1.92 TB 2.5-inch SATA enterprise SSD, ordering codes -00A07 / -00W07 / -00B7C
| Capacity | 1.92 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 3,504 TB |
| Sequential Read | 550 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 98K IOPS |
| Random Write IOPS | 30K IOPS |
| Power | 3.2 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM893 1.92 TB in the 2.5-inch 7 mm SATA form factor, catalogued under MZ-7L31T900 and supplied under the three ordering codes that carry the same build: MZ7L31T9HBLT-00A07, MZ7L31T9HBLT-00W07 and MZ7L31T9HBLT-00B7C. 550 MB/s sequential read, 520 MB/s sequential write, 3,504 TBW, power-loss protection. Supplied new or as tested pulls, with a 1-year warranty from us.
1.92 TB is the first capacity in this family that belongs to the data tier rather than the boot pair. Two of them mirrored give 1.92 TB usable; ten in a 2U give a working pool. Endurance of 3,504 TBW is twice the 960 GB part and four times the 480 GB, which is what a volume written every day actually needs.
The performance ceiling does not move: 550/520 MB/s and 98K/30K IOPS is the same as 960 GB and the same as 7.68 TB. Above this point the family sells endurance and space, not speed, so the question at 1.92 TB is whether the pool needs more than one drive's worth of wear before something else replaces it.
Everything else is the standard SATA feature set: hot-swap 7 mm bays, 6 Gb/s falling back to 3 Gb/s and 1.5 Gb/s, SAS backplanes whose expander accepts SATA targets, PLP capacitors, AES 256-bit full-disk encryption with TCG Opal 2.0 and IEEE 1667, TRIM, garbage collection and S.M.A.R.T. Active power averages 2.2 W reading and 3.2 W writing with 1.5 W idle, so a ten-drive bay adds roughly 32 W to the node.
Below this capacity the parts are building blocks around an operating system. At 1.92 TB the arithmetic changes: 3,504 TBW is 1.0 drive-write-per-day over five years (3,504 ÷ (1.92 × 365 × 5) = 1.0), and a 2U with twelve of these holds 23 TB raw — a usable pool for backup staging, a file tier or a virtualisation cluster, not two slots doing duty as a system disk.
That is the practical place to start a tier. A pair of 960 GB drives buys local storage for one host; a set of 1.92 TB drives buys a pool, at half the drive count of the same raw capacity in 960 GB parts. The Samsung PM893 960 GB remains the better buy when the scope really is one node.
1 DWPD is a read-intensive rating, and the honest description is that it covers an operating system, a virtualisation datastore, a boot-from-SAN image or a backup landing zone — not a write cache, not a journal, not a database that commits continuously. At 1.92 TB the absolute number is large enough that most tiers never approach it, but the rating is still 1 DWPD, and a workload that writes a full drive every day for five years is a 3 DWPD workload regardless of capacity.
For those, the PM897 is the same 2.5-inch SATA footprint at 3 DWPD. Mixing the two in one chassis is normal: PM897 for the write-heavy tier, PM893 for the read-mostly tiers and the boot pair.
| Product family | Samsung PM893 (V-NAND SSD, data center / server) |
|---|---|
| PN | MZ-7L31T900 (catalogue code) |
| Ordering codes | MZ7L31T9HBLT-00W07, MZ7L31T9HBLT-00A07, MZ7L31T9HBLT-00B7C |
| Capacity | 1.92 TB (1,920 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung in-house controller, DRAM cache with LPDDR4 |
| NAND | Samsung V-NAND TLC |
| Sequential read / write | 550 MB/s / 520 MB/s |
| Random 4 KB (QD32) | 98K IOPS read / 30K IOPS write |
| Endurance | 3,504 TBW — 1 DWPD over a 5-year rating period |
| Power | Idle 1.5 W (DIPM off); active average 2.2 W read / 3.2 W write |
| Power-loss protection | Yes, PLP capacitors |
| Data security | AES 256-bit full-disk encryption, TCG Opal 2.0, IEEE 1667 |
| Features | TRIM, garbage collection, S.M.A.R.T. |
| Reliability | MTBF 2.0 million hours; operating 0 °C to 70 °C; non-operating -40 °C to 85 °C; 5–95% RH non-condensing |
| Shock / vibration | 1,500 G at 0.5 ms non-operating; 20–2,000 Hz at 20 G non-operating |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ-7L31T900 | Catalogue code | New / used | Enquire |
| MZ7L31T9HBLT-00W07 | Standard code | New / used | Enquire |
| MZ7L31T9HBLT-00A07 | Channel code | New / used | Enquire |
| MZ7L31T9HBLT-00B7C | Channel code | New / used | Enquire |
All four are the same 1.92 TB drive, stocked in both conditions. MZ-7L31T900 is what we catalogue and quote under; the three ordering codes are what a PO line, a BOM or a warranty claim is usually written against, with -00W07 the standard code. The middle block changes with capacity again at this point: HBLT here, HCJR at 960 GB, HCHQ at 480 and 240 GB. Copy the whole string rather than editing a neighbouring one.
| Model | Capacity | Sequential read / write | Random read / write | Endurance | Active power (read / write) |
|---|---|---|---|---|---|
| PM893 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 30K IOPS | 3,504 TBW (1 DWPD) | 2.2 / 3.2 W |
| PM893 240 GB | 240 GB | 550 / 380 MB/s | 98K / 15K IOPS | 438 TBW (1 DWPD) | 2.1 / 2.7 W |
| PM893 480 GB | 480 GB | 550 / 520 MB/s | 98K / 29K IOPS | 876 TBW (1 DWPD) | 2.1 / 3.2 W |
| PM893 960 GB | 960 GB | 550 / 520 MB/s | 98K / 30K IOPS | 1,752 TBW (1 DWPD) | 2.2 / 3.2 W |
| PM893 3.84 TB | 3.84 TB | 550 / 520 MB/s | 98K / 30K IOPS | 7,008 TBW (1 DWPD) | 2.2 / 3.2 W |
| PM893 7.68 TB | 7.68 TB | 550 / 520 MB/s | 98K / 30K IOPS | 14,016 TBW (1 DWPD) | 2.2 / 3.2 W |
Samsung PM893 3.84 TB and 7.68 TB are the same drive at double and quadruple the endurance: 7,008 and 14,016 TBW, same 550/520 MB/s and 98K/30K IOPS. Where density per bay is the constraint, they win outright; where the pool is fixed by the chassis, 1.92 TB is the cheaper way to the same raw capacity.
PM897 shares the footprint at 3 DWPD against 1 DWPD. That is a workload decision, not an upgrade: measuring the write rate of the tier decides it, and the answer is usually that a read-mostly pool is already covered by this part.
Any 2.5-inch 7 mm hot-swap bay on a SATA controller accepts it, and SAS backplanes work where the expander accepts SATA targets. At this capacity the drive is usually part of a set rather than a pair:
If the node only needs a system disk, the smaller capacities do that job for less. This one is for the chassis that has to hold a pool, and where the per-bay density matters more than the per-drive price.
Every drive carries a 1-year warranty against defects in workmanship and function; verified faulty units are replaced or refunded and we cover return shipping. New and used stock are held separately, the condition you order is confirmed before dispatch, and used units are tested pulls rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days; tracking is issued at dispatch.
The figure shown above is the starting point; the final number moves with condition and quantity, which is why the quote is per order. Send the quantity, the condition, the server model and the ordering code as it appears on your paperwork. For a pool build, tell us the chassis and the raw capacity you need and we will quote a matched set from one batch so the drives in a set share firmware generation.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV