1.92 TB 2.5-inch SATA read-intensive SSD, ordering code MZ7LH1T9HMLT-00005
| Capacity | 1.92 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 0.78 |
| TBW | 2,733 TB |
| Sequential Read | 550 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 98K IOPS |
| Random Write IOPS | 25K IOPS |
| Power | 2.3 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | SED |
| Condition | New · Used |
Samsung PM883 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MZ7LH1T9HMLT, ordering code MZ7LH1T9HMLT-00005. 550 MB/s sequential read, 520 MB/s sequential write, 98K random read and 25K random write IOPS, 2,733 TBW on 3-bit V-NAND behind a Samsung Maru controller. Stocked new or as tested pulls with a 1-year warranty from us.
This is the last capacity in the range where anything changes: random write stays at 25K, the same as the 960 GB member, and only the 3.84 TB drive goes higher at 28K — the 7.68 TB member, which Samsung added in its OEM specification sheet, is rated 27K. What doubles here is capacity and write budget — 2,733 TB against 1,366 — at an unchanged 0.78 drive-writes-per-day. Throughput has been at 550/520 MB/s since 480 GB and does not move again.
There is one number that goes the wrong way at this capacity, and it is worth knowing. Read latency rises from 120 µs to 140 µs here and stays at 140 at 3.84 TB, because a larger addressable space costs a little lookup time before the first read comes back. It does not show in IOPS at queue depth 32 — those stay at 98K — but it is the reason a 960 GB drive can feel marginally quicker than this one on single-queue random reads despite identical ratings.
The rest of the package is the generation's: 3-bit V-NAND with read-intensive over-provisioning, a Maru controller with a DRAM cache, a documented power-loss sequence where capacitor hold-up flushes the cache to NAND and the drive is ready within ten seconds, a 2-million-hour MTBF, and no TCG Opal. It is a legacy design — Samsung's current SATA data-centre line is the PM893 — and at this capacity it competes as much on density as on anything else.
Twice the room, twice the write budget, and nothing else. That sounds like a small return for a doubling of capacity, but it is the whole point of the top half of this range: once a SATA drive reaches 520 MB/s sequential and 25K random write, more capacity cannot make it faster, because the interface and the controller are already the limit. What more capacity does is remove devices from the design.
That matters in ways the numbers do not show. One 1.92 TB drive replaces two 960 GB drives, which halves the number of slots, ports, firmware records and failure domains for the same presented capacity. In a 1U server with ten 2.5-inch bays, that is the difference between using five bays and using ten — and on a read-mostly tier, where the drives are mostly idle, it is also half the idle power: 1.3 W per drive instead of two of them.
The endurance arithmetic is the other effect. 2,733 TB is the first point at which a read-intensive drive in this generation carries more absolute write budget than a mixed-use drive two capacities smaller: the 480 GB SM883 is rated 2,628 TB at 3.0 drive-writes-per-day. Capacity buys back the endurance the class gives up, and this is where the lines cross.
| Product family | Samsung PM883 (V-NAND SSD, data centre / read-intensive) |
|---|---|
| PN | MZ7LH1T9HMLT (catalogue code) |
| Ordering code | MZ7LH1T9HMLT-00005 (General SED) |
| Capacity | 1.92 TB (3,750,748,848 sectors of 512 bytes) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 6.80 mm, max 70 g) |
| Interface | SATA 6 Gb/s, ATA/ATAPI-7 and Serial ATA 3.3 |
| Controller | Samsung Maru (Samsung LSI), with DRAM write cache |
| NAND | Samsung V-NAND, 3-bit (TLC), 4 Tb 2-CE packages; read-intensive over-provisioning |
| Sequential read / write | 550 MB/s / 520 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 98K IOPS read / 25K IOPS write |
| IOPS consistency | 99% read / 90% write at 4 KB |
| Latency and QoS | 140 µs read / 40 µs write at QD1; 99.99th percentile 0.5 ms read, 0.3 ms write at QD1; 0.9 ms and 3.2 ms at QD32 |
| Endurance | 2,733 TBW — 0.78 DWPD on a five-year basis; Samsung quotes 1.3 DWPD against a three-year basis, which is the same 2,733 TB |
| Power | Active read 2.3 W; active write 3.4 W; idle 1.3 W; supply 5 V ±5% |
| Power-loss protection | Yes — capacitor hold-up flushes DRAM to NAND; ready state within 10 s (SPOR). No hold-up time published |
| Data security | AES 256-bit encryption engine (General SED part); no TCG Opal claim |
| Features | TRIM, NCQ to depth 32, S.M.A.R.T., end-to-end data protection, RoHS |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read; data retention 3 months at 40 °C after rated endurance |
| Environmental | Operating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing |
| Shock and vibration | 1,500 G at 0.5 ms half sine; 20 G sine sweep, 20–2,000 Hz |
| Status | Legacy generation — Samsung's current SATA data-centre line is the PM893; supply here is remaining stock and pull-tested units |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7LH1T9HMLT | Catalogue code | New / used | Enquire |
| MZ7LH1T9HMLT-00005 | Ordering code | New / used | Enquire |
The model name reads across as usual, and one field differs from the smaller members: MZ for memory, 7 for the 2.5-inch 7 mm SATA form factor, L for the V-NAND 3-bit line-up where the mixed-use SM883 carries K, H for the Maru controller, 1T9 for 1.92 TB, H for the BGA NAND package, M for first-generation flash — the 240 GB, 480 GB and 960 GB members carry A for second-generation — LT for the 4 Tb 2-CE NAND density, the SATA 3.3 package code where the smaller drives carry HQ and JR, and -00005 for the General SED customer code. The suffix is a security and packing designation, not a capacity variant, and it is what a PO and a warranty claim are written against.
1.5 TB of writes every day for five years — 1,497 GB at 0.78 drive-writes-per-day, double the 960 GB member. Written flat out at 520 MB/s the rating would be gone in about 61 days, which is the honest scale of the number: 2,733 TB is a lot for a read-mostly volume and very little for anything that writes at line rate. For an image library, a restore target or a read-heavy datastore it is comfortably enough; for a log volume it is not, and the mixed-use drive at this capacity carries 5,256 TB for exactly that reason.
Samsung states the PM883 against a three-year basis, so the rating works out at 1.3 drive-writes-per-day; spread the same 2,733 TB over five years and it is 0.78, which is how we quote every drive so the figures compare. The arithmetic is exact either way: 1.3 × 365 × 3 × 1,920 GB = 2,733 TB.
Inside the family the ladder runs 341 / 683 / 1,366 / 2,733 / 5,466 TB from 240 GB to 3.84 TB, doubling at each step at 0.78 DWPD. The current-generation PM893 at 1.92 TB carries 3,504 TB at 1.0 DWPD — 28% more write budget and 5K more random write, which is what the newer part adds.
The roles are large and read-dominated: a datastore for a cluster of read-heavy guests, an image or artefact library, a backup restore target that is written in a window and read for a month, an analytics scratch area whose writes are bulk loads rather than updates, a media or content store. At 1.92 TB the drive is dense enough to be the whole tier in a small server, and cheap enough per terabyte to be the second tier in a large one.
Three limits, inherited from the generation. Power-loss protection is capacitor-based and documented but unquantified: the drive flushes its cache and returns to a ready state within ten seconds, but no hold-up time is published, so it does not replace a UPS on anything transactional. There is no TCG Opal 2.0 claim — the -00005 part is a General SED device with the AES 256-bit engine. And the generation is legacy: supply is remaining stock and pull-tested units, and at 1.92 TB a matched pair is worth buying while it exists.
Where endurance matters more than read speed, the SM883 at this capacity carries 5,256 TB at 3.0 drive-writes-per-day and writes 29K random IOPS instead of 25K, for 0.5 W more on read. Where current-generation credentials matter, the PM893 carries Opal 2.0, a published PLP specification and 3,504 TBW. This drive is the right one when the volume is read-mostly, the density is the point, and the budget is fixed.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM883 480 GB | 480 GB | 550 / 520 MB/s | 98K / 24K IOPS | 683 TB (0.78 DWPD) | Read-intensive |
| PM883 960 GB | 960 GB | 550 / 520 MB/s | 98K / 25K IOPS | 1,366 TB (0.78 DWPD) | Read-intensive |
| PM883 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 25K IOPS | 2,733 TB (0.78 DWPD) | Read-intensive |
| PM883 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 28K IOPS | 5,466 TB (0.78 DWPD) | Read-intensive |
| PM883 7.68 TB | 7.68 TB | 550 / 520 MB/s | 98K / 27K IOPS | 10,932 TB (0.78 DWPD) | Read-intensive |
| SM883 1.92 TB | 1.92 TB | 540 / 520 MB/s | 97K / 29K IOPS | 10,512 TB (3.0 DWPD) | Mixed-use |
| PM863a 1.92 TB | 1.92 TB | 520 / 480 MB/s | 97K / 24K IOPS | 2,733 TB (0.78 DWPD) | Read-intensive |
| PM893 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 30K IOPS | 3,504 TB (1.0 DWPD) | Read-intensive |
The five PM883 rows show a range that has stopped developing above 960 GB: read is fixed at 550 MB/s from 240 GB up, write at 520 MB/s from 480 GB up, and random write moves by 2K in total between this drive and the largest capacity. What doubles at each step is capacity and, proportionally, the write budget.
Against the drive it replaces the gains are on the read side and are modest: 550/520 against 520/480 and 25K against 24K random write, at identical 2,733 TBW. Against the mixed-use twin sequential write is identical at 520 MB/s and the gap is 29K against 25K random write and 10,512 TB against 2,733 of endurance. Against the PM893 this drive gives up 5K of random write, 771 TB of endurance and Opal support, at the same sequential figures.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from — the PM883 is a legacy generation, so larger quantities are quoted against confirmed stock rather than a standing lead time. Send the quantity, the condition you need and the server model the drives are going into, and you will get a quote with lead time the same working day. Pairs destined for a mirror are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV