Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZ-7L37T600 · Samsung

Samsung PM893 7.68TB SATA SSD (MZ-7L37T600)

7.68 TB 2.5-inch SATA enterprise SSD, ordering codes -00A07 / -00W07 / -00B7C

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZ-7L37T600
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 7.68 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1
TBW 14,016 TB
Sequential Read 550 MB/s
Sequential Write 520 MB/s
Random Read IOPS 98K IOPS
Random Write IOPS 30K IOPS
Power 3.2 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption Opal 2.0
Condition New · Used

Frequently Asked Questions

Yes. The family stops at 7.68 TB, so anything larger means a different Samsung line or an NVMe platform. Twelve of these in a 2U give 92 TB raw, which is the highest capacity this SATA family can put in that chassis.

No. From 480 GB upward every PM893 runs at 550/520 MB/s and 98K/29K to 30K IOPS; 7.68 TB is at 30K random write. What changes with capacity is endurance (14,016 TBW here) and the raw capacity per bay. The only capacity with reduced write speed is 240 GB, at 380 MB/s and 15K IOPS.

The middle block changes with capacity: HCHQ at 240 and 480 GB, HCJR at 960 GB, HBLT at 1.92 and 3.84 TB, and HBLA at 7.68 TB. The numeric block follows the capacity in every case (3240, 3480, 3960, 31T9, 33T8, 37T6). Copy the full string from your paperwork rather than editing a neighbouring code.

Whichever one your paperwork carries. All four identify the same 7.68 TB drive at the same published figures. MZ-7L37T600 is the catalogue code we quote under, -00W07 is the part number printed in Samsung’s datasheet and the default for a new build, and the other two cover existing BOMs and asset registers.

Samsung rates the drive at 7.68 TB decimal, which operating systems display as roughly 6.98 TiB in binary units. That is a unit conversion rather than missing capacity; a small additional portion is reserved for over-provisioning and firmware.

Any 2.5-inch 7 mm hot-swap bay on a SATA controller, or a SAS backplane whose expander accepts SATA targets - Dell PowerEdge R760xd2/R860/R960 front cages, HPE ProLiant DL380/DL385 Gen10 Plus 2.5-inch cages, Lenovo SR650 V2/SR665/SR860, and Supermicro 2U twelve- or twenty-four-bay chassis. Each drive ships with a S.M.A.R.T. snapshot after full-surface read verification and a 4 KB QD32 run.

Samsung PM893 7.68 TB in the 2.5-inch 7 mm SATA form factor, catalogued under MZ-7L37T600 and supplied under the three ordering codes that carry the same build: MZ7L37T6HBLA-00A07, MZ7L37T6HBLA-00W07 and MZ7L37T6HBLA-00B7C. 550 MB/s sequential read, 520 MB/s sequential write, 14,016 TBW, power-loss protection. Supplied new or as tested pulls, with a 1-year warranty from us.

7.68 TB is the top of the PM893 line, and it is the capacity that makes the bay count disappear from the planning. Twelve of these in a 2U hold 92 TB raw; four of them replace sixteen 1.92 TB drives at the same capacity. Where a chassis is nearly full and the target is capacity rather than IOPS, this is the step that avoids a second shelf.

Performance is identical to every other capacity from 480 GB upward: 550/520 MB/s and 98K/30K IOPS. What the money buys here is endurance and density — 14,016 TBW, twice the 3.84 TB part and thirty-two times the 240 GB — so a read-intensive tier is covered for the life of the platform rather than until the next refresh.

Everything else is the standard SATA feature set: hot-swap 7 mm bays, 6 Gb/s falling back to 3 Gb/s and 1.5 Gb/s, SAS backplanes whose expander accepts SATA targets, PLP capacitors, AES 256-bit full-disk encryption with TCG Opal 2.0 and IEEE 1667, TRIM, garbage collection and S.M.A.R.T. Active power averages 2.2 W reading and 3.2 W writing with 1.5 W idle, so a twelve-drive bay adds roughly 38 W to the node for ninety-two terabytes.

Where 7.68 TB sits: the last capacity in the family

There is no larger PM893. The line stops here, at 7.68 TB, so a pool that needs more room per bay changes platform rather than SKU. Inside this family the choice at the top end is arithmetic: 12 bays of 3.84 TB gives 46 TB, the same bays at 7.68 TB give 92 TB, and the power, the backplane, the 7 mm clearance and the controller ports are unchanged.

At 1 DWPD the rating works out to 14,016 ÷ (7.68 × 365 × 5) = 1.0, the same as everywhere else in the line, but the absolute figure is now large enough that a read-mostly or capacity tier will not approach it inside five years. The Samsung PM893 3.84 TB is the right buy when the pool target is half of this, or when two shelves at a lower unit price are acceptable.

Endurance at 7.68 TB, and what 1 DWPD still rules out

Capacity does not change the rating. 1 DWPD covers an operating system, a virtualisation datastore, a boot-from-image tier, a backup landing zone or a read-mostly pool; it does not cover a write cache, a journal or a database that commits continuously, however many terabytes the drive holds. A tier that writes a full drive every day for five years is a 3 DWPD tier at any capacity.

For those workloads the PM897 is the same 2.5-inch SATA footprint at 3 DWPD, and mixing the two in a chassis is normal: PM897 where the writes land, PM893 for the boot pair and the read-mostly tiers. At this capacity, though, the usual reason to buy the PM897 instead is the write rate, never the endurance number on its own.

Technical specifications

Product familySamsung PM893 (V-NAND SSD, data center / server)
PNMZ-7L37T600 (catalogue code)
Ordering codesMZ7L37T6HBLA-00W07, MZ7L37T6HBLA-00A07, MZ7L37T6HBLA-00B7C
Capacity7.68 TB (7,680 GB decimal)
Form factor2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm)
InterfaceSATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s
ControllerSamsung in-house controller, DRAM cache with LPDDR4
NANDSamsung V-NAND TLC
Sequential read / write550 MB/s / 520 MB/s
Random 4 KB (QD32)98K IOPS read / 30K IOPS write
Endurance14,016 TBW — 1 DWPD over a 5-year rating period
PowerIdle 1.5 W (DIPM off); active average 2.2 W read / 3.2 W write
Power-loss protectionYes, PLP capacitors
Data securityAES 256-bit full-disk encryption, TCG Opal 2.0, IEEE 1667
FeaturesTRIM, garbage collection, S.M.A.R.T.
ReliabilityMTBF 2.0 million hours; operating 0 °C to 70 °C; non-operating -40 °C to 85 °C; 5–95% RH non-condensing
Shock / vibration1,500 G at 0.5 ms non-operating; 20–2,000 Hz at 20 G non-operating

Ordering codes we can supply at 7.68 TB

CodeTypeConditionQuote
MZ-7L37T600Catalogue codeNew / usedEnquire
MZ7L37T6HBLA-00W07Standard codeNew / usedEnquire
MZ7L37T6HBLA-00A07Channel codeNew / usedEnquire
MZ7L37T6HBLA-00B7CChannel codeNew / usedEnquire

All four are the same 7.68 TB drive, stocked in both conditions. MZ-7L37T600 is what we catalogue and quote under; the three ordering codes are what a PO line, a BOM or a warranty claim is usually written against, with -00W07 the standard code. The middle block is HBLA at this capacity and only at this capacity — HCHQ at 240 and 480 GB, HCJR at 960 GB, HBLT at 1.92 and 3.84 TB. Copy the whole string rather than editing a neighbouring one.

How 7.68 TB compares with the rest of the PM893 family

ModelCapacitySequential read / writeRandom read / writeEnduranceActive power (read / write)
PM893 7.68 TB7.68 TB550 / 520 MB/s98K / 30K IOPS14,016 TBW (1 DWPD)2.2 / 3.2 W
PM893 240 GB240 GB550 / 380 MB/s98K / 15K IOPS438 TBW (1 DWPD)2.1 / 2.7 W
PM893 480 GB480 GB550 / 520 MB/s98K / 29K IOPS876 TBW (1 DWPD)2.1 / 3.2 W
PM893 960 GB960 GB550 / 520 MB/s98K / 30K IOPS1,752 TBW (1 DWPD)2.2 / 3.2 W
PM893 1.92 TB1.92 TB550 / 520 MB/s98K / 30K IOPS3,504 TBW (1 DWPD)2.2 / 3.2 W
PM893 3.84 TB3.84 TB550 / 520 MB/s98K / 30K IOPS7,008 TBW (1 DWPD)2.2 / 3.2 W

3.84 TB is the same drive at half the capacity and half the endurance, 7,008 TBW, at the same speed. Two of them per slot pair give the same raw capacity as one of these with twice the failure domains, which is the trade a buyer makes when unit price per drive matters more than bay count.

1.92 TB and below are worth it only where the workload is a boot pair or per-node local storage: at twelve bays those capacities leave 23 TB or less raw against 92 TB here, and the speed is identical, so the smaller parts are buying neither performance nor density.

PM897 shares the footprint at 3 DWPD against 1 DWPD. At this capacity that is a write-rate decision rather than an endurance one, and a read-mostly pool does not need it.

Chassis and backplanes that take it

Any 2.5-inch 7 mm hot-swap bay on a SATA controller accepts it, and SAS backplanes work where the expander accepts SATA targets. At this capacity the buy is normally a full shelf:

If the chassis has PCIe lanes to spare and the workload is write-heavy, a different interface is the better conversation. This drive is for the SATA shelf that has to hold as many terabytes as the bay count allows.

How each drive is tested before it ships

Warranty, lead time and volume quotes

Every drive carries a 1-year warranty against defects in workmanship and function; verified faulty units are replaced or refunded and we cover return shipping. New and used stock are held separately, the condition you order is confirmed before dispatch, and used units are tested pulls rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days; tracking is issued at dispatch.

Pricing is quoted per order because condition and quantity both move it, and shelf-sized orders are priced as a set rather than as single drives. Send the quantity, the condition, the chassis model and the ordering code as it appears on your paperwork; for a pool build we quote a matched set from one batch so the drives in a shelf share firmware generation.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View