Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK600MBP · Micron

Micron M510DC 600GB SATA SSD (MTFDDAK600MBP)

600 GB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK600MBP-1AN1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK600MBP
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 600 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type MLC
Endurance (DWPD) 3.5
TBW 3,800 TB
Sequential Read 420 MB/s
Sequential Write 380 MB/s
Random Read IOPS 65K IOPS
Random Write IOPS 40K IOPS
Power 6.3 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK600MBP and the ordering code is MTFDDAK600MBP-1AN1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 600 is the capacity, MBP is the family block, and the suffix after the hyphen is the configuration string. That suffix is identical on all six capacities of this range.

Because Micron assigns endurance by capacity group rather than scaling it with bytes. This drive is rated at 3.5 drive writes a day, which gives 3,800 TBW; the 800 GB member is rated 1.7 and the 960 GB member 1.0, giving 2,500 and 1,140 TBW. So the largest capacity in the range carries the second-smallest write budget, and the 600 GB part carries 3.3 times as much as the 960 GB part on 63% of its bytes.

Yes. The M510DC range publishes 12K, 18K, 23K, 40K, 30K and 10.5K random write across 120, 240, 480, 600, 800 and 960 GB, so this capacity is the peak and the 960 GB member is the low point. Sequential read and write do not vary with capacity in the same way - both stay at 420/380 MB/s from 480 GB upward.

Micron publishes 1.0 ms typical write latency for this density, against 2.0 ms for the 120, 240 and 480 GB members and 3.0 ms for the 960 GB member. For a synchronous write path - a database commit, a journal flush, a metadata update that waits on the drive - that difference reaches the application directly, which is why a 600 GB drive can feel quicker than a 960 GB one with identical sequential figures.

TCG Enterprise 1.0, not Opal 2.0. That scheme needs a controller, HBA or software stack that speaks it, and a consumer desktop BIOS will not manage the drive. A used drive may also arrive locked to a previous owner keys, so we query the security state before shipping. Ask for it explicitly if your platform uses enterprise key management.

It is one of two capacities in this range that are neither a power of two nor a quarter-step from one, the other being 800 GB. Both exist because some platforms are specified in raw decimal capacity and some OEM configurations were qualified against them, and each carries its own endurance rating rather than following the pattern of the round capacities. Substituting a 480 or a 960 GB drive changes the write budget by a factor of two.

Micron M510DC 600 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK600MBP, ordering code MTFDDAK600MBP-1AN1ZABYY. 420 MB/s sequential read, 380 MB/s sequential write, 65K random read and 40K random write IOPS at 4 KB, 3,800 TBW on Micron 16nm MLC NAND, with a data-protection capacitor, TCG Enterprise self-encryption and end-to-end data path protection. Stocked new or as tested pulls with a 1-year warranty from us.

This capacity holds three of the M510DC range's best numbers at once. 3,800 TBW is the largest write budget Micron publishes for any M510DC, 40K random write is the highest random-write figure in the family, and 1.0 ms is the lowest write latency — against 2.0 ms on the 120, 240 and 480 GB members and 3.0 ms on the 960 GB member. It reaches all three on 25% more bytes than the 480 GB part, which carries 1,850 TB and 23K instead.

Why 600 GB carries the largest write budget in the range

The M510DC range does not scale endurance with bytes. Micron publishes six capacities and three distinct endurance rules: 120, 240 and 480 GB at two drive fills a day, 600 GB at 3.5, and 800 and 960 GB at 1.7 and 1.0. The published TBW figures follow that table rather than the capacity axis — 460, 920, 1,850, 3,800, 2,500 and 1,140 TB — so the curve rises to 600 GB and then falls, and the largest capacity in the range carries the second-smallest write budget.

That makes the 600 GB part a specific tool rather than a middle option. It carries 2.1 times the write budget of the 480 GB drive on 25% more bytes, 4.1 times the 240 GB budget on 2.5 times the capacity, and 3.3 times the 960 GB budget on 63% of its bytes. Where a design is capped by endurance — a write-heavy cache, a local journal, a container image store that is rebuilt nightly — this is the capacity that buys the most writes per device without going to a mixed-use part.

The trade is bandwidth, not endurance. Sequential write stays at 380 MB/s, the same as the 480 and 960 GB members and only 31% above the 240 GB part, so a workload limited by streaming write speed gains nothing here over the cheaper 480 GB drive. What the 600 GB part adds is the ability to absorb a queue: 40K random write is 74% above the 480 GB member's 23K and 2.2 times the 240 GB member's 18K.

Technical specifications

Product familyMicron M510DC (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK600MBP (catalogue code)
Ordering codeMTFDDAK600MBP-1AN1ZABYY
Capacity600 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (69.85 × 100.45 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS2, hot-plug capable, NCQ to depth 32
NANDMicron 16nm MLC NAND
Sequential read / write420 MB/s / 380 MB/s (128 KB, steady state)
Random 4 KB (QD32)65K IOPS read / 40K IOPS write
Latency0.50 ms read / 1.0 ms write (typical) — the lowest write latency in this range
Endurance3,800 TBW — 3.5 DWPD over five years
TBW basis55 °C case temperature, drive 100% full, 100% random aligned 4 KB writes
PowerIdle 1.2 W; sequential write max 6.3 W; sequential read max under 6.3 W; active average 1.5 W
Rated input5 V ±10% at the connector, sized for backplane supply rather than measured draw
Power-loss protectionYes — data-protection capacitor, with capacitor monitoring reported by firmware
Data securityTCG Enterprise 1.0 SED (self-encrypting drive); AES encryption engine
DRAM cacheYes — on-board DDR3 DRAM
FeaturesXPERT feature set: data path protection, adaptive thermal monitoring, power-loss protection; static and dynamic wear levelling; end-to-end data protection
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1016 bits read
EnvironmentalOperating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing; operating shock 1500G/0.5 ms; vibration 10–500 Hz at 3.1G

What 3.5 drive writes a day means in practice

3,800 TB over five years is 2,082 GB of writes every day — three and a half fills of a 600 GB drive, every day, for 1,825 days. Written flat out at 380 MB/s the rating would last about 116 days, which is the longest such figure in the family and still a fraction of the five years it covers. The basis is a 55 °C case, a drive held 100% full and 100% random aligned 4 KB writes.

The daily allowance is the number to plan against. A 600 GB volume that rewrites its whole working set once a day uses 600 GB, or 29% of the allowance; twice a day uses 58%; three times a day leaves 14% of margin. Above three fills a day the drive is running inside its rating but close to it, and the next step is a mixed-use part with 3.0 to 3.5 DWPD at a lower capacity rather than a larger read-intensive drive, because in this family the larger read-intensive drives carry less endurance, not more.

Write latency is the less obvious gain. At 1.0 ms typical this capacity is half the 2.0 ms of the 120, 240 and 480 GB members and a third of the 960 GB member's 3.0 ms. For a synchronous write path — a database commit, a journal flush, a metadata update that waits for the drive — that difference shows up directly in application latency, and it is the reason a 600 GB drive can feel faster than a 960 GB one with identical sequential figures.

Ordering codes and the two non-standard capacities

CodeTypeConditionQuote
MTFDDAK600MBPCatalogue codeNew / usedEnquire
MTFDDAK600MBP-1AN1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 600 is the capacity in gigabytes, MBP is the family and form-factor block, and everything after the hyphen is the configuration string Micron assigns at order entry. That suffix, -1AN1ZABYY, is the same on all six capacities, so the three digits in the middle are the only thing separating a 600 GB pallet from a 480 or a 960.

600 and 800 GB are the two capacities in this range that are neither a power of two nor a quarter-step from one. They exist because some platforms are specified in raw decimal capacity and some OEM configurations were qualified against them, and both carry their own endurance rating rather than fitting the pattern of the four round numbers. If a bill of materials names 600 GB, this is the part; substituting a 480 or a 960 changes the write budget by a factor of two in either direction.

Where 600 GB sits between 480 GB and 800 GB

Three capacities bracket this one and each is worse at something. The 480 GB member carries 1,850 TB and 23K random write on 20% fewer bytes; the 800 GB member carries 2,500 TB and 30K on 33% more bytes; the 960 GB member carries 1,140 TB and 10.5K on 60% more bytes. None of the three matches this drive on endurance, random write or write latency, and only the 800 GB part comes close on the first two.

So the decision is a narrow one. If 600 GB of usable space is what the application needs and the write profile is steady, this drive is the strongest read-intensive SATA part Micron built on this platform, and nothing above it in the range is a step up. If the requirement is space rather than writes, the 800 GB member gives 33% more capacity for 34% less write budget, and the trade is a straightforward one to price. If the requirement is writes per dollar at the smallest capacity that works, the 240 GB member starts the ladder and the 120 GB member below it covers the boot-only case.

How the M510DC 600 GB compares across the SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEnduranceClass
Micron M510DC 600 GB600 GB420 / 380 MB/s65K / 40K IOPS3,800 TB (3.5 DWPD)Read-intensive, 16nm MLC
Micron M510DC 800 GB800 GB420 / 380 MB/s65K / 30K IOPS2,500 TB (1.7 DWPD)Same family, larger capacity
Micron M510DC 480 GB480 GB420 / 380 MB/s63K / 23K IOPS1,850 TB (2.1 DWPD)Same family
Micron M510DC 240 GB240 GB420 / 290 MB/s63K / 18K IOPS920 TB (2.1 DWPD)Same family, half capacity
Samsung SM863a 480 GB480 GB510 / 485 MB/s95K / 19K IOPS3,080 TB (3.5 DWPD)Mixed-use, MLC
Samsung SM883 480 GB480 GB540 / 520 MB/s97K / 27K IOPS2,628 TB (3.0 DWPD)Mixed-use, MLC
Samsung PM893 480 GB480 GB550 / 520 MB/s98K / 29K IOPS876 TB (1.0 DWPD)Read-intensive, TLC

The four M510DC rows make the family argument: endurance peaks at this capacity and falls away in both directions, while sequential read and write stay flat at 420/380 except at the 240 GB step. The three Samsung rows are the comparison at a neighbouring capacity, and they separate cleanly — both mixed-use MLC parts write sequentially 28% to 37% faster and serve 40% to 50% more random reads, but neither matches this drive on random write, and the read-intensive PM893 carries less than a quarter of its write budget.

What that leaves is a narrow but real case: a 600 GB volume that queues writes and must last five years. At 40K random write this drive absorbs more concurrent small writes than any other part on the page, and at 3,800 TB it carries more budget than the two mixed-use MLC drives at 3,080 and 2,628 TB. The trade for that is 130 to 140 MB/s of sequential write and 30 to 33K of random read, which is the price of buying endurance on MLC rather than throughput on TLC.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch. Send the quantity, the condition you need and the platform the drives are going into, and you will get a quote with lead time the same working day. If the host uses TCG Enterprise key management, say so when you enquire and we will confirm the drive's security state before it ships; matched sets for a mirror or a parity group are selected from a single batch where stock allows, including firmware revision and wear level.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View