Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK960TCC · Micron

Micron 5100 MAX 960GB SATA SSD (MTFDDAK960TCC)

960 GB 2.5-inch SATA write-intensive SSD, ordering code MTFDDAK960TCC-1AR1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK960TCC
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 960 GB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 5
TBW 8,800 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 93K IOPS
Random Write IOPS 74K IOPS
Power 5 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK960TCC and the ordering code is MTFDDAK960TCC-1AR1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 960 is the capacity, and TCC is the MAX tier block, which differs from the PRO and ECO blocks at the same capacity. The suffix after the hyphen is assigned per SKU.

It is the first capacity in the tier where both write curves are at their best. Sequential write reaches 520 MB/s, the interface ceiling, instead of 310 or 460, while random write holds at 74K rather than falling away. The 240 GB and 480 GB members trade one against the other because of die count; this one does not.

Both quote 540/520 MB/s, 93K random read and 5 W. The MAX carries 8,800 TBW at 5.0 drive writes a day against 4,400 TB at 2.5, and serves 74K random write against 37K. Nothing in the read path or the sequential path differs, so the tier buys write endurance and small-block write and nothing else.

8,800 TB over five years is 4,822 GB a day. A cache turning over its full 960 GB four times a day uses 80% of that allowance and a log volume writing 1 TB a day uses 21%, so both sit inside the rating for five years. The same duty cycles would put a read-intensive drive far past its rating at this capacity.

Yes, FIPS 140-2 validation, on top of the AES 256-bit encryption and TCG Enterprise 1.0 self-encryption carried by all three tiers. The TCC block identifies a validated unit, and the validation mode can be queried on the drive before it ships.

Both. A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops, and the drive is a TCG Enterprise 1.0 self-encrypting unit with AES 256-bit encryption and FIPS 140-2 validation. TCG Enterprise is not the same as consumer TCG Opal 2.0 and needs a controller or key-management stack that speaks it.

Micron 5100 MAX 960 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK960TCC, ordering code MTFDDAK960TCC-1AR1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 74K random write IOPS at 4 KB, 8,800 TBW — five drive writes a day for five years — on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption, FIPS 140-2 validation and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

This is the capacity where the write-intensive tier stops giving anything up. Sequential write reaches 520 MB/s, the ceiling of the interface and the same figure the PRO and ECO drives at this size quote, while random write holds at 74K — the small-block performance does not fall away as the capacity doubles. The budget doubles with the bytes to 8,800 TBW for half a watt more, and the endurance class stays at five drive writes a day.

Where 960 GB catches up on streaming without losing small blocks

The tier has two curves and this capacity is the point where they stop fighting. Random write climbs from 48K at 240 GB to 74K at 480 GB and holds at 74K here, because the spare area and the die count are both large enough to keep the controller's four channels busy on small blocks. Sequential write, which was pinned at 310 MB/s at 240 GB and 460 at 480 GB by the die count, finally reaches 520 MB/s — the interface limit, and a figure that no larger capacity on this platform improves on.

That combination is unusual in a single drive. On the mixed-use and read-intensive tiers at this capacity you can have 520 MB/s sequential write with 37K or 28K random write, or you can have a high random write with a smaller budget. Here the streaming figure is at its ceiling and the small-block figure is at the top of the table, which is what a write-intensive volume with a bulk ingest path actually needs.

Read performance is unchanged from the smaller members: 540 MB/s sequential and 93K random, identical to the PRO and ECO drives at 960 GB. So the extra endurance is not paid for in read latency or in power beyond half a watt.

Technical specifications

Product familyMicron 5100 MAX (SATA NAND Flash SSD, write-intensive data centre)
PNMTFDDAK960TCC (catalogue code)
Ordering codeMTFDDAK960TCC-1AR1ZABYY
Capacity960 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 3D enterprise TLC (eTLC), 32-layer
Sequential read / write540 MB/s / 520 MB/s (128 KB, steady state)
Random 4 KB (QD32)93K IOPS read / 74K IOPS write
Mixed 70/30 4 KB72K IOPS
Quality of service500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999%
Endurance8,800 TBW — 5.0 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
PowerTypical 5 W; idle 2.5 W; supply 5 V at the connector
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise 1.0 SED, FIPS 140-2 validated
DRAM cacheYes, LPDDR3
FeaturesEnd-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

What 8,800 TBW means at 960 GB

8,800 TB over five years is 4,822 GB of writes every day, five full fills of the drive. Written flat out at 520 MB/s the whole allowance would last about 196 days; the rating assumes that daily allowance spread across 1,825 days. A write cache turning over its full capacity four times a day uses 80% of the allowance, and a log volume writing 1 TB a day uses 21% — both are realistic duty cycles for this tier, and both would run a read-intensive drive far past its rating.

Against the PRO drive at this capacity the step is exactly a doubling of the budget with no change in speed. The 5100 PRO 960 GB carries 4,400 TBW at 2.5 drive writes a day, quotes the same 540/520 MB/s and draws the same 5 W; it serves 37K random write against 74K here. Nothing about the read path or the sequential path differs, so the entire price of the tier sits in the write queue.

Against the older MLC platform at this capacity, the M510DC 960 GB carries 1,140 TBW at 0.65 drive writes a day, writes at 380 MB/s and serves 10.5K random write at 6.3 W. This drive is 7.7 times its budget, 1.4 times its sequential write and seven times its random write, at 1.3 W less.

Ordering codes and the tier block

CodeTypeConditionQuote
MTFDDAK960TCCCatalogue codeNew / usedEnquire
MTFDDAK960TCC-1AR1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 960 is the capacity, and the block after it identifies the tier and the interface. TCC is the MAX block, the only one of the three carrying FIPS 140-2 validation alongside TCG Enterprise. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU.

At this capacity the tier block is the difference between 900 TB and 8,800 TB of rated life on drives that look identical: same case, same label family, same 540/520 MB/s, same 5 W. A mixed pallet of 960 GB drives from this platform is worth sorting by the block before anything else is read on the label.

How it compares across the 960 GB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 MAX 960 GB960 GB540 / 520 MB/s93K / 74K IOPS8,800 TB (5.0 DWPD)5 WWrite-intensive, 3D eTLC
Micron 5100 MAX 480 GB480 GB540 / 460 MB/s93K / 74K IOPS4,400 TB (5.0 DWPD)4.5 WSame tier, half capacity
Micron 5100 PRO 960 GB960 GB540 / 520 MB/s93K / 37K IOPS4,400 TB (2.5 DWPD)5 WMixed-use, 3D eTLC
Micron 5100 ECO 960 GB960 GB540 / 520 MB/s93K / 28K IOPS900 TB (0.51 DWPD)5 WRead-intensive, 3D eTLC
Micron M510DC 960 GB960 GB420 / 380 MB/s65K / 10.5K IOPS1,140 TB (0.65 DWPD)6.3 WMixed-use, 16nm MLC
Samsung PM897a 960 GB960 GB560 / 530 MB/s97K / 60K IOPS5,256 TB (3.0 DWPD)2.3 WMixed-use, TLC
Samsung SM883 960 GB960 GB540 / 520 MB/s97K / 29K IOPS5,256 TB (3.0 DWPD)2.8 WMixed-use, MLC

Read straight across. This drive is first of seven on write budget at 8,800 TB, first on endurance class at 5.0 and first on random write at 74K, tied with the 480 GB member of its own tier and ahead of every other row. It is level with three other rows at 520 MB/s sequential write, level with four other rows on sequential read at 540, level with the MAX 480, PRO and ECO rows on random read at 93K behind the two 97K rows, and level with the PRO and ECO rows on power at 5 W.

Note what that leaves out. Against the Samsung mixed-use row it gives up 20 MB/s of sequential read, 10 MB/s of sequential write and 2.7 W of power, and takes back 3,544 TB of budget and a 14K lead on random write. Where a build is qualified on one platform and writes hard, this is the drive that removes the endurance question from the design; where it is not, the power figure is what to weigh.

The MAX ladder from 240 GB to here

The tier has three capacities on this site and each one is a different drive rather than a bigger version of the last. At 240 GB the MAX member there carries 2,200 TBW and 48K random write at 310 MB/s, limited by die count on the streaming side. At 480 GB it reaches 4,400 TB and 74K at 460 MB/s. Here it reaches 8,800 TB and keeps 74K while the streaming figure finally hits 520 MB/s.

So the ladder is a sequence of problems being solved. 240 GB is for a boot pair or a small journal where endurance per byte matters more than throughput. 480 GB is for a write cache where the random queue is the whole workload. 960 GB is for a volume that has to do both — ingest a stream and absorb a queue — without giving up either, and it is the smallest capacity in the tier where that is true.

Above this capacity the tier keeps the 5.0 rating and adds bytes and budget, but random write eases to 66K at 1.92 TB, so the 960 GB drive is the last one that holds the 74K figure. Where the capacity requirement is 1.92 TB or more, that is the trade to accept; where 960 GB is enough, this is the drive that has both curves at their best.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 960 GB a MAX drive is bought for its write life, so the percentage-used counter and total LBAs written are the first two figures to ask about on any used unit. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View