Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ7KM960HMJP · Samsung

Samsung SM863a 960GB SATA SSD (MZ7KM960HMJP)

960 GB 2.5-inch SATA mixed-use SSD, ordering code MZ7KM960HMJP-00005

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ7KM960HMJP
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 960 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 3.5
TBW 6,160 TB
Sequential Read 510 MB/s
Sequential Write 485 MB/s
Random Read IOPS 95K IOPS
Random Write IOPS 25K IOPS
Power 2.5 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption SED
Condition New · Used

Frequently Asked Questions

The model name on the label is MZ7KM960HMJP and the ordering code is MZ7KM960HMJP-00005. The suffix encodes packing type and customer code rather than a specification variant, so it does not change capacity or endurance. Both strings describe the same 960 GB drive in the 2.5-inch 7 mm SATA form factor.

A third more random write, 19K to 25K IOPS, and twice the endurance, 3,080 to 6,160 TBW. Sequential stays at 510/485 MB/s and the drive-writes-per-day rating stays at 3.5. Above 960 GB only random write moves again, to 28K at 1.92 TB, so if the working set fits in 960 GB the larger drive buys nothing but space.

3.4 TB per day for five years, which is 6,160 TBW spread over 1,825 days at 3.5 drive-writes-per-day. For scale: four busy VMs at 100 GB each per day plus a database log and a backup staging copy lands around 0.6 TB per day, about 18% of the budget. Sustained writing at 485 MB/s would exhaust the rating in roughly 147 days, so it is still not a scratch device.

The PM893 is faster on paper — 550/520 MB/s and 98K/30K IOPS — and it adds a published PLP specification, TCG Opal 2.0 and continued production. Its endurance is 1,752 TBW at 1.0 DWPD, which is 28% of this drive's 6,160 TBW at 3.5 DWPD. For a read-mostly volume the PM893 is the better drive; for a volume with a real write stream, the endurance difference is the deciding factor.

Samsung specifies power loss protection for the write cache on this generation, with end-to-end data protection, but publishes no hold-up time, so it covers a brief interruption rather than guaranteeing a flush window in every condition. On a drive holding a live datastore, keep the RAID controller cache or a UPS in the design. There is no TCG Opal, only a plain AES 256-bit engine.

Because the generation is out of production and the stock position changes batch by batch: new old stock and decommissioned pulls arrive in different wear bands and quantities, and a single listed number would misrepresent both condition and availability. Send quantity, condition and the target server or array, and the quote with lead time comes back the same working day, with firmware revision and wear level matched across a set where stock allows.

Samsung SM863a 960 GB, 2.5-inch 7 mm SATA, catalogue code MZ7KM960HMJP, ordering code MZ7KM960HMJP-00005. The mixed-use member of Samsung's 2016 SATA family at the capacity where it stops being a specialist part: 510 MB/s sequential read, 485 MB/s sequential write, 95K random read and 25K random write IOPS, and 6,160 TBW — a 3.5 drive-writes-per-day rating over five years.

960 GB is the point where a mixed-use drive becomes a data volume rather than a supporting actor. At 240 GB this family is a boot pair or a journal; at 480 GB it covers a whole 1U node; here it holds a working set — a database, a mailbox store, a virtualisation datastore with real write traffic — at an endurance rating that read-intensive drives in the same form factor do not approach. The capacity matches the largest current-generation SATA part Samsung makes, with three and a half times the write budget.

Underneath it is the usual 2016 design: 48-layer V-NAND TLC behind a Samsung Mercury controller with a DRAM write cache, end-to-end data protection, an AES 256-bit engine, 2 million hours MTBF, and a 7 mm case at 60 g. Stock is held in both conditions; quotes are issued per order rather than listed, for the reasons set out at the bottom of this page.

What the last step in the range buys

Read the family figures in sequence: 480 GB runs 510/485 MB/s with 95K/19K IOPS, this drive runs 510/485 with 95K/25K, and 1.92 TB runs 510/485 with 95K/28K. Sequential throughput has been at its ceiling since 480 GB and never moves again. What the step to 960 GB buys is a third more random write — 19K to 25K IOPS — and twice the endurance, 3,080 TB to 6,160 TB.

The random-write figure is the one that matters at this size, because it is what a drive needs when several workloads share it. A single log volume writes sequentially and never notices; a datastore hosting a dozen virtual machines issues scattered 4 KB writes from a dozen queues at once, and that is precisely the pattern the plane count and the over-provisioning reserve are there to absorb. Twenty-five thousand IOPS at queue depth 32 is the difference between a queue that drains and one that grows.

Above this capacity only the last increment remains: 1.92 TB takes random write to 28K, a further 12%, and doubles endurance again. If the working set fits in 960 GB, the larger drive buys nothing else — the same sequential rating, the same interface, the same watt — which is why this is the capacity most often specified when a node has two bays for data and a separate pair for boot.

Technical specifications

Product familySamsung SM863a (V-NAND SSD, data centre / mixed-use)
PNMZ7KM960HMJP (catalogue code)
Ordering codeMZ7KM960HMJP-00005
Capacity960 GB (960 GB decimal)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 6.8 mm, max 60 g)
InterfaceSATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s
ControllerSamsung Mercury, with DRAM write cache
NANDSamsung V-NAND TLC (48-layer), with mixed-use over-provisioning
Sequential read / write510 MB/s / 485 MB/s (128 KB, QD32)
Random 4 KB (QD32)95K IOPS read / 25K IOPS write
Endurance6,160 TBW — 3.5 DWPD over a 5-year basis (Samsung's brochure quotes 3.6; the published TBW works out to 3.5)
PowerIdle 1.4 W; active 2.5 W read / 3 W write (family typical figures, published at 1,920 GB); supply 5 V ±5%
Power-loss protectionYes — Samsung specifies write-cache protection for this generation; no hold-up time is published
Data securityAES 256-bit encryption engine; no TCG Opal
FeaturesTRIM, NCQ to depth 32, S.M.A.R.T., Dynamic Thermal Guard, end-to-end data protection
ReliabilityMTBF 2.0 million hours; UBER 1 sector per 1017 bits read; operating 0 °C to 70 °C
Shock1,500 G at 0.5 ms, half sine wave
StatusEnd of life — Samsung has discontinued the SM863a generation

Ordering codes we can supply at 960 GB

CodeTypeConditionQuote
MZ7KM960HMJPCatalogue codeNew / usedEnquire
MZ7KM960HMJP-00005Ordering codeNew / usedEnquire

Both strings describe the same 960 GB drive. MZ7KM960HMJP is the model name printed on the label and the one this catalogue and most asset registers index on; MZ7KM960HMJP-00005 is the ordering code a PO line and a warranty claim are written against. The suffix encodes packing type and customer code, so it does not change capacity, endurance or firmware behaviour.

6,160 TBW is 3.4 TB a day for five years

Stated per day rather than per drive, the rating is what a customer can actually plan against: 3.4 TB of writes every day for 1,825 days. Twice the drive-writes-per-day of a read-intensive part in the same form factor, and five and a half times the absolute bytes of the read-intensive 240 GB part that starts this catalogue. The percentage never changes across the SM863a range — 3.5 everywhere — but the daily allowance doubles at every capacity step, which is the whole reason to buy the larger drive.

Put against a real workload: a virtualisation host with four busiest VMs writing 100 GB each per day, plus a database writing its log and a backup staging copy, lands around 0.6 TB a day. That is 18% of this drive's allowance, or a five-year life with room for the workload to grow. The same set of workloads on a read-intensive 960 GB drive would be using a third of its budget from day one, with no headroom for a rebuild, a restore, or a heavier quarter.

The ceiling is still real. Written flat out at 485 MB/s this drive would exhaust 6,160 TB in about 147 days, so nothing here reclassifies SATA TLC as an archive medium. What the endurance buys is headroom above a live workload, not permission to treat the drive as a scratch device.

What is missing compared with a current-generation drive

Three things. Power-loss protection is specified but unquantified: Samsung's documentation states that this generation safeguards data in the write cache when power fails and adds end-to-end protection, but publishes no hold-up time — cover for a brief interruption, not a guaranteed flush window. On a drive holding a live datastore, that means the RAID cache or the UPS is part of the design, not an accessory. There is no TCG Opal, only a plain AES 256-bit engine. And the generation is out of production.

The current-generation comparison is not a straight replacement. The PM893 at 960 GB is faster on every paper figure — 550/520 MB/s, 98K/30K IOPS — and it adds a published PLP specification, TCG Opal 2.0 and continued production. Its endurance is 1,752 TBW at 1.0 DWPD, which is 28% of this drive's budget. For a read-mostly volume the PM893 is simply the better drive; for a volume that writes all day, three and a half times the budget is not a rounding difference.

Where this drive is the wrong answer: a new build with no RAID cache and no UPS, a read-mostly workload, and any design that needs Opal-class encryption managed on the drive. Where it is right: an existing platform whose controller and firmware are qualified against this part number, a live volume with a real write stream in front of it, and a fleet whose asset records already carry MZ7KM960HMJP.

How 960 GB compares with the SM863a range and the read-intensive twin

ModelCapacitySequential read / writeRandom read / writeEnduranceClass
SM863a 240 GB240 GB410 / 450 MB/s90K / 10K IOPS1,540 TB (3.5 DWPD)Mixed-use
SM863a 480 GB480 GB510 / 485 MB/s95K / 19K IOPS3,080 TB (3.5 DWPD)Mixed-use
SM863a 960 GB960 GB510 / 485 MB/s95K / 25K IOPS6,160 TB (3.5 DWPD)Mixed-use
SM863a 1.92 TB1.92 TB510 / 485 MB/s95K / 28K IOPS12,320 TB (3.5 DWPD)Mixed-use
PM863a 960 GB960 GB520 / 480 MB/s97K / 24K IOPS1,366 TB (0.78 DWPD)Read-intensive

The last row is the same capacity in the read-intensive class, and it is closer than expected on paper: 520/480 against 510/485, and 24K random write against 25K. What separates them is endurance, 6,160 TB against 1,366 TB — four and a half times — and the published PLP specification the read-intensive generation does not carry either. Read the four mixed-use rows together and the family is remarkably flat above 480 GB: same sequential, random write inching from 19K to 28K, endurance doubling per step. Capacity, not speed, is what the money moves.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, for two ordinary reasons. The generation is out of production, so what is available at any moment is a mix of new old stock and decommissioned pulls in varying wear bands, and a single number would misrepresent both. And the price of a 960 GB mixed-use drive moves with each batch that arrives, in a way that a 240 GB boot drive does not. Send the quantity, the condition you need, and the server model or array the drives are going into, and you will get a quote with lead time the same working day; tell us if the units are going into an existing parity group and we will match firmware revision and wear level across the set.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View