1.92 TB 2.5-inch SATA read-intensive SSD, ordering codes MZ7L31T9HELA-00A07 and -00B07
| Capacity | 1.92 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 3,504 TB |
| Sequential Read | 560 MB/s |
| Sequential Write | 530 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 31K IOPS |
| Power | 2.2 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM893a 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MZ7L31T9HELA, supplied as -00A07 or -00B07. 560 MB/s sequential read, 530 MB/s sequential write, 97K random read and 31K random write IOPS, 3,504 TBW at 1.0 drive-writes-per-day over five years, with TCG Opal 2.0 as standard. Stocked new or as tested pulls with a 1-year warranty from us.
This is the capacity where the PM893a stops being a boot device and starts holding data. At 960 GB the read-intensive tiers on this site are almost all system volumes; at 1.92 TB the same enclosure and the same 2.5-inch bay can carry a hypervisor image store, a small VMFS datastore, a backup staging area or a two-drive mirror with room for the rebuild. Nothing about the drive changes to enable that — the capacity does.
Because the performance does not change at all. The 960 GB member and this drive are identical at 560/530 MB/s and 97K/31K IOPS, with the same 40 µs write latency and the same read-only workload rating. What doubles is the write budget — 1,752 TB to 3,504 TB at an unchanged 1.0 DWPD — and what moves by one tenth of a watt is the active read power, 2.1 W to 2.2 W. This is a capacity purchase, and it is priced like one.
Against the plain PM893 at the same capacity the endurance is exactly the same 3,504 TBW, the sequential figures are 10 MB/s higher here, random write is 1K higher and random read 1K lower. The "a" revision is not a performance step at this capacity; it is TCG Opal 2.0 written into the specification and endurance stated on a five-year basis instead of a three-year one that had to be converted before anyone could compare it.
Room, and the four things that come with it. Two 960 GB drives in a mirror use two bays, two ports, two firmware records and two devices that can fail independently, to deliver 960 GB of usable space; one 1.92 TB drive uses half of that inventory for the same usable capacity, draws 2.2 W instead of 4.2 W under read, and leaves a bay free for the next thing. In a 1U with eight or ten bays that arithmetic decides the build long before the IOPS figures do.
It also moves the drive into workloads where the write budget matters. 3,504 TB is 1.92 TB written every day for five years — double the daily allowance of the 960 GB at the same DWPD, and enough for a staging volume that is refreshed on a schedule rather than a boot disk that is written once.
The performance ceiling, though, is already reached one step below. Everything from 960 GB up in this family runs 560/530 MB/s and 97K/31K IOPS, so this drive does not buy speed over its smaller sibling and the 3.84 TB does not buy speed over this one. Above 960 GB the only variable is capacity and the endurance that scales with it.
| Product family | Samsung PM893a (V-NAND SSD, data centre / read-intensive) |
|---|---|
| PN | MZ7L31T9HELA (catalogue code) |
| Ordering codes | MZ7L31T9HELA-00A07 and MZ7L31T9HELA-00B07 |
| Capacity | 1.92 TB (1,920 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm, max 70 g) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung in-house controller, with DRAM cache |
| NAND | Samsung V-NAND TLC, read-intensive over-provisioning |
| Sequential read / write | 560 MB/s / 530 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 31K IOPS write |
| Latency | 120 µs read / 40 µs write at QD1 |
| Endurance | 3,504 TBW — 1.0 DWPD over a five-year basis (Samsung states five years directly; no three-year conversion needed) |
| Power | Active read 2.2 W; active write 3.2 W (typical, 4 KB random read / 128 KB write) |
| Power-loss protection | Yes — Samsung documents power-loss safeguards for this generation; no hold-up time is published |
| Data security | AES 256-bit full-disk encryption; TCG Opal 2.0 and IEEE 1667 encrypted drive |
| Features | TRIM (OS support required), Garbage Collection, S.M.A.R.T. |
| Reliability | MTBF 2.0 million hours; UBER below 1 unrecoverable error per 10^17 bits read |
| Environmental | Operating 0 °C to 70 °C; non-operating −40 °C to 85 °C; humidity 5% to 95%, non-condensing |
| Shock and vibration | 1,500 G at 0.5 ms non-operating, 3 axes; 20 G sine sweep, 20–2,000 Hz |
| Status | In production — the PM893a is Samsung’s current mainstream SATA data-centre line |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7L31T9HELA | Model code | New / used | Enquire |
| MZ7L31T9HELA-00A07 | Ordering code | New / used | Enquire |
| MZ7L31T9HELA-00B07 | Ordering code | New / used | Enquire |
The three strings describe the same drive. MZ7L31T9HELA is the model name, with the 1T9 block recording the 1.92 TB capacity and the trailing HELA block distinguishing this capacity's build from the 960 GB member (ELT) and the 480 GB member (EJD). -00A07 and -00B07 are the ordering codes that identify firmware and customer variant, not capacity or endurance grade. Both appear on PM893a parts in circulation, so tell us which one the platform expects and we will match it.
At 1.0 drive-writes-per-day for five years it is 1.92 TB of writes every day — 700 TB a year, three and a half petabytes across the warranty. For a mirror holding a hypervisor image store or a staging volume that is refreshed nightly, that is ample headroom. For a database log or a write cache it is the figure that rules the drive out, and no capacity in this family fixes that — the grade does.
Written flat out at 530 MB/s the rating would last about 77 days. That sounds short until it is compared with the workload: a staging volume that takes a nightly 200 GB image uses a tenth of one day's allowance, and the endurance figure is there for the bad week, not the normal one.
Fits: hypervisor image stores, small VMFS and NFS datastores, backup staging, read-mostly application volumes, and any two-bay build where a mirror of this capacity removes a shelf from the design. It is also the sane spare for a fleet of 960 GB PM893a drives, because the firmware and the security behaviour are the same.
Does not fit: journal volumes, write caches, or anything that writes at line rate continuously. The mixed-use SM883 at 1.92 TB carries 10,512 TBW at 3.0 drive-writes-per-day with 29K random write, which is three times the daily allowance for a small loss on sequential read — that is the drive for a write-heavy tier at this size.
Two things it does not have. No published hold-up time for the power-loss circuit: the safeguards are documented, the milliseconds are not, so it covers a brief interruption rather than a guaranteed flush window. And no dual-porting — this is a single-port 6 Gb/s SATA drive, which is what internal bays expect and shared storage does not.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM893a 480 GB | 480 GB | 560 / 360 MB/s | 97K / 17K IOPS | 876 TB (1.0 DWPD) | Read-intensive |
| PM893a 960 GB | 960 GB | 560 / 530 MB/s | 97K / 31K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive |
| PM893a 1.92 TB | 1.92 TB | 560 / 530 MB/s | 97K / 31K IOPS | 3,504 TB (1.0 DWPD) | Read-intensive |
| PM893a 3.84 TB | 3.84 TB | 560 / 530 MB/s | 97K / 31K IOPS | 7,008 TB (1.0 DWPD) | Read-intensive |
| PM893 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 30K IOPS | 3,504 TB (1.0 DWPD) | Read-intensive |
| PM883 1.92 TB | 1.92 TB | 550 / 520 MB/s | 98K / 25K IOPS | 2,733 TB (0.78 DWPD) | Read-intensive |
| SM883 1.92 TB | 1.92 TB | 540 / 520 MB/s | 97K / 29K IOPS | 10,512 TB (3.0 DWPD) | Mixed-use |
| PM863a 1.92 TB | 1.92 TB | 520 / 480 MB/s | 97K / 24K IOPS | 2,733 TB (0.78 DWPD) | Read-intensive |
Two patterns are worth reading off that table. The first is that sequential read at the top of the column is 560 MB/s and the oldest drive is 40 MB/s behind it — four generations of read-intensive SATA bought very little on the read side. The second is that endurance at 1 DWPD has been identical at 3,504 TB for two generations, which means the PM893a at this capacity is not a slightly faster PM893 so much as the same drive with a security feature and a cleaner warranty statement.
Where the table actually diverges is the last two rows. The mixed-use SM883 triples the endurance and drops sequential read by 20 MB/s, which is the trade a write-heavy tier should take; the PM863a is the drive this one replaces, and the gap is 40 MB/s of read, 50 MB/s of write and 7K of random write for 771 TB more endurance. Nothing here is a straight upgrade — each row answers a different question about the workload.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from. Send the quantity, the condition you need, the ordering suffix the platform expects and the server model the drives are going into, and you will get a quote with lead time the same working day. Mirror pairs are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV