Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZWLO7T6HBLA · Samsung

Samsung PM1743 7.68TB PCIe 5.0 NVMe U.2 SSD (MZWLO7T6HBLA)

7.68 TB 2.5-inch U.2 NVMe SSD, PCIe 5.0, ordering code MZWLO7T6HBLA-00A07

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZWLO7T6HBLA
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 7.68 TB
Interface NVMe
Form Factor U.2 15mm
PCIe Version PCIe 5.0
NAND Type TLC
Endurance (DWPD) 1
TBW 14,016 TB
Sequential Read 14,000 MB/s
Sequential Write 6,000 MB/s
Random Read IOPS 2,500K IOPS
Random Write IOPS 300K IOPS
Power 23 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption AES-XTS 256
Condition New · Used

Frequently Asked Questions

Only marginally. Random write goes from 280K to 300K IOPS; sequential read, sequential write and random read are the same. The capacity doubles and the lifetime total doubles, the speed does not.

Samsung rates sustained random read at 60 microseconds up to 7.68 TB and 90 microseconds at 15.36 TB, because there is more flash to address behind the same channel count. That is about 11.1K single-threaded read IOPS instead of 16.7K.

On a PCIe 5.0 slot with a 32 GT/s backplane. On Gen4 the drive negotiates down to roughly 7,500 MB/s read, while sequential write stays at 6,000 MB/s because that figure is limited by the flash rather than the link.

Yes. The PM893 at 7.68 TB carries the identical 14,016 TB and one drive write a day. Endurance is not what the Gen5 interface buys; throughput is.

At 500 MB/s of sustained rebuild throughput, 7.68 TB takes about four and a quarter hours. Check that against the redundancy level rather than against the capacity figure.

Both are stocked. Used drives are server pulls tested for media wear, capacitor health and firmware revision, then sanitised, and the one-year cover is identical.

Samsung PM1743 7.68 TB, 2.5-inch U.2 at 15 mm, catalogue code MZWLO7T6HBLA, ordering code MZWLO7T6HBLA-00A07. 14,000 MB/s sequential read and 6,000 MB/s write on PCIe 5.0 x4, 2,500K random read and 300K random write IOPS, 14,016 TBW at one drive write a day for five years. 128-layer V-NAND TLC, NVMe 1.4, 23 W reading and 21.1 W writing. Sealed drives and server pulls both stocked.

The largest capacity in this family that still answers a single request in 60 microseconds. Go up one more step and the read latency becomes 90 — a detail that never appears in a quote comparison and changes how a database feels.

The last capacity before latency slips

Samsung rates sustained random read latency at 60 µs for 1.92, 3.84 and 7.68 TB, then 90 µs for 15.36. Write latency stays at 20 µs throughout. At one request at a time, 60 µs corresponds to roughly 16.7K IOPS and 90 µs to about 11.1K, so the top capacity gives back a third of its single-threaded read throughput to gain density.

Nothing in the bandwidth column shows that. Both drives quote 2,500K random read, because that figure is measured across a queue deep enough to hide the latency. A quote sheet listing only bandwidth and IOPS will call these two drives equal; a workload built on dependent reads will not.

Technical specifications

Product familySamsung PM1743 (PCIe 5.0 enterprise NVMe SSD, 1 DWPD)
PNMZWLO7T6HBLA (catalogue code)
Ordering codeMZWLO7T6HBLA-00A07
Capacity7.68 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch U.2, 15 mm (100.2 × 69.85 × 15 mm, about 190 g)
InterfacePCIe 5.0 x4, NVMe 1.4, backwards compatible with PCIe 4.0 and 3.0
NANDSamsung V-NAND TLC (6th generation, 128-layer)
Sequential read14,000 MB/s
Sequential write6,000 MB/s
Random 4K read2,500K IOPS
Random 4K write300K IOPS
Endurance (TBW)14,016 TB
Endurance (DWPD)1 drive write per day for five years
Latency60 µs random read, 20 µs random write (99th percentile 90 / 20 µs)
Power23 W typical read, 21.1 W typical write, 5 W idle (12 V rail)
Power-loss protectionYes, capacitor-backed, with end-to-end data protection
EncryptionAES-XTS 256-bit, TCG Opal 2.0 compliant
MTTF2.5 million hours

Twice the capacity, the same speed

Compare the numbers against the 3.84 TB drive and only one of them moved: random write goes from 280K to 300K, seven percent. Sequential read, sequential write and random read are identical, because read throughput is already at what four Gen5 lanes can carry and the write path is set by the controller rather than by the amount of flash behind it.

So doubling capacity here buys space and lifetime, not speed, and a purchasing case built on performance will not survive contact with a benchmark. The honest version is simpler: if 3.84 TB per drive is enough, this one is not faster, it is just fewer drives in the same chassis.

Fourteen petabytes, one drive write a day

14,016 TB is 7.68 TB of host writes every day for five years, which is twice the 3.84 TB part and four times the 1.92 TB part. The per-day figure never changes across the family — the lifetime total scales because the capacity does, and the warranty budget is a fixed one drive write a day.

At this size that budget is generous enough to be irrelevant for most hosts. A server writing 2 TB a day — already a heavily written machine — would need nineteen years to exhaust the rating. What limits this drive in practice is capacity planning and rebuild time, not endurance.

Four drives at 7.68 TB, one endurance column

ModelInterfaceCapacitySeq read / writeRandom 4 KBTBWDWPD
PM1743 7.68 TBPCIe 5.0 x47.68 TB14,000 / 6,000 MB/s2,500K / 300K14,016 TB1
PM1733a 7.68 TBPCIe 4.0 x47.68 TB7,500 / 4,100 MB/s1,600K / 170K14,016 TB1
PM1733 7.68 TBPCIe 4.0 x47.68 TB7,000 / 3,500 MB/s1,450K / 135K14,016 TB1
PM893 7.68 TBSATA 6 Gb/s7.68 TB550 / 520 MB/s98K / 30K14,016 TB1

Four drives, two interfaces, one endurance column: 14,016 TB and one drive write a day in all four rows. The SATA part at the bottom carries the same lifetime budget as the Gen5 part at the top, and gives up about twenty-five times the sequential read and the same order of magnitude in random read to get there. Anyone buying this capacity for write endurance should notice they are already holding it in a SATA drive; what Gen5 adds is throughput, not budget.

Twenty-three watts, three watts per terabyte

Read power is 23 W, write 21.1 W, idle 5 W. Twenty-four of these in a shelf is 552 W under read load and 184 TB of raw capacity, or three watts per terabyte. Fill the same shelf with the 3.84 TB version and it is 502 W for 92 TB, closer to 5.4 W per terabyte — the density argument is a power argument as much as a slot argument.

Two physical cautions. The 15 mm carrier has no heat spreader, so the drive depends on chassis airflow at that wattage. And rebuilding one member of a set costs 7.68 TB of traffic: at 500 MB/s of real rebuild throughput that is about four and a quarter hours, which is the number to check against the redundancy the array can survive, not the capacity on the label.

Ordering codes: MZWLO with a letter O

CodeTypeCapacityConditionQuote
MZWLO7T6HBLACatalogue code7.68 TBNew / usedEnquire
MZWLO7T6HBLA-00A07Ordering code7.68 TBNew / usedEnquire

The fifth character is a letter O, not a zero, and it separates this family from the Gen4 one in a parts list: MZWLO is PM1743, MZWLJ is PM1733. Samsung lists -00B07 alongside -00A07 for this capacity; the difference is the distribution block rather than the hardware. The E3.S version carries MZ3LO and is 7.5 mm thick; the U.3 connector version sold to OEMs is MZWLR7T6HBLA.

Five checks worth running when a delivery arrives:

Warranty, lead time and purchasing

Both conditions carry a year of cover from us, and the cover travels with the drive rather than staying with the chassis it came out of. Warehouse stock normally turns round in three to seven working days, with tracking issued as it leaves. Minimum order is two pieces, the capacities in this family combine on a single order, and pricing follows once part number, condition and quantity are in hand.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View