Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK7T6TBY · Micron

Micron 5100 ECO 7.68TB SATA SSD (MTFDDAK7T6TBY)

7.68 TB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK7T6TBY-1AR1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK7T6TBY
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 7.68 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 0.6
TBW 8,400 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 93K IOPS
Random Write IOPS 9K IOPS
Power 6 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

The catalogue code is MTFDDAK7T6TBY and the ordering code is MTFDDAK7T6TBY-1AR1ZABYY. MTFDDAK is the prefix for Micron SATA solid-state drives in the 2.5-inch 7 mm form factor, 7T6 is the capacity block for 7.68 TB, and the block after it identifies the family and endurance tier. The suffix after the hyphen is assigned per SKU.

It is the lowest class above 1 TB, not the lowest figure in the family. 480 GB and 960 GB are rated 0.5 drive writes a day, 1.92 TB and 3.84 TB are rated 0.9, and this capacity is rated 0.6, so it sits between the two. It is the only capacity in the upper range where the class falls as capacity rises, which is why it carries 8,400 TBW rather than the 12,600 TB a 0.9 rating would give at these bytes.

Because the endurance class changes at this step. The 3.84 TB member is rated 0.9 drive writes a day and the 7.68 TB member is rated 0.6, so doubling the bytes multiplies the budget by 1.31 rather than 2. The 8,400 TBW figure is still the largest absolute budget in the range, 2.6 times the 1.92 TB member and more than nine times the 960 GB member.

The PM893 carries 14,016 TBW at 1.0 drive write a day, quotes 550/520 MB/s with 98K/30K IOPS and draws 3.2 W typical, so it is ahead on every performance and endurance line. This drive runs 540/520 with 93K/9K at 6 W. The case for it is the ECO platform, firmware line and qualification, plus the 500 us latency floor, rather than raw specification.

A full rewrite at 520 MB/s takes about four hours, and for those hours a mirror is unprotected or a parity set runs degraded with double read load on every survivor. At this capacity a rebuild is normally absorbed by a wide parity group rather than a pair, and the 3.84 TB member, at about two hours, is the safer device where the maintenance window is tight.

Both. A data-protection capacitor with firmware monitoring holds the drive up long enough to commit acknowledged writes when power drops, and the drive is a TCG Enterprise 1.0 self-encrypting unit with AES 256-bit encryption. TCG Enterprise is not the same as consumer TCG Opal 2.0 and needs a controller or key-management stack that speaks it.

Micron 5100 ECO 7.68 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK7T6TBY, ordering code MTFDDAK7T6TBY-1AR1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 9K random write IOPS at 4 KB, 8,400 TBW on Micron 3D enterprise TLC, with 500 µs read and write latency at the 99.9th percentile, TCG Enterprise self-encryption and capacitor-backed power-loss protection. Stocked new or as tested pulls with a 1-year warranty from us.

This is the largest capacity the 5100 ECO range offers, and the only one where the endurance class falls as capacity rises. Below it the 3.84 TB member is rated 0.9 drive writes a day and carries 6,400 TBW on half the bytes; this one carries 8,400 TBW on twice the bytes, 31% more budget for 100% more capacity. That single step is the whole character of the drive: it buys density and gives back endurance ratio, and it does so while holding the same 6 W typical power as the 3.84 TB part.

Why the largest capacity carries the lowest endurance class above 1 TB

The range divides into three classes. 480 GB and 960 GB are rated 0.5 drive writes a day, 1.92 TB and 3.84 TB are rated 0.9, and 7.68 TB drops back to 0.6. The TBW column follows that shape rather than the byte count: 450, 900, 3,200, 6,400 and 8,400 TB. So the biggest drive in the family does not carry the biggest endurance ratio, and a buyer who assumes the top capacity is the top specification gets the one part in the upper range that is rated below its neighbour.

What it does carry is absolute budget. 8,400 TB is 31% more than the 3.84 TB part, 2.6 times the 1.92 TB part and more than nine times the 960 GB part. For a volume that needs the bytes and writes within half a drive a day, the budget is sufficient by a wide margin even though the ratio is the lowest in the upper half of the range.

The performance profile follows the same logic. Sequential read and write hold at 540/520 MB/s, exactly as they do from 960 GB upward, and random read holds at 93K. Random write does not: it falls at every step from the small end, 31K at 480 GB, 28K at 960 GB, 24K at 1.92 TB, 18K at 3.84 TB and 9K here. On a read tier that fills the drive once and serves it for years that column never binds, but on a tier that ingests continuously it is the first number to check.

Technical specifications

Product familyMicron 5100 ECO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK7T6TBY (catalogue code)
Ordering codeMTFDDAK7T6TBY-1AR1ZABYY
Capacity7.68 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 3D enterprise TLC (eTLC)
Sequential read / write540 MB/s / 520 MB/s (128 KB, steady state)
Random 4 KB (QD32)93K IOPS read / 9K IOPS write
Quality of service500 µs read / 500 µs write at the 99.9th percentile; 9 ms / 5 ms at 99.999%
Endurance8,400 TBW — 0.6 DWPD over five years
TBW basisDrive held full under a random write workload over the five-year rating period
PowerTypical 6 W; supply 5 V at the connector
Power-loss protectionYes — data-protection capacitor with capacitor monitoring reported by firmware
Data securityAES 256-bit encryption, TCG Enterprise 1.0 SED
DRAM cacheYes
FeaturesEnd-to-end data protection, static and dynamic wear levelling, S.M.A.R.T., secure and fast erase
ReliabilityMTTF 2.0 million device hours; UBER under 1 sector per 1017 bits read
EnvironmentalOperating 0 °C to 70 °C; non-operating shock 1500G at 0.5 ms; vibration 3.13G RMS at 5–800 Hz

What 8,400 TBW buys at 7.68 TB

8,400 TB over five years is 4,603 GB of writes every day, six tenths of a full fill of the drive. Written flat out at 520 MB/s the entire allowance would take about 187 days; the rating assumes that daily allowance spread across 1,825 days rather than a drive driven at its ceiling. A volume that rewrites a third of its content daily uses 2,560 GB, or 56% of the allowance, which still leaves headroom for a rebuild.

Against the same capacity in the Samsung read-intensive line the budget is not the top. The PM893 at 7.68 TB carries 14,016 TBW at 1.0 drive write a day and the PM883 at 7.68 TB carries 10,932 TB at 0.78, both above this drive. Where a build needs the write budget rather than the density, those are the parts to price against, and where the queue carries small-block writes the mixed-use MLC parts at smaller capacities are the better device even though they cost more per terabyte.

What this drive adds on top of the budget is a 500 µs latency floor in both directions and a power figure that does not move with capacity. Both matter in a shelf: the latency figure is a quarter of the 2.0 ms write latency the MLC platform quotes at the capacities it is built in, and 6 W typical is the same as the 3.84 TB member, so doubling the bytes does not add a single watt per drive.

Ordering codes and the capacity block

CodeTypeConditionQuote
MTFDDAK7T6TBYCatalogue codeNew / usedEnquire
MTFDDAK7T6TBY-1AR1ZABYYOrdering codeNew / usedEnquire

The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 7T6 is the capacity block that stands for 7.68 TB, and the block after it identifies the family and endurance tier. Everything after the hyphen is the configuration string assigned at order entry, and the suffix -1AR1ZABYY is assigned per SKU rather than per capacity.

At goods-in 7T6 is the field to read, and it is the block most easily confused with 3T8 on a label photographed at an angle, because the two drives share the case, the 540/520 MB/s sequential rating, the 93K random read and the same configuration suffix. The difference is 3.84 TB of capacity, 2,000 TB of write budget and one endurance class, and none of it announces itself on a shelf.

How it compares across the 7.68 TB SATA line

ModelCapacitySequential read / writeRandom 4K read / writeEnduranceClass
Micron 5100 ECO 7.68 TB7.68 TB540 / 520 MB/s93K / 9K IOPS8,400 TB (0.6 DWPD)Read-intensive, 3D eTLC
Samsung PM893 7.68 TB7.68 TB550 / 520 MB/s98K / 30K IOPS14,016 TB (1.0 DWPD)Read-intensive, TLC
Samsung PM883 7.68 TB7.68 TB550 / 520 MB/s98K / 27K IOPS10,932 TB (0.78 DWPD)Read-intensive, TLC
Micron 5100 ECO 3.84 TB3.84 TB540 / 520 MB/s93K / 18K IOPS6,400 TB (0.9 DWPD)Same family, half capacity
Micron 5100 ECO 1.92 TB1.92 TB540 / 520 MB/s93K / 24K IOPS3,200 TB (0.9 DWPD)Same family
Micron 5100 ECO 960 GB960 GB540 / 520 MB/s93K / 28K IOPS900 TB (0.51 DWPD)Same family
Micron 5100 ECO 480 GB480 GB540 / 380 MB/s93K / 31K IOPS450 TB (0.51 DWPD)Same family

Read the positions straight. This drive is third of seven on absolute write budget, fifth on endurance class, level with five other rows at 520 MB/s sequential write, tied with the other four ECO rows at 93K random read, and last on random write at 9K. Only the two Samsung rows at this capacity quote 98K read and 27K to 30K write, and both of them also carry a higher endurance class.

That makes the choice a question of which column binds rather than which drive is better. A capacity tier that stores media archives, published datasets or backup chains binds on bytes per bay and on sequential throughput, and this drive delivers 7.68 TB per 2.5-inch slot at full 520 MB/s write. A tier that ingests small blocks continuously binds on the 9K column, and there the 3.84 TB member at 18K or the MLC platform are the correct devices even though they cost more per terabyte.

Where 7.68 TB wins on watts per terabyte

Power is the one column where this capacity beats its own family rather than trailing it. The 3.84 TB member draws 6 W typical and the 7.68 TB member draws the same 6 W, so the figure per terabyte halves from 1.56 W to 0.78 W. Twenty-four of these in a 2U shelf give 184 TB of raw capacity at 144 W; the same shelf of 3.84 TB members gives 92 TB at the same 144 W. The cooling, the PSU sizing and the rack power budget stay flat while the usable bytes double.

The Samsung parts at this capacity draw less again, 3.2 W on the PM893, so on absolute watts this is not the most efficient drive on the page. The point is narrower and still worth having: within one platform, one firmware line and one qualification, the largest capacity adds no heat. A build that already runs ECO at smaller sizes can extend a tier to 7.68 TB without re-deriving its thermal envelope.

How each drive is tested before it ships

Warranty, lead time and purchasing

Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.

This capacity is quoted rather than listed, because price moves with condition, quantity and batch, and at 7.68 TB the spread between a low-hour pull and a high-hour one is worth asking about explicitly. Send the quantity, the condition you need, the platform the drives are going into and the tier your build specifies, and you will get a quote with lead time the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View