960 GB 2.5-inch SATA mixed-use SSD, ordering codes MZ7L3960HELA-00A07 / -00B07
| Capacity | 960 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 3 |
| TBW | 5,256 TB |
| Sequential Read | 560 MB/s |
| Sequential Write | 530 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 60K IOPS |
| Power | 2.3 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM897a 960 GB, 2.5-inch 7 mm SATA, catalogue code MZ7L3960HELA, ordering codes MZ7L3960HELA-00A07 and MZ7L3960HELA-00B07. 560 MB/s sequential read, 530 MB/s sequential write, 97K random read and 60K random write IOPS at 4 KB, 5,256 TBW — 3.0 drive-writes-per-day over five years — on Samsung 3-bit TLC V-NAND, with TCG Opal 2.0 and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.
Of the four capacities in this range, 960 GB is the one whose model number is easiest to get wrong. The a-build uses three different build codes across its four parts, and this capacity has one of its own — HELA — which appears on no other member. The drive underneath is the familiar 960 GB mixed-use part at 5,256 TBW; the label is what needs reading carefully.
The earlier PM897 build groups its capacities in two pairs: 480 GB and 960 GB share HBLT, while 1.92 TB and 3.84 TB share HBNA. The a-build does not follow that pattern. It uses HELT at 480 GB, HELA here at 960 GB, and HENA at both the 1.92 TB member and 3.84 TB — three codes across four capacities, with this one unique to a single part.
That matters at the receiving bench rather than in the specification. A pallet of a-build drives will carry three different model strings that all begin MZ7L3 and all end in a four-character build code, and only the middle digits identify the capacity. Someone matching on the first six characters alone will mix a 960 GB and a 480 GB part; someone matching on the build code alone will treat this drive as if it shared HELT with the 480 GB member, which it does not.
Read the whole string. MZ7L3 is common to every PM897a capacity, the next three digits — 480, 960, 1T9, 3T8 — give the capacity, and the last four are the build. On this part the full catalogue code is MZ7L3960HELA and there is no shorter form that is unambiguous.
| Product family | Samsung PM897a (V-NAND SSD, data centre / mixed-use) |
|---|---|
| PN | MZ7L3960HELA (catalogue code) |
| Ordering code | MZ7L3960HELA-00A07 / MZ7L3960HELA-00B07 |
| Capacity | 960 GB (512-byte sectors, decimal capacity) |
| Form factor | 2.5-inch, 7.00 mm (100.20 × 69.85 × 7.00 mm, max 70 g) |
| Interface | SATA 6 Gb/s, Serial ATA 3.3, ATA/ATAPI ACS-4 |
| NAND | Samsung V-NAND, 3-bit (TLC) |
| Sequential read / write | 560 MB/s / 530 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 60K IOPS write |
| Random 8 KB (QD32) | 57K IOPS read / 40K IOPS write |
| IOPS consistency | 95% read / 90% write at 4 KB, sustained |
| Latency and QoS | 105 µs read / 30 µs write at QD1; 99.99th percentile 0.2 ms read, 0.05 ms write at QD1; 0.6 ms and 0.7 ms at QD32 |
| Endurance | 5,256 TBW — 3.0 DWPD over five years (TBW = DWPD × 365 × 5 × capacity) |
| Power | Active read 2.3 W; active write 3.0 W; idle 1.4 W (DIPM off); supply 5 V ±5% |
| Power-loss protection | Yes — capacitor hold-up transfers cached DRAM data to flash on failure; no hold-up time published |
| Data security | AES-XTS 256-bit encryption engine, TCG Opal 2.0 compliant |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data integrity, RoHS |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read |
| Environmental | Operating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7L3960HELA | Catalogue code | New / used | Enquire |
| MZ7L3960HELA-00A07 | Ordering code | New / used | Enquire |
| MZ7L3960HELA-00B07 | Ordering code | New / used | Enquire |
All three describe one 960 GB 2.5-inch 7 mm SATA drive with 5,256 TBW. The two suffixes are customer and firmware identities, not capacity or endurance grades, and both appear on parts in circulation. If a platform pins a firmware baseline, name the suffix on the PO; if it does not, either code will do and we will ship from the batch in hand.
The suffix family is worth one line of care because it is shared with another product. -00A07 and -00B07 appear on the read-intensive PM893a as well as on this a-build range; -00B7C belongs to the earlier PM897 build. A PO written against the wrong one is a different line item even where the drive underneath is identical.
Set this drive against the earlier PM897 build at 960 GB and every published figure is the same: 560/530 MB/s, 97K/60K IOPS, 95/90 consistency, 105/30 µs, 5,256 TBW at 3.0 DWPD, 2.3/3.0/1.4 W. The difference is the build code, HELA against HBLT, and the ordering suffix that follows it.
Samsung does not document what changed between the builds, and this page does not invent a reason. What is documented is that the specification did not change, which means the two are interchangeable on the bench: same capacity, same endurance, same performance, same 7 mm case. A mirror built from one of each is not a mismatch in anything except the asset register.
Where that becomes a real constraint is fleet management rather than engineering. A tool that groups drives by model number will report three models where a buyer expected one a-build family, and a firmware baseline pinned to HELA will not match an HBLT unit even though the drives perform identically. We select matched sets from a single build and batch where stock allows, which removes the question for any array built in one order.
5,256 TB over five years is 2.88 TB of writes every day, or a little over 20 TB a week. Written flat out at 530 MB/s the rating would last about 115 days, so the ceiling is finite but far outside anything a 960 GB volume produces in service. The daily figure is the one that maps onto operations: 2.88 TB is the whole drive written three times over, every day, for five years, and most volumes that fit on 960 GB do not come close to that.
The step from the 480 GB member of this range doubles the bytes and doubles the budget to 5,256 TB without changing a single performance figure — 560/530 MB/s and 97K/60K IOPS are identical at both capacities. So the step up is not a speed purchase and not a response to a bottleneck; it is the point where a volume stops being tight, and where a datastore and the database on it can share one device instead of two.
Against the read-intensive grade the budget is three times larger: the PM893 at 960 GB and the PM893a both carry 1,752 TBW at 1.0 DWPD. For a boot volume that is read for five years that is enough and the lower price is the right answer; for anything written daily it is a third of the headroom and a shorter service life.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM897a 960 GB | 960 GB | 560 / 530 MB/s | 97K / 60K IOPS | 5,256 TB (3.0 DWPD) | Mixed-use |
| PM897 960 GB | 960 GB | 560 / 530 MB/s | 97K / 60K IOPS | 5,256 TB (3.0 DWPD) | Mixed-use, earlier build |
| SM883 960 GB | 960 GB | 540 / 520 MB/s | 97K / 29K IOPS | 5,256 TB (3.0 DWPD) | Mixed-use, MLC |
| PM893a 960 GB | 960 GB | 560 / 530 MB/s | 97K / 31K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive |
| PM893 960 GB | 960 GB | 550 / 520 MB/s | 98K / 30K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive |
| PM883 960 GB | 960 GB | 550 / 520 MB/s | 98K / 25K IOPS | 1,366 TB (0.78 DWPD) | Read-intensive |
| PM863a 960 GB | 960 GB | 520 / 480 MB/s | 97K / 24K IOPS | 1,366 TB (0.78 DWPD) | Read-intensive |
The first two rows are the same drive under two build codes and they exist as separate entries only because the model numbers differ — identical in every column, including the random-write figure. The third row is the last MLC part at this capacity and the only one that matches the endurance while giving up throughput: 20 MB/s on the sequential lines and 29K random write against 60K. Below that the table splits by grade, and the split is a factor of three on write budget.
Read the class column and the choice becomes simple. Three mixed-use rows carry 5,256 TBW each; four read-intensive rows carry between 1,366 and 1,752 TBW and compete on read, where the PM893 edges ahead by 1K IOPS and the PM893a matches this drive exactly. Nothing in the read group should be specified for a volume that is written every day, and nothing in the mixed-use group is worth its price for a volume that is only read.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch. Send the quantity, the condition you need, the platform the drives are going into and — if it matters to your firmware baseline — which ordering code you need, and you will get a quote with lead time the same working day. Matched pairs for mirroring are selected from a single build and batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV