7.68 TB 2.5-inch SATA read-intensive SSD, ordering codes MZ7L37T6HELA-00A07 and -00B07
| Capacity | 7.68 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 14,016 TB |
| Sequential Read | 560 MB/s |
| Sequential Write | 530 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 31K IOPS |
| Power | 2.2 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM893a 7.68 TB, 2.5-inch 7 mm SATA, catalogue code MZ7L37T6HELA, supplied as -00A07 or -00B07. 560 MB/s sequential read, 530 MB/s sequential write, 97K random read and 31K random write IOPS, 14,016 TBW at 1.0 drive-writes-per-day over five years, with TCG Opal 2.0 as standard. Stocked new or as tested pulls with a 1-year warranty from us.
This is the largest capacity Samsung sells in the PM893a line, and it is the same drive as the rest of the family above 960 GB: 560/530 MB/s, 97K/31K IOPS, 40 µs write latency, 2.2 W active read. Nothing in the performance column changes between the 3.84 TB and this capacity. What doubles, again, is the write budget — 7,008 TB to 14,016 TB at an unchanged 1.0 DWPD.
What also doubles is the rebuild. A 7.68 TB mirror member written back at 530 MB/s takes about four hours before redundancy is restored — two hours more than the 3.84 TB and eight times the 960 GB. At this capacity that is not a footnote; it is the number that decides whether the tier is built as a wide parity group or as mirrors, and it is why drives this size are usually found in arrays of ten or more rather than in pairs.
Against the plain PM893 at the same capacity the endurance is exactly the same 14,016 TBW, the sequential figures are 10 MB/s higher here, random write is 1K higher and random read 1K lower. At this capacity the "a" revision changes the security statement and the warranty basis, not the drive.
Density, and the operational arithmetic that comes with it. Ten of these in a 1U chassis is 76.8 TB raw — eight times the same ten bays filled with 960 GB drives — with the same ten ports, ten cables and ten firmware records as the smaller build would need for an eighth of the space. For a read-mostly tier measured in tens of terabytes, that is the entire argument.
It is also the first capacity in this family where the endurance figure stops being a formality. 14,016 TB is 7.68 TB written every day for five years; a repository or staging volume that is rewritten on a schedule can approach that, where a boot pair never will. It is still 1.0 drive-writes-per-day, so a write-heavy volume is still the wrong workload — but at this size a read-mostly volume finally has a write budget worth reading.
What it does not offer is a mixed-use option at the same capacity. The SM883 range tops out at 3.84 TB, so anyone who needs 3.0 drive-writes-per-day and 7.68 TB of room is choosing between this drive and a different interface — there is no SATA mixed-use drive of this size in the current line-up.
| Product family | Samsung PM893a (V-NAND SSD, data centre / read-intensive) |
|---|---|
| PN | MZ7L37T6HELA (catalogue code) |
| Ordering codes | MZ7L37T6HELA-00A07 and MZ7L37T6HELA-00B07 |
| Capacity | 7.68 TB (7,680 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm, max 70 g) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung in-house controller, with DRAM cache |
| NAND | Samsung V-NAND TLC, read-intensive over-provisioning |
| Sequential read / write | 560 MB/s / 530 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 31K IOPS write |
| Latency | 120 µs read / 40 µs write at QD1 |
| Endurance | 14,016 TBW — 1.0 DWPD over a five-year basis (Samsung states five years directly; no three-year conversion needed) |
| Power | Active read 2.2 W; active write 3.2 W (typical, 4 KB random read / 128 KB write) |
| Power-loss protection | Yes — Samsung documents power-loss safeguards for this generation; no hold-up time is published |
| Data security | AES 256-bit full-disk encryption; TCG Opal 2.0 and IEEE 1667 encrypted drive |
| Features | TRIM (OS support required), Garbage Collection, S.M.A.R.T. |
| Reliability | MTBF 2.0 million hours; UBER below 1 unrecoverable error per 10^17 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating −40 °C to 85 °C; humidity 5% to 95%, non-condensing |
| Shock and vibration | 1,500 G at 0.5 ms non-operating, 3 axes; 20 G sine sweep, 20–2,000 Hz |
| Status | In production — the PM893a is Samsung’s current mainstream SATA data-centre line |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7L37T6HELA | Model code | New / used | Enquire |
| MZ7L37T6HELA-00A07 | Ordering code | New / used | Enquire |
| MZ7L37T6HELA-00B07 | Ordering code | New / used | Enquire |
The three strings describe the same drive. MZ7L37T6HELA is the model name, with the 7T6 block recording the 7.68 TB capacity and the trailing HELA block shared with the 1.92 TB and 3.84 TB members — the 960 GB carries ELT and the 480 GB EJD. -00A07 and -00B07 identify firmware and customer variant, not capacity or endurance grade. Both appear on PM893a parts in circulation, so tell us which one the platform expects and we will match it.
At 1.0 drive-writes-per-day for five years it is 7.68 TB of writes every day — 2,803 TB a year, fourteen petabytes across the warranty. Written flat out at 530 MB/s the rating would last about 306 days, which is the first capacity in this family where that figure sounds like a workload rather than a thought experiment.
That has a practical consequence for specification writing: at 960 GB and 1.92 TB the endurance number is almost always irrelevant, and at 7.68 TB it is worth calculating against the actual rewrite rate. A nightly 500 GB image refresh uses 6.5% of the daily allowance; a staging tier that cycles its full capacity twice a day uses 200% and is the wrong home for this drive.
Fits: large read-mostly data tiers, image and firmware repositories at scale, backup staging, media archives that are written once and read many times, and any build where bay count or enclosure power is the binding constraint rather than drive count. It is also the sensible spare for a fleet of 3.84 TB PM893a drives, since firmware and security behaviour are identical across the family.
Does not fit: journals, write caches, or any tier that rewrites its working set more than once a day. For that workload at 3.84 TB or below, the mixed-use SM883 carries 21,024 TBW at 3.0 drive-writes-per-day; above 3.84 TB there is no SATA mixed-use option, and the answer is a SAS or NVMe tier rather than a bigger SATA drive.
Two things it does not have. No published hold-up time for the power-loss circuit: the safeguards are documented, the milliseconds are not, so it covers a brief interruption rather than guaranteeing a flush window. And no dual-porting — a single-port 6 Gb/s SATA drive, which is what internal bays expect and what shared storage does not.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM893a 480 GB | 480 GB | 560 / 360 MB/s | 97K / 17K IOPS | 876 TB (1.0 DWPD) | Read-intensive |
| PM893a 960 GB | 960 GB | 560 / 530 MB/s | 97K / 31K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive |
| PM893a 1.92 TB | 1.92 TB | 560 / 530 MB/s | 97K / 31K IOPS | 3,504 TB (1.0 DWPD) | Read-intensive |
| PM893a 3.84 TB | 3.84 TB | 560 / 530 MB/s | 97K / 31K IOPS | 7,008 TB (1.0 DWPD) | Read-intensive |
| PM893a 7.68 TB | 7.68 TB | 560 / 530 MB/s | 97K / 31K IOPS | 14,016 TB (1.0 DWPD) | Read-intensive |
| PM893 7.68 TB | 7.68 TB | 550 / 520 MB/s | 98K / 30K IOPS | 14,016 TB (1.0 DWPD) | Read-intensive |
| PM883 7.68 TB | 7.68 TB | 550 / 520 MB/s | 98K / 27K IOPS | 10,932 TB (0.78 DWPD) | Read-intensive |
The five PM893a rows are the clearest case of a capacity ladder in this catalogue: from 960 GB up, every performance figure is identical and only capacity and its proportional write budget move. That means the choice inside the family is made on room, not on speed, and the 480 GB row is the only one that behaves differently.
Against the PM883 it replaces, this drive adds 10 MB/s on both sequential figures, 4K of random write and 3,084 TB of endurance — a 28% increase in the endurance figure, the same proportional step every capacity in this generation took. Against the plain PM893 at the same size there is no endurance difference at all, only the security statement and the warranty basis.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from. Send the quantity, the condition you need, the ordering suffix the platform expects and the server model the drives are going into, and you will get a quote with lead time the same working day. Array builds are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV