Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK1T9TBY · Micron

Micron 5100 ECO 1.92TB SATA SSD (MTFDDAK1T9TBY)

1.92 TB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK1T9TBY-1AR1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK1T9TBY
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 1.92 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 0.9
TBW 3,200 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 93K IOPS
Random Write IOPS 24K IOPS
Power 5.5 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK1T9TBY and the ordering code is MTFDDAK1T9TBY-1AR1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 1T9 is the capacity block for 1.92 TB, and the block after it identifies the family and endurance tier. The suffix after the hyphen is assigned per SKU.

Because the family uses three endurance classes rather than a single rating per byte. 480 GB and 960 GB are rated 0.5 drive writes a day, 1.92 TB and 3.84 TB are rated 0.9, and 7.68 TB returns to 0.6. The TBW curve therefore rises from 450 to 900 to 3,200 to 6,400 TB and then steps up only 31% to 8,400 TB at the top capacity, which carries 2.6 times this drive budget on four times the bytes.

That drive carries 10,512 TBW at 3.0 drive writes a day against 3,200 TBW at 0.9 here, so it has 3.3 times the write budget. Everything else favours this drive: 540/520 MB/s against 420/380, 93K random read against 65K, and 5.5 W against 6.3 W. Choose the MLC part when the volume is rewritten daily; choose this one when it is read and cached.

Yes, and it is the best-balanced capacity in the ECO range for one. 1,753 GB of writes a day covers a cache, an image repository or a published dataset with room to spare, 520 MB/s sequential write keeps restores and bulk loads quick, and 500 us write latency keeps a small-block queue responsive. The one thing it does not offer is endurance beyond 0.9 drive writes a day.

Three endurance tiers of the same 5100 platform, sharing capacities, the 7 mm case and the SATA interface but not the write budget. ECO is the read-intensive tier; PRO and MAX sit above it by a multiple, with MAX reaching roughly five drive writes a day at some capacities. A quote written against a generic 5100 1.92TB does not identify which of the three it means.

Both. A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops, and the drive is a TCG Enterprise 1.0 self-encrypting unit with AES 256-bit encryption. TCG Enterprise is not the same as consumer TCG Opal 2.0 and needs a controller or key-management stack that speaks it, so confirm the host supports the scheme first.

Micron 5100 ECO 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK1T9TBY, ordering code MTFDDAK1T9TBY-1AR1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 24K random write IOPS at 4 KB, 3,200 TBW on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

Endurance in the 5100 ECO family does not climb smoothly, and this capacity is where it steps. The 960 GB member is rated half a drive write a day at 900 TBW; from 1.92 TB the class changes to 0.9 drive writes a day and the budget nearly quadruples to 3,200 TBW, on twice the bytes. The 3.84 TB member below that step keeps the same 0.9 rating, and the 7.68 TB member drops back to 0.6 — so this is one of the two capacities in the range where the endurance per byte is strongest.

Why 1.92 TB is the endurance step in the ECO family

Three endurance classes sit inside one family. The 480 GB and 960 GB members are rated 0.5 drive writes a day, 1.92 TB and 3.84 TB are rated 0.9, and 7.68 TB returns to 0.6. That produces a TBW curve which rises steeply, holds through the middle, and then flattens at the top: 450, 900, 3,200, 6,400 and 8,400 TB. The largest capacity in the family carries 2.6 times the budget of this one on four times the bytes.

The performance columns behave differently. Sequential read is 540 MB/s and sequential write 520 MB/s from 960 GB upward, random read is 93K at every capacity, and random write falls as capacity rises: 31K at 480 GB, 28K at 960 GB, 24K here and 18K at 3.84 TB. So moving up from this capacity buys space and endurance rather than throughput, and the small-block write figure is the one that gives ground.

What that means in practice is that the step from 960 GB to this capacity is the most favourable in the range for a write-bearing read tier. Bytes double, write budget increases 3.6 times, the endurance class nearly doubles, sequential throughput is unchanged and random write gives up 14%. Above this capacity the same money buys space at the same class until 3.84 TB, and after that it buys space at a lower class.

Technical specifications

Product familyMicron 5100 ECO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK1T9TBY (catalogue code)
Ordering codeMTFDDAK1T9TBY-1AR1ZABYY
Capacity1.92 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 3D enterprise TLC (eTLC)
Sequential read / write540 MB/s / 520 MB/s (128 KB, steady state)
Random 4 KB (QD32)93K IOPS read / 24K IOPS write
Quality of service500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999%
Endurance3,200 TBW — 0.9 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
PowerTypical 5.5 W; supply 5 V at the connector
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise 1.0 SED
DRAM cacheYes
FeaturesEnd-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

What 3,200 TBW buys at 1.92 TB

3,200 TB over five years is 1,753 GB of writes every day, just under one full fill of the drive. Written flat out at 520 MB/s the rating would last about 71 days; the rating assumes that daily allowance spread across 1,825 days rather than a drive run at its ceiling. A volume that rewrites half its content daily uses 960 GB, or 55% of the allowance, which leaves room for a second copy during a migration or a rebuild.

The comparison that decides most purchases is with the same-capacity MLC part from the older platform. The M510DC platform at its 1.92 TB capacity carries 10,512 TBW at 3.0 drive writes a day, more than three times this budget, but it reads at 420 MB/s and 65K random read against 540 and 93K here, and its random write figure of 60K is bought with an MLC array that costs more per device. This drive is the throughput-and-efficiency choice at 1.92 TB; the MLC part is the endurance choice.

Against the read-intensive SATA drives from other vendors at this capacity, the position is close to the middle. The PM893 at 1.92 TB carries 3,504 TBW at 1.0 drive write a day, 9% more budget on the same bytes, and quotes 550/520 MB/s with 98K/30K IOPS. So this drive is not the endurance leader at 1.92 TB either — what it holds is a 500 µs write latency floor and a 5.5 W power figure, which matter in dense chassis rather than in benchmarks.

Ordering codes and the ECO tier

CodeTypeConditionQuote
MTFDDAK1T9TBYCatalogue codeNew / usedEnquire
MTFDDAK1T9TBY-1AR1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 1T9 is the capacity block that stands for 1.92 TB, and the block after it identifies the family and endurance tier. Everything after the hyphen is the configuration string Micron assigns at order entry, and the suffix -1AR1ZABYY is assigned per SKU rather than per capacity.

The capacity block is the field to read at goods-in, because it is the only one that separates 1T9 from the neighbouring 960 GB and 3T8 parts, both of which are the same case, the same interface and — in the case of 3T8 — the same endurance class. The ECO, PRO and MAX tiers share all of that as well and differ by a multiple in write budget, so a purchase order written against a generic "5100 1.92TB" does not identify what should arrive.

How it compares across the 1.92 TB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEnduranceClass
Micron 5100 ECO 1.92 TB1.92 TB540 / 520 MB/s93K / 24K IOPS3,200 TB (0.9 DWPD)Read-intensive, 3D eTLC
Micron 5100 ECO 960 GB960 GB540 / 520 MB/s93K / 28K IOPS900 TB (0.51 DWPD)Same family, half capacity
Micron M510DC 960 GB960 GB420 / 380 MB/s65K / 10.5K IOPS1,140 TB (0.65 DWPD)Read-intensive, 16nm MLC
Samsung SM883 1.92 TB1.92 TB540 / 520 MB/s97K / 29K IOPS10,512 TB (3.0 DWPD)Mixed-use, MLC
Samsung PM893 1.92 TB1.92 TB550 / 520 MB/s98K / 30K IOPS3,504 TB (1.0 DWPD)Read-intensive, TLC
Samsung PM883 1.92 TB1.92 TB550 / 520 MB/s98K / 25K IOPS2,733 TB (0.78 DWPD)Read-intensive, TLC
Samsung PM863a 1.92 TB1.92 TB520 / 480 MB/s97K / 24K IOPS2,733 TB (0.78 DWPD)Read-intensive, TLC

Across the four 1.92 TB rows this drive sits second on endurance, behind the mixed-use MLC part at 10,512 TB and narrowly behind the PM893 at 3,504, and fifth on random read at 93K, level with its own 960 GB member and behind the 97K to 98K the others quote. It matches the PM893 and PM883 on sequential write at 520 MB/s, and its 500 µs typical write latency sits well below the 2.0 to 3.0 ms the MLC parts at this capacity carry. It is a middling table on paper and a strong one on the two figures that do not appear in it: 500 µs write latency and 5.5 W typical power.

Which of the three Micron capacities to buy

The first three rows are the useful decision. Against the 960 GB member, doubling the bytes triples the write budget and adds nothing to throughput. Against the M510DC at 960 GB, this drive wins every performance line and carries 2.8 times the write budget on twice the bytes, 3,200 TB against 1,140, so the comparison does not need a per-byte adjustment to favour this side.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 1.92 TB the difference between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View