is the one that decides how long a backup restore or a bulk load takes.
Random write moves the other way, from 31K at 480 GB to 28K here, because the smaller member has proportionally more over-provisioning per die. That is a 10% drop on a figure that matters only when a queue forms, against a 37% gain on streaming throughput that matters whenever a large file moves. For most read-tier work the trade is clearly worth taking; for a queue-heavy small-block workload it is close to neutral.
The endurance rating does not change at this step. Both members are rated half a drive write a day, so this drive carries 900 TBW against 450 TB on the 480 GB part — exactly double, because the bytes doubled. Between these two capacities, capacity buys space and streaming speed without buying endurance. The class changes one step further up, where the 1.92 TB member moves to 0.9 drive writes a day and 3,200 TBW.
| Product family | Micron 5100 ECO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK960TBY (catalogue code) |
| Ordering code | MTFDDAK960TBY-1AR1ZABYY |
| Capacity | 960 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 3D enterprise TLC (eTLC) |
| Sequential read / write | 540 MB/s / 520 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 93K IOPS read / 28K IOPS write |
| Quality of service | 500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999% |
| Endurance | 900 TBW — 0.51 DWPD over five years, the 0.5-drive-writes-a-day class |
| TBW basis | Drive held full under a random write workload over the five-year rating period |
| Power | Typical 5 W; supply 5 V at the connector |
| Power-loss protection | Yes — data-protection capacitor with capacitor monitoring reported by firmware |
| Data security | AES 256-bit encryption, TCG Enterprise 1.0 SED |
| DRAM cache | Yes |
| Features | End-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase |
| Reliability | MTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz |
900 TB over five years is 493 GB of writes every day, just over half a full fill. Written flat out at 520 MB/s the rating would last about 20 days; the rating assumes that daily allowance spread across 1,825 days rather than a drive run at its ceiling. A volume that rewrites a third of its content daily uses 320 GB, or 65% of the allowance, and a volume that rewrites everything once a day uses 195% and halves the rated life.
Set against the older platform at the same capacity, the picture is a straight trade. The M510DC at 960 GB carries 1,140 TBW — 27% more write budget — and 10.5K random write, which is less than half of this drive's figure. Everything else favours the 5100 ECO: 540/520 against 420/380 on sequential, 93K against 65K on random read, 5 W against 6.3 W on power, and a latency floor of 500 µs against 3.0 ms on the write path.
That combination makes this the capacity to buy when a 1 TB read tier has to move data quickly and last five years without being rewritten. The M510DC remains the right part when the volume is written daily at a rate above half a fill, and the mixed-use parts from other lines remain the answer when endurance rather than either of these matters.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK960TBY | Catalogue code | New / used | Enquire |
| MTFDDAK960TBY-1AR1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 960 is the capacity, the block after it identifies the family and endurance tier, and everything after the hyphen is the configuration string Micron assigns at order entry. The suffix -1AR1ZABYY is assigned per SKU, so quote the full string when the endurance tier and capacity both matter.
The tier matters more than the capacity here. The 5100 platform ships in ECO, PRO and MAX at overlapping capacities in the same 7 mm case, and the three differ by a multiple in write budget: at 480 GB the MAX tier carries nearly ten times the ECO figure. A purchase order written against a generic "5100 960GB" does not identify which of the three it means, and shipping against it risks a drive whose endurance class is nothing like the one that was specified.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| Micron 5100 ECO 960 GB | 960 GB | 540 / 520 MB/s | 93K / 28K IOPS | 900 TB (0.51 DWPD) | Read-intensive, 3D eTLC |
| Micron 5100 ECO 480 GB | 480 GB | 540 / 380 MB/s | 93K / 31K IOPS | 450 TB (0.51 DWPD) | Same family, half capacity |
| Micron M510DC 960 GB | 960 GB | 420 / 380 MB/s | 65K / 10.5K IOPS | 1,140 TB (0.65 DWPD) | Read-intensive, 16nm MLC |
| Micron M510DC 800 GB | 800 GB | 420 / 380 MB/s | 65K / 30K IOPS | 2,500 TB (1.7 DWPD) | Read-intensive, 16nm MLC |
| Samsung SM883 960 GB | 960 GB | 540 / 520 MB/s | 97K / 29K IOPS | 5,256 TB (3.0 DWPD) | Mixed-use, MLC |
| Samsung PM893 960 GB | 960 GB | 550 / 520 MB/s | 98K / 30K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive, TLC |
| Samsung PM883 960 GB | 960 GB | 550 / 520 MB/s | 98K / 25K IOPS | 1,366 TB (0.78 DWPD) | Read-intensive, TLC |
On throughput this drive is joint first of seven on sequential write, at 520 MB/s alongside three other rows, and level with the SM883 on read at 540 MB/s behind only the 550 MB/s two Samsung TLC parts quote. On write latency it is the strongest in the table, 500 µs against 2.0 to 3.0 ms on the older MLC parts, with read latency equal to theirs at 500 µs. On endurance it is last but one, ahead only of its own 480 GB member, with 900 TB against 1,366 to 5,256 TB on the other five rows.
The two rows that matter in practice are the M510DC 960 GB directly below it and the PM893 960 GB two rows further down. The M510DC wins on endurance and loses on every performance line; the PM893 wins on endurance and random read and matches it on sequential write. So this drive is not the endurance purchase at 960 GB — it is the latency purchase, and the case for it is a read tier that serves small blocks and briefly moves large files.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is listed with a starting price rather than quoted, so the figure on the page is the entry point for a tested pull; new units and larger quantities are quoted per order, and the number moves with condition and batch. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV