480 GB 2.5-inch SATA read-intensive SSD, ordering codes MZ7L3480HEJD-00A07 and -00B07
| Capacity | 480 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 876 TB |
| Sequential Read | 560 MB/s |
| Sequential Write | 360 MB/s |
| Random Read IOPS | 97K IOPS |
| Random Write IOPS | 17K IOPS |
| Power | 2.1 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | Opal 2.0 |
| Condition | New · Used |
Samsung PM893a 480 GB, 2.5-inch 7 mm SATA, catalogue code MZ7L3480HEJD, supplied as -00A07 or -00B07. 560 MB/s sequential read, 360 MB/s sequential write, 97K random read and 17K random write IOPS, 876 TBW at 1.0 drive-writes-per-day over five years, on Samsung V-NAND TLC behind an in-house controller. Stocked new or as tested pulls with a 1-year warranty from us.
The "a" revision modernises the PM893 line — 560 MB/s read instead of 550, TCG Opal 2.0, a full five-year 1 DWPD rating stated plainly — but at 480 GB it does something that needs saying out loud: sequential write drops to 360 MB/s and random write to 17K, where the plain PM893 at the same capacity writes 520 MB/s and 29K. The 960 GB and larger members of this family write at 530 MB/s and 31K, so the shortfall is specific to the smallest capacity, not to the revision.
That makes this drive a read device with an unusually clear job: a boot volume, an application tier, an image or firmware repository, anything where the bytes are read far more often than written. On those roles the 560 MB/s read and 97K random read are the numbers in play, the 17K random-write side never becomes visible, and the drive is current-generation rather than legacy stock.
It also states its endurance on a five-year basis directly — 1.0 DWPD, 876 TB — where the PM883 and PM863a ranges publish a three-year intensity that has to be converted, which makes its 876 TBW directly comparable with everything else on this site. TCG Opal 2.0 and end-to-end data protection are standard, power-loss safeguards are documented, and the drive carries a 2-million-hour MTBF.
On the read side, very little: 560 against 550 MB/s sequential and 97K against 98K random. Where it moved is the security and warranty story — TCG Opal 2.0 stated as a feature rather than an option, and endurance published as 1 DWPD over five years instead of a three-year figure that had to be converted. Both changes matter to a buyer who has to write a specification, and neither changes how the drive behaves in a server.
On the write side at this capacity it went backwards, and the reason is almost certainly the flash transition rather than the controller: a 480 GB drive built on newer, denser TLC has fewer dies to spread writes across, which is exactly the constraint that makes small capacities the slow writers in every generation. The 960 GB member of the same family writes 530 MB/s, so anything that needs write throughput at this size should step up a capacity or take a mixed-use drive.
The practical consequence is a clean rule. If the volume is read-mostly, buy this: it is current, it has Opal, and its read side is the fastest in the PM893 line. If the volume is written all day, buy the mixed-use SM883 at 480 GB — 2,628 TBW at 3.0 drive-writes-per-day, 27K random write — or step up to the 960 GB member, where write reaches 530 MB/s and endurance doubles.
| Product family | Samsung PM893a (V-NAND SSD, data centre / read-intensive) |
|---|---|
| PN | MZ7L3480HEJD (catalogue code) |
| Ordering codes | MZ7L3480HEJD-00A07 and MZ7L3480HEJD-00B07 |
| Capacity | 480 GB (480 GB decimal) |
| Form factor | 2.5-inch, 7.0 mm (100.20 × 69.85 × 7.0 mm, max 70 g) |
| Interface | SATA 6 Gb/s, compatible with SATA 3 Gb/s and 1.5 Gb/s |
| Controller | Samsung in-house controller, with DRAM cache |
| NAND | Samsung V-NAND TLC, read-intensive over-provisioning |
| Sequential read / write | 560 MB/s / 360 MB/s (128 KB, QD32) |
| Random 4 KB (QD32) | 97K IOPS read / 17K IOPS write |
| Latency | 120 µs read / 60 µs write at QD1 |
| Endurance | 876 TBW — 1.0 DWPD over a five-year basis (Samsung states five years directly; no three-year conversion needed) |
| Power | Active read 2.1 W; active write 3.2 W (typical, 4 KB random read / 128 KB write) |
| Power-loss protection | Yes — Samsung documents power-loss safeguards for this generation; no hold-up time is published |
| Data security | AES 256-bit full-disk encryption; TCG Opal 2.0 and IEEE 1667 encrypted drive |
| Features | TRIM, NCQ to depth 32, Garbage Collection, S.M.A.R.T., end-to-end data protection |
| Reliability | MTBF 2.0 million hours; UBER 1 sector per 1017 bits read; operating 0 °C to 70 °C |
| Shock and vibration | 1,500 G at 0.5 ms, 3 axes; 20 G sine sweep, 20–2,000 Hz |
| Humidity | 5% to 95%, non-condensing |
| Status | In production — the PM893a is Samsung’s current mainstream SATA data-centre line |
| Code | Type | Condition | Quote |
|---|---|---|---|
| MZ7L3480HEJD | Model code | New / used | Enquire |
| MZ7L3480HEJD-00A07 | Ordering code | New / used | Enquire |
| MZ7L3480HEJD-00B07 | Ordering code | New / used | Enquire |
All three strings describe the same 480 GB drive, and the difference is in the suffix rather than the specification. MZ7L3480HEJD is the model name; -00A07 and -00B07 are the ordering codes that identify the firmware and customer variant a specific batch was built for. Both suffixes appear on PM893a parts in circulation, and both are quoted here because a PO will contain one of them. Tell us which you need and we will match it; if the platform does not care, either will do, and we will say which batch we are shipping from.
0.48 TB of writes every day for five years — 480 GB at 1.0 drive-writes-per-day. That is the standard read-intensive allowance at this capacity and exactly what a boot volume, an application tier or an image repository consumes across a service life, with room for patching and log rotation. It is a third of what the mixed-use drive at this capacity allows, and that ratio is the purchase decision in one line.
The figure needs no conversion, which is the quiet advantage of the "a" revision: Samsung states 1 DWPD over five years directly, so 1.0 × 365 × 5 × 480 GB = 876 TB and there is no three-year basis to reconcile. On the previous generation and on the PM883, the published intensity was a three-year figure that had to be spread over five to compare — here the number is already in the units everything else on this site uses.
For scale within the family: 876 / 1,752 / 3,504 / 7,008 TB at 480 GB, 960 GB, 1.92 TB and 3.84 TB, doubling with capacity at an unchanged 1.0 DWPD, and 14,016 TB at 7.68 TB. The plain PM893 at this capacity carries the same 876 TB — the revision did not change the endurance, only the way it is stated.
The roles are read-dominated and modest in size: a hypervisor boot device or a mirrored pair, an operating-system volume for an appliance, an ISO and firmware repository, a read-mostly web or application tier, a container image store, a restore target that is written in a window and read for a month. At 480 GB the drive holds an OS plus its application set with room to spare, and the read side is the fastest in the PM893 family.
Two limits are worth knowing before specifying it. The write side is the price of the read side at this capacity: 360 MB/s sequential and 17K random write are below the plain PM893 at the same size, so anything that writes continuously — a journal, a cache tier, a log volume — belongs on a mixed-use drive instead. And power-loss protection is documented but unquantified: Samsung states safeguards for this generation without publishing a hold-up time, so a UPS remains part of the design for anything transactional.
Everything else is current rather than legacy. TCG Opal 2.0 and IEEE 1667 are supported, so the drive can be used with self-encrypting-drive management rather than only bulk encryption at rest; the part is in production rather than remaining stock; and the five-year 1 DWPD rating is stated in the form a tender document expects. That is the difference between this drive and the PM883 at the same capacity, which is faster on write but is a discontinued generation with no Opal claim.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| PM893a 480 GB | 480 GB | 560 / 360 MB/s | 97K / 17K IOPS | 876 TB (1.0 DWPD) | Read-intensive |
| PM893a 960 GB | 960 GB | 560 / 530 MB/s | 97K / 31K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive |
| PM893 480 GB | 480 GB | 550 / 520 MB/s | 98K / 29K IOPS | 876 TB (1.0 DWPD) | Read-intensive |
| PM883 480 GB | 480 GB | 550 / 520 MB/s | 98K / 24K IOPS | 683 TB (0.78 DWPD) | Read-intensive |
| PM863a 480 GB | 480 GB | 520 / 480 MB/s | 97K / 16K IOPS | 683 TB (0.78 DWPD) | Read-intensive |
| SM883 480 GB | 480 GB | 540 / 520 MB/s | 97K / 27K IOPS | 2,628 TB (3.0 DWPD) | Mixed-use |
The table makes the trade visible in one place. This drive has the best read figure of the 480 GB rows and the worst write figure of any row in the table; the plain PM893 at the same capacity and the same 876 TBW writes 160 MB/s faster and 12K more random IOPS; and the mixed-use SM883 triples the endurance for a small loss on read. Nothing here is a straight upgrade — each row answers a different question.
Within the PM893a family itself the same pattern holds with capacity rather than model. The 960 GB member writes 530 MB/s and 31K random, so the write shortfall here is a property of 480 GB rather than of the revision; if the workload needs both this read speed and real write throughput, that is the capacity to specify.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and which batch the units come from. Send the quantity, the condition you need, the ordering suffix the platform expects and the server model the drives are going into, and you will get a quote with lead time the same working day. Boot pairs are matched from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV