800 GB 2.5-inch SATA read-intensive SSD, ordering code MTFDDAK800MBP-1AN1ZABYY
| Capacity | 800 GB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | MLC |
| Endurance (DWPD) | 1.7 |
| TBW | 2,500 TB |
| Sequential Read | 420 MB/s |
| Sequential Write | 380 MB/s |
| Random Read IOPS | 65K IOPS |
| Random Write IOPS | 30K IOPS |
| Power | 6.3 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron M510DC 800 GB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK800MBP, ordering code MTFDDAK800MBP-1AN1ZABYY. 420 MB/s sequential read, 380 MB/s sequential write, 65K random read and 30K random write IOPS at 4 KB, 2,500 TBW on Micron 16nm MLC NAND, with a data-protection capacitor, TCG Enterprise self-encryption and end-to-end data path protection. Stocked new or as tested pulls with a 1-year warranty from us.
This is the capacity where the range's endurance curve turns down for the first time. Moving up from the 600 GB member buys 33% more bytes and gives up 34% of the write budget, 3,800 TB to 2,500 TB, along with 25% of random write. It is still a much stronger drive than the 960 GB part above it — 2.2 times the write budget and nearly three times the random write — which is why 800 GB is the right answer when the space is needed and the 960 GB rating is not.
The range publishes six capacities on three endurance rules: 120, 240 and 480 GB at two drive fills a day, 600 GB at 3.5, and 800 and 960 GB at 1.7 and 1.0. This is the first capacity on the downward part of that curve. Sequential write does not fall with it — 380 MB/s holds from 480 GB upward — and random read actually rises to 65K, so the only thing being traded for bytes here is write endurance and a little random-write throughput.
The step from 600 to 800 GB is a clean trade to price. 33% more capacity, 34% less write budget, 25% less random write, and a write latency that moves from 1.0 ms to 1.5 ms. If the application needs the space and writes less than about 1,370 GB a day, nothing is lost; if it writes more than that, the 600 GB drive is the one to keep and the extra capacity has to come from a second device.
The step from 800 to 960 GB is a different kind of trade and a worse one for most uses. Twice the bytes against 54% less write budget, random write falling from 30K to 10.5K, and write latency doubling to 3.0 ms. The 960 GB drive exists for the case where nothing but capacity matters; for anything that writes to the volume, 800 GB is the better device and it is the reason this page exists.
| Product family | Micron M510DC (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK800MBP (catalogue code) |
| Ordering code | MTFDDAK800MBP-1AN1ZABYY |
| Capacity | 800 GB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (69.85 × 100.45 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS2, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 16nm MLC NAND |
| Sequential read / write | 420 MB/s / 380 MB/s (128 KB, steady state) |
| Random 4 KB (QD32) | 65K IOPS read / 30K IOPS write |
| Latency | 0.50 ms read / 1.5 ms write (typical) |
| Endurance | 2,500 TBW — 1.7 DWPD over five years |
| TBW basis | 55 °C case temperature, drive 100% full, 100% random aligned 4 KB writes |
| Power | Idle 1.2 W; sequential write max 6.3 W; sequential read max under 6.3 W; active average 1.5 W |
| Rated input | 5 V ±10% at the connector, sized for backplane supply rather than measured draw |
| Power-loss protection | Yes — data-protection capacitor, with capacitor monitoring reported by firmware |
| Data security | TCG Enterprise 1.0 SED (self-encrypting drive); AES encryption engine |
| DRAM cache | Yes — on-board DDR3 DRAM |
| Features | XPERT feature set: data path protection, adaptive thermal monitoring, power-loss protection; static and dynamic wear levelling; end-to-end data protection |
| Reliability | MTTF 2.0 million device hours; UBER under 1 sector per 1016 bits read |
| Environmental | Operating 0 °C to 70 °C (case); non-operating −40 °C to 85 °C; humidity 5–95% non-condensing; operating shock 1500G/0.5 ms; vibration 10–500 Hz at 3.1G |
2,500 TB over five years is 1,370 GB of writes every day — a little under two full fills of an 800 GB drive. Written flat out at 380 MB/s the rating would last about 76 days, longer than the 480 GB member manages but shorter than the 600 GB part's 116 days. The basis is a 55 °C case, a drive held 100% full and 100% random aligned 4 KB writes, so it is a harsher workload than any sequential one.
For planning, the daily allowance is the number that matters. An 800 GB volume that rewrites its working set once a day uses 800 GB, or 58% of the allowance; twice a day exceeds it. That is the practical boundary between this capacity and the 600 GB part: at one fill a day, 800 GB gives 33% more space with margin to spare; at two fills a day, 800 GB lands at 117% of its rating and the 600 GB drive, rated 3.5 fills, is the safer device.
Where this drive separates from the rest of the range is the comparison with the Samsung PM893 at 960 GB. That drive has 20% more capacity and carries 1,752 TBW, which is 30% less write budget than this one, at 1.0 drive fill a day. A buyer who needs around a terabyte of read-intensive space therefore gets more endurance from the smaller 800 GB M510DC than from the larger TLC part, and gives up 130 MB/s of sequential write in exchange.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK800MBP | Catalogue code | New / used | Enquire |
| MTFDDAK800MBP-1AN1ZABYY | Ordering code | New / used | Enquire |
The part number decodes by position. MTFDDAK is the prefix Micron uses for its SATA solid-state drives in this form factor, 800 is the capacity in gigabytes, MBP is the family and form-factor block, and everything after the hyphen is the configuration string Micron assigns at order entry. All six capacities of this range share -1AN1ZABYY, so the three digits in the middle are the only distinguishing field on a mixed pallet.
800 GB is one of two non-standard capacities in the range, the other being 600 GB. Neither is a power of two nor a quarter-step from one, and both exist because some platforms are specified in raw decimal capacity and some OEM configurations were qualified against them. If a bill of materials names 800 GB, this is the part; substituting 960 GB changes the write budget by 54% and the random write by two thirds.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Class |
|---|---|---|---|---|---|
| Micron M510DC 800 GB | 800 GB | 420 / 380 MB/s | 65K / 30K IOPS | 2,500 TB (1.7 DWPD) | Read-intensive, 16nm MLC |
| Micron M510DC 960 GB | 960 GB | 420 / 380 MB/s | 65K / 10.5K IOPS | 1,140 TB (0.65 DWPD) | Same family, larger capacity |
| Micron M510DC 600 GB | 600 GB | 420 / 380 MB/s | 65K / 40K IOPS | 3,800 TB (3.5 DWPD) | Same family, smaller capacity |
| Micron M510DC 480 GB | 480 GB | 420 / 380 MB/s | 63K / 23K IOPS | 1,850 TB (2.1 DWPD) | Same family |
| Samsung SM883 960 GB | 960 GB | 540 / 520 MB/s | 97K / 29K IOPS | 5,256 TB (3.0 DWPD) | Mixed-use, MLC |
| Samsung PM893 960 GB | 960 GB | 550 / 520 MB/s | 98K / 30K IOPS | 1,752 TB (1.0 DWPD) | Read-intensive, TLC |
| Samsung PM883 960 GB | 960 GB | 550 / 520 MB/s | 98K / 25K IOPS | 1,366 TB (0.78 DWPD) | Read-intensive, TLC |
The four M510DC rows are one family and they show a curve rather than a ladder: endurance peaks at 600 GB and falls either side of it, while sequential read and write stay at 420/380 across the top four capacities. Among the three 960 GB Samsung rows, only the mixed-use SM883 carries more write budget than this drive, and it does so on 20% more bytes with a 40 MB/s advantage on sequential write; the two read-intensive parts carry 30% and 45% less.
So the case for 800 GB is narrow and specific: a volume between 600 and 960 GB of usable space that is written to, but not at two full fills a day. Below that write rate this drive has the most endurance per byte in the upper half of the range; above it, the 600 GB part is the correct device and the capacity requirement has to be met with a second drive rather than a larger one.
Every drive carries a 1-year warranty from us against defects in workmanship and function. Verified faulty units are replaced or refunded and we cover return shipping. Stock is held in both new and used condition; the condition you order is confirmed before dispatch, and used units are pull-tested rather than untested lots. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch.
This capacity is quoted rather than listed, because price moves with condition, quantity and batch. Send the quantity, the condition you need and the platform the drives are going into, and you will get a quote with lead time the same working day. If the host uses TCG Enterprise key management, say so when you enquire and we will confirm the drive's security state before it ships; matched sets for a mirror or a parity group are selected from a single batch where stock allows, including firmware revision and wear level.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV