Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ7LH960HAJR · Samsung

Samsung PM883 960GB SATA SSD (MZ7LH960HAJR)

960 GB 2.5-inch SATA read-intensive SSD, ordering code MZ7LH960HAJR-00005

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ7LH960HAJR
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 960 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 0.78
TBW 1366 TB
Sequential Read 550 MB/s
Sequential Write 520 MB/s
Random Read IOPS 98K IOPS
Random Write IOPS 25K IOPS
Power 2.3 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption SED
Condition New · Used

Frequently Asked Questions

The catalogue code is MZ7LH960HAJR and the ordering code is MZ7LH960HAJR-00005. The trailing -00005 is the General SED customer code, a security and packing designation rather than a capacity variant, so both strings describe the same 960 GB 2.5-inch 7 mm SATA drive with 1,366 TBW. The L in the model name marks the 3-bit V-NAND line-up and JR the 2 Tb NAND package.

Barely. Both run 550/520 MB/s, both have 40 microsecond write latency and the same 99/90 consistency; the 960 GB adds 1K of random write (25K against 24K). What doubles is capacity and endurance, 1,366 TBW against 683. Above 480 GB this range stops improving on speed, so the choice is about room and write budget.

Because endurance scales with capacity while the class rating decides the intensity. This drive writes 0.78 drive-writes-per-day over 960 GB, which is 1,366 TB; the 240 GB SM883 writes 3.0 per day over 240 GB, which is 1,314 TB. Four times the capacity at a quarter of the intensity lands in the same place, and the read-intensive part does it at 2.3 W on read.

Both describe 1,366 TBW. Samsung rates the PM883 at 1.3 drive-writes-per-day over a three-year basis; spread the same 1,366 TB over five years and it is 0.78 DWPD, which is how we quote every drive so the numbers compare across the catalogue. The absolute endurance is unchanged.

Power loss: yes, with a caveat. Capacitor hold-up flushes the DRAM write cache to NAND and the drive returns to a ready state within ten seconds, which Samsung documents in its SPOR chapter, but no hold-up time is published, so it covers a brief interruption rather than guaranteeing a flush window. TCG Opal: no claim for this part. The -00005 code is a General SED device with an AES 256-bit engine.

On specification the PM893 wins: the same 550/520 MB/s, 30K random write instead of 25K, 1,752 TBW instead of 1,366, plus TCG Opal 2.0 and a published PLP specification. The PM883 is worth buying when the budget is fixed, the platform is already qualified around it, or a matched batch of pull-tested units is what the deployment needs.

Samsung PM883 960 GB, 2.5-inch 7 mm SATA, catalogue code MZ7LH960HAJR, ordering code MZ7LH960HAJR-00005. 550 MB/s sequential read, 520 MB/s sequential write, 98K random read and 25K random write IOPS, 1,366 TBW on 3-bit V-NAND behind a Samsung Maru controller. Stocked new or as tested pulls with a 1-year warranty from us.

At 960 GB the read-intensive range has finished improving: random write reaches 25K here, holds at 25K at 1.92 TB, climbs to 28K at 3.84 TB and settles at 27K on the 7.68 TB member. Sequential read has never moved from 550 MB/s. What the capacity does buy is room and write budget, and both double from the 480 GB member — 1,366 TB against 683, at an unchanged 0.78 drive-writes-per-day.

The useful thing to notice at this size is an arithmetic coincidence that is really a design point: 1,366 TBW is almost exactly the write budget of a 240 GB mixed-use drive from the same generation, which carries 1,314 TB. Capacity buys back the endurance that the read-intensive class gives up, four times over — a 960 GB read-intensive part outlasts a 240 GB mixed-use part in absolute terms while offering four times the room, and it does it at 2.3 W on read instead of 2.8 W.

The rest of the package is the generation's: 3-bit V-NAND with read-intensive over-provisioning, a Maru controller with a DRAM cache, a documented power-loss sequence where capacitor hold-up flushes the cache to NAND and the drive is ready within ten seconds, 99.99th-percentile latency of 0.5 ms read and 0.3 ms write at queue depth 1, a 2-million-hour MTBF, and no TCG Opal. It is a legacy design — Samsung's current SATA data-centre line is the PM893.

What 960 GB buys that 480 GB does not

Twice the capacity, twice the write budget, and one extra thousand random-write IOPS. That is the whole list, and it is worth stating plainly because the performance story of this range ends at 480 GB: sequential write already reaches 520 MB/s there, and write latency is already 40 µs. What does not change is the consistency figure — 99% read and 90% write across the entire range, at every capacity from 240 GB up.

So the decision at this capacity is about fitting a working set rather than about speed. 960 GB is the point where a read-intensive drive can hold an operating system, an application stack and a meaningful read cache on one device, or where a pair of them can mirror a small datastore without the capacity conversation coming up again in six months. Below this, the drive is a component of a design; here it starts being a volume.

The capacity also changes the rebuild arithmetic. A 960 GB drive written flat out at 520 MB/s would consume its entire 1,366 TB rating in about 30 days, which sounds alarming until you compare it with what the role actually does: a read-mostly volume writes a few hundred gigabytes a week. The 30-day figure is the honest measure of how small 1,366 TB is in absolute terms, and the reason this drive belongs on the read side of a workload.

Technical specifications

Product familySamsung PM883 (V-NAND SSD, data centre / read-intensive)
PNMZ7LH960HAJR (catalogue code)
Ordering codeMZ7LH960HAJR-00005 (General SED)
Capacity960 GB (1,875,385,008 sectors of 512 bytes)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 6.80 mm, max 70 g)
InterfaceSATA 6 Gb/s, ATA/ATAPI-7 and Serial ATA 3.3
ControllerSamsung Maru (Samsung LSI), with DRAM write cache
NANDSamsung V-NAND, 3-bit (TLC), 2 Tb 2-CE packages; read-intensive over-provisioning
Sequential read / write550 MB/s / 520 MB/s (128 KB, QD32)
Random 4 KB (QD32)98K IOPS read / 25K IOPS write
IOPS consistency99% read / 90% write at 4 KB
Latency and QoS120 µs read / 40 µs write at QD1; 99.99th percentile 0.5 ms read, 0.3 ms write at QD1; 0.9 ms and 3.2 ms at QD32
Endurance1,366 TBW — 0.78 DWPD on a five-year basis; Samsung quotes 1.3 DWPD against a three-year basis, which is the same 1,366 TB
PowerActive read 2.3 W; active write 3.1 W; idle 1.3 W; supply 5 V ±5%
Power-loss protectionYes — capacitor hold-up flushes DRAM to NAND; ready state within 10 s (SPOR). No hold-up time published
Data securityAES 256-bit encryption engine (General SED part); no TCG Opal claim
FeaturesTRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data protection, RoHS
ReliabilityMTBF 2.0 million hours; UBER 1 sector per 1017 bits read; data retention 3 months at 40 °C after rated endurance
EnvironmentalOperating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing
Shock and vibration1,500 G at 0.5 ms half sine; 20 G sine sweep, 20–2,000 Hz
StatusLegacy generation — Samsung's current SATA data-centre line is the PM893; supply here is remaining stock and pull-tested units

Ordering codes we can supply at 960 GB

CodeTypeConditionQuote
MZ7LH960HAJRCatalogue codeNew / usedEnquire
MZ7LH960HAJR-00005Ordering codeNew / usedEnquire

The model name reads the same way across the family: MZ for memory, 7 for the 2.5-inch 7 mm SATA form factor, L for the V-NAND 3-bit line-up where the mixed-use SM883 carries K, H for the Maru controller, 960 for capacity, H for the BGA NAND package, A for second-generation flash, JR for the 2 Tb 2-CE NAND density — the same package code the SM883 uses at this capacity — and -00005 for the General SED customer code. The suffix is a security and packing designation, not a capacity variant, and it is what a PO and a warranty claim are written against.

What 1,366 TBW means in a day

0.75 TB of writes every day for five years — 749 GB at 0.78 drive-writes-per-day, double the 480 GB member and a quarter of what the mixed-use SM883 at this capacity allows at 5,256 TB. For a boot volume, an application tier or an image repository that is written in bursts and read continuously, 749 GB a day is far more than the workload will use; for anything that writes at line rate, it is a month of sustained writing and nothing more.

Samsung rates the PM883 against a three-year basis, so the rating works out at 1.3 drive-writes-per-day; spread the same 1,366 TB over five years and it is 0.78, which is the figure we quote everywhere so that drives are comparable. The absolute number does not change with the assumption: 1.3 × 365 × 3 × 960 GB = 1,366 TB, and 0.78 × 365 × 5 × 960 GB is the same.

Inside the family the ladder is 341 / 683 / 1,366 / 2,733 / 5,466 TB from 240 GB to 3.84 TB, doubling at each step at an unchanged 0.78 DWPD. The current-generation PM893 at 960 GB carries 1,752 TB at 1.0 DWPD, which is the measure of what the newer part adds.

Where this drive fits, and what it does not have

The roles are read-dominated volumes rather than system disks: a hypervisor boot device or a mirrored pair, a read-mostly datastore for a handful of guests, an ISO and firmware repository that is read far more often than written, a web or application tier whose writes are logs and deployments, a backup restore target written in a window and read for a month, a container image store. In each of those the 550 MB/s read and 2.3 W active power are the numbers that matter, and the 90% write consistency never becomes visible.

Three limits, inherited from the generation. Power-loss protection is capacitor-based and documented but unquantified: the drive flushes its cache and returns to a ready state within ten seconds, but no hold-up time is published, so it does not replace a UPS on anything transactional. There is no TCG Opal 2.0 claim — the -00005 part is a General SED device with the AES 256-bit engine. And the generation is legacy: supply is remaining stock and pull-tested units rather than a lead time.

Where endurance rather than read speed is the requirement, the SM883 at this capacity carries 5,256 TB at 3.0 drive-writes-per-day, writes 29K random IOPS instead of 25K, and draws 0.5 W more on read. Where current-generation credentials are wanted, the PM893 carries Opal 2.0, a published PLP specification and 1,752 TBW. This drive is the right one when the volume is read-mostly, the capacity is right, and the budget is fixed.

How 960 GB compares with the PM883 range and the drives either side of it

ModelCapacitySequential read / writeRandom 4K read / writeEnduranceClass
PM883 480 GB480 GB550 / 520 MB/s98K / 24K IOPS683 TB (0.78 DWPD)Read-intensive
PM883 960 GB960 GB550 / 520 MB/s98K / 25K IOPS1,366 TB (0.78 DWPD)Read-intensive
PM883 1.92 TB1.92 TB550 / 520 MB/s98K / 25K IOPS2,733 TB (0.78 DWPD)Read-intensive
PM883 3.84 TB3.84 TB550 / 520 MB/s98K / 28K IOPS5,466 TB (0.78 DWPD)Read-intensive
SM883 960 GB960 GB540 / 520 MB/s97K / 29K IOPS5,256 TB (3.0 DWPD)Mixed-use
PM863a 960 GB960 GB520 / 480 MB/s97K / 24K IOPS1,366 TB (0.78 DWPD)Read-intensive
PM893 960 GB960 GB550 / 520 MB/s98K / 30K IOPS1,752 TB (1.0 DWPD)Read-intensive

The four PM883 rows show where the range stops developing: read is fixed at 550 MB/s across every capacity, write reaches 520 MB/s at 480 GB and stays there, and random write moves by only 3K between this drive and the 3.84 TB member listed here. Above 960 GB you are buying nothing but capacity and its proportional write budget.

Against the drive it replaces the gains are read-side and cheap: 550/520 against 520/480, 25K against 24K random write, at identical 1,366 TBW. Against the mixed-use twin the sequential write is identical at 520 MB/s, and the gap is in random write (29K against 25K) and endurance (5,256 TB against 1,366) — the latter being the single biggest reason to spend more. Against the PM893 this drive gives up 5K of random write, 386 TB of endurance and Opal support, at the same sequential figures.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from — the PM883 is a legacy generation, so larger quantities are quoted against confirmed stock rather than a standing lead time. Send the quantity, the condition you need and the server model the drives are going into, and you will get a quote with lead time the same working day. Boot pairs are matched from a single batch where stock allows, including firmware revision and wear level.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View