Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ7LM960HMJP · Samsung

Samsung PM863a 960GB SATA SSD (MZ7LM960HMJP)

960 GB 2.5-inch SATA read-intensive SSD, ordering code MZ7LM960HMJP-00005

New Used
From $230.00
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ7LM960HMJP
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 960 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 0.78
TBW 1366 TB
Sequential Read 520 MB/s
Sequential Write 480 MB/s
Random Read IOPS 97K IOPS
Random Write IOPS 24K IOPS
Power 3 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption SED
Condition New · Used

Frequently Asked Questions

The model name on the label is MZ7LM960HMJP and the ordering code is MZ7LM960HMJP-00005. The first is what this catalogue and most asset registers index on, the second is what a purchase order and a warranty claim are written against. Both describe the same 960 GB drive in the 2.5-inch 7 mm SATA form factor.

Only on random write. Sequential read and write are identical at 520/480 MB/s from 480 GB upward, and random read is 97K IOPS on both. What the 960 GB adds is random write depth, 24K IOPS against 16K, and it adds nothing else above that: the 1.92 TB and 3.84 TB parts post exactly the same figures. So this is the last capacity in the family where anything gets faster.

Power per bay and cost per bay. Every PM863a up to 960 GB draws 3 W for writing; at 1.92 TB and 3.84 TB the write figure rises to 4 W. In a dense 1U chassis or a shelf with a fixed per-slot allowance, 960 GB is the largest capacity that keeps the power ceiling where the smaller drives already put it, and it occupies the same 7 mm bay at the same 60 g.

Present but unquantified rather than absent. Samsung specifies power loss protection for the write cache on the PM863a, together with end-to-end data protection, but publishes no hold-up time, so it is reasonable cover against a brief interruption and not a substitute for a controller with a battery or flash-backed cache. Current-generation drives such as the PM893 certify PLP with a published specification.

Yes. Early PM863a firmware cleared the UECC flag incorrectly, which could let corrupted data be returned as valid; the fix landed in revision CD37 and later. Every unit we ship has the revision read and recorded, and anything below the fixed level is reflashed or rejected. Ask for the revision when you order and we will quote against it.

Samsung has discontinued the PM863a generation, so supply is decommissioned server stock and remaining channel inventory. That is why the part is inexpensive, and why larger quantities are quoted against confirmed stock rather than a standing lead time. Every drive we ship carries a 1-year warranty from us, and units are pull-tested with the SMART readout kept on file.

Samsung PM863a 960 GB, 2.5-inch 7 mm SATA, catalogue code MZ7LM960HMJP, ordering code MZ7LM960HMJP-00005. Rated 520 MB/s sequential read, 480 MB/s sequential write, 97K random read and 24K random write IOPS, 1,366 TBW. Stocked new or as tested pulls with a 1-year warranty from us.

960 GB is the point where the PM863a line stops getting faster. Random write reaches its ceiling here — 24K IOPS, up from 16K at 480 GB — and the two capacities above it post exactly the same read, write and IOPS figures. What they add is space, endurance and, at 1.92 TB and beyond, another watt of write power. This is therefore the largest drive in the family that runs a full enterprise duty cycle inside a 3 W write envelope.

Architecturally it is the same 2016 read-intensive design as the smaller members: 48-layer V-NAND TLC behind a Samsung Mercury controller with a DRAM write cache, 2 million hours MTBF, an AES 256-bit engine, and a 7 mm aluminium case. Samsung discontinued the generation, so what circulates now is decommissioned server stock plus remaining channel inventory.

Where the last performance step lands, and why it stops there

Read the tables across the range and the pattern is a single jump followed by a plateau. From 240 GB to 480 GB the drive gains 190 MB/s of sequential read and 180 MB/s of sequential write as the die count doubles. From 480 GB to 960 GB sequential stays put at 520/480 but random write climbs once more, 16K to 24K IOPS — a 50% gain in the only metric that was still short of the platform limit. Above 960 GB every figure is identical, down to the IOPS consistency rating of 97%.

The reason is the SATA link rather than the media. Sequential throughput is already within 10% of what a 6 Gb/s port can carry once the drive has enough die to saturate it, so adding more dies cannot add more sequential speed; what it can still do is deepen the write parallelism behind a random 4 KB stream, which is exactly what the 16K to 24K step represents. Past that point the controller, not the flash, is the constraint.

Practically that makes this the capacity to buy when the workload is random-read heavy with a real write component — a hypervisor datastore, a container registry, a document or metadata store — and the node is a fixed 2.5-inch SATA platform that will never see NVMe. Buying 1.92 TB instead buys twice the bytes at the same speed; buying 960 GB buys the same speed for less money and less power.

Technical specifications

Product familySamsung PM863a (V-NAND SSD, data centre / read-intensive)
PNMZ7LM960HMJP (catalogue code)
Ordering codeMZ7LM960HMJP-00005
Capacity960 GB (960 GB decimal)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 6.8 mm, max 55 g)
InterfaceSATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s
ControllerSamsung Mercury, with DRAM write cache
NANDSamsung V-NAND TLC (48-layer)
Sequential read / write520 MB/s / 480 MB/s (128 KB, QD32)
Random 4 KB (QD32)97K IOPS read / 24K IOPS write — 99% / 97% IOPS consistency
Endurance1,366 TBW — 0.78 DWPD over a 5-year basis; Samsung publishes 1.3 DWPD against a 3-year period
PowerIdle 1.3 W; active 3 W read / 3 W write; supply 5 V ±5%
Power-loss protectionYes — Samsung specifies write-cache protection for this generation; no hold-up time is published
Data securityAES 256-bit encryption engine (self-encrypting drive); no TCG Opal
FeaturesTRIM, NCQ to depth 32, S.M.A.R.T., Dynamic Thermal Guard
ReliabilityMTBF 2.0 million hours; UBER 1 sector per 1017 bits read; operating 0 °C to 70 °C
Shock1,500 G at 0.5 ms, half sine wave
StatusEnd of life — Samsung has discontinued the PM863a generation

Ordering codes we can supply at 960 GB

CodeTypeConditionQuote
MZ7LM960HMJPCatalogue codeNew / usedEnquire
MZ7LM960HMJP-00005Ordering codeNew / usedEnquire

Both strings describe the same 960 GB drive. MZ7LM960HMJP is the model name printed on the label and the one this catalogue and most asset registers index on; MZ7LM960HMJP-00005 is the ordering code a PO line and a warranty claim are written against. Quote whichever your paperwork carries.

The largest capacity that holds a 3 W write envelope

Look at the power column rather than the capacity column and this drive has a second, less obvious justification. Every PM863a draws 3 W for writing up to 960 GB; at 1.92 TB and 3.84 TB the write figure rises to 4 W. On a node with two drives the difference is irrelevant. On a 1U chassis carrying ten 2.5-inch bays, or a storage shelf where the entire budget is fixed by a 25 W or 40 W per-slot allowance, the difference between 3 W and 4 W per drive is what decides whether a bay can be populated at all — and 960 GB is the largest capacity in the family that never leaves the lower bracket.

The read figure is 3 W across the whole range and idle is 1.3 W at every capacity, so a rack full of these behaves predictably: the ceiling you design for is set by the write number, and staying at 960 GB keeps that ceiling where the smaller drives already put it. Power per terabyte, not power per drive, is the number to compare between this and the 1.92 TB part — and once the write power steps up at 1.92 TB the per-terabyte advantage narrows to almost nothing.

The physical envelope does not change either. Same 7 mm height, same 100.2 × 69.85 mm footprint, same 55 g ceiling as the rest of the family, so a specification written around a 480 GB drive accepts this one without re-qualification of the bay, the carrier or the airflow.

What is missing compared with a current-generation drive

Three things, the same three at every capacity. Power-loss protection is present but unquantified: Samsung specifies write-cache protection and end-to-end data protection for the PM863a and publishes no hold-up time, which makes it sound cover for a brief interruption rather than a replacement for a controller with a battery or flash-backed cache. There is no TCG Opal, only a plain AES 256-bit engine, so encryption is managed in software rather than through key management on the drive. And the generation is out of production, which matters for spares planning more than for performance.

Against the PM893 at 960 GB the numbers are close enough that the decision is not about speed. The current drive runs 550/520 MB/s with 98K/30K IOPS, 1,752 TBW at a full 1.0 DWPD, capacitor-backed PLP, TCG Opal 2.0 and 3.2 W active — a straight upgrade on every line, including endurance per terabyte. The PM863a answers with 520/480, 97K/24K, 1,366 TBW at 0.78 DWPD and 3 W, and a price that reflects a generation of depreciation.

Where that trade makes sense: existing fleets whose part number is already qualified and whose controllers are already certified against this drive; boot and read tiers where the data is reproducible; and cost-sensitive builds where the difference between 0.78 and 1.0 DWPD is theoretical because the workload writes a fraction of either. Where it does not: any node with no RAID cache sitting in front of the drive, and any design with a five-to-seven-year service life starting today. For a smaller cold tier the 480 GB member does the same job for less, at a lower write throughput; if the requirement is merely less capacity on the current generation, the PM893 at 480 GB is the comparison to run instead.

How 960 GB compares with the rest of the PM863a family

ModelCapacitySequential read / writeRandom read / writeEnduranceActive power
PM863a 240 GB240 GB330 / 300 MB/s86K / 9K IOPS341 TB (0.78 DWPD)3 / 3 W
PM863a 480 GB480 GB520 / 480 MB/s97K / 16K IOPS683 TB (0.78 DWPD)3 / 3 W
PM863a 960 GB960 GB520 / 480 MB/s97K / 24K IOPS1,366 TB (0.78 DWPD)3 / 3 W
PM863a 1.92 TB1.92 TB520 / 480 MB/s97K / 24K IOPS2,733 TB (0.78 DWPD)3 / 4 W
PM863a 3.84 TB3.84 TB520 / 480 MB/s97K / 24K IOPS5,466 TB (0.78 DWPD)3 / 4 W

Two rows above this one are worth reading together: at 1.92 TB and 3.84 TB the performance columns are frozen and only endurance and write power move. That makes the choice between 960 GB and 1.92 TB a pure question of space per bay against watts per bay, not of speed. Below this row, 480 GB gives up 8K random write IOPS and half the endurance to save a third of the capacity; 240 GB is a boot device at 330/300 MB/s and belongs in a different conversation.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

Pricing is quoted per order because condition and quantity both move it. Send the quantity, the condition you need and the server model the drive is going into, and you will get a quote with lead time the same working day. Arrays are usually ordered in even numbers and we will match units from a single batch where stock allows, including firmware revision. Because the PM863a generation is end-of-life, larger quantities are quoted against confirmed stock rather than a standing lead time.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View