Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MZWLJ7T6HALA · Samsung

Samsung PM1733 7.68TB PCIe 4.0 NVMe U.2 SSD (MZWLJ7T6HALA)

7.68 TB 2.5-inch U.2 NVMe SSD, PCIe 4.0, ordering code MZWLJ7T6HALA-00007

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MZWLJ7T6HALA
Brand
Samsung
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 7.68 TB
Interface NVMe
Form Factor U.2 15mm
PCIe Version PCIe 4.0
NAND Type TLC
Endurance (DWPD) 1
TBW 14,016 TB
Sequential Read 7,000 MB/s
Sequential Write 3,500 MB/s
Random Read IOPS 1,450K IOPS
Random Write IOPS 135K IOPS
Power 20 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption AES-XTS 256
Condition New · Used

Frequently Asked Questions

3,500 MB/s for this capacity. 3,800 belongs to the 3.84 TB part and gets copied down the range by distributors. Samsung's own platform table lists 3,500 here, and on a PCIe 3.0 host the figure is 3,200.

14,016 TB over five years, which is 7.68 TB of host writes a day. The rating is flat across the family, so the daily allowance scales with capacity rather than plateauing.

No. On PCIe 3.0 x4 you get 3,400 MB/s read and 3,200 write instead of 7,000 and 3,500, and random read drops from 1,450K to 800K. Random write stays at 135K on both.

Only a 15 mm bay. Every other 2.5-inch drive we list is 7 mm, so a thin carrier will not close and a shelf built for 7 mm drives takes half as many.

7,000/3,500 MB/s against 3,100/2,000, 1,450K/135K IOPS against 500K/55K, and 14,016 TB against 10,932 TB. On a Gen3 host the read gap shrinks to 300 MB/s but the endurance gap does not change.

Both are stocked. Used drives are pulled from working servers, checked for media wear, capacitor health and firmware, then sanitised. Cover is one year either way.

Samsung PM1733 7.68 TB, 2.5-inch U.2 at 15 mm, catalogue code MZWLJ7T6HALA, ordering code MZWLJ7T6HALA-00007. 7,000 MB/s sequential read and 3,500 MB/s write on a PCIe 4.0 host, 1,450K random read and 135K random write IOPS, 14,016 TBW at one drive write a day for five years. V-NAND TLC, PCIe 4.0 x4, NVMe 1.3, 20 W. Both conditions stocked, one-year warranty either way.

This is the capacity where the family stops getting quicker. From 1.92 to 3.84 TB the write side gained 1,400 MB/s and random read gained 700K IOPS; from 3.84 to 7.68 it loses 300 MB/s of write and 50K of random read, and the 15.36 TB part repeats the same numbers again. The dies are still there, but the controller has run out of places to put the work.

The first capacity that goes slightly backwards

On a PCIe 4.0 host, random read is 1,450K here against 1,500K at 3.84 TB, and sequential write is 3,500 against 3,800. Neither drop is large enough to change what the drive is for, but both are real and both are printed in Samsung's own platform table. The 15.36 TB part is identical to this one in every performance row, which is the clearest sign that the ceiling has been reached.

Quotes built from distributor pages may show 3,800 MB/s for this capacity, because 3,800 is the family's headline write figure and gets copied down the range. It belongs to the 3.84 TB part. We publish 3,500 for MZWLJ7T6HALA-00007, and if a supplier insists on 3,800 for a 7.68 TB unit, ask which datasheet revision they are reading from.

Technical specifications

Product familySamsung PM1733 (PCIe 4.0 enterprise NVMe SSD, 1 DWPD)
PNMZWLJ7T6HALA (catalogue code)
Ordering codeMZWLJ7T6HALA-00007
Capacity7.68 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch U.2, SFF-8639, 15 mm (100 × 70 × 15 mm)
InterfacePCIe 4.0 x4, dual-port x2, NVMe 1.3, backwards compatible with PCIe 3.0 x4
NANDSamsung V-NAND TLC (5th generation)
Sequential read7,000 MB/s on PCIe 4.0; 3,400 MB/s on PCIe 3.0
Sequential write3,500 MB/s on PCIe 4.0; 3,200 MB/s on PCIe 3.0
Random 4K read1,450K IOPS on PCIe 4.0; 800K on PCIe 3.0
Random 4K write135K IOPS on either host generation
Latency, random read / write100 µs / 25 µs
Latency, sequential read / write220 µs / 80 µs on PCIe 4.0; 250 µs / 100 µs on PCIe 3.0
Endurance (TBW)14,016 TB
Endurance (DWPD)1 drive write per day for five years
Power20 W typical read, 20 W typical write on a PCIe 4.0 host (15 W read on PCIe 3.0); 8.5 W idle; 22 W maximum
DRAM cacheYes
Power-loss protectionYes, capacitor-backed, with end-to-end data protection and surge handling
EncryptionAES-XTS 256-bit, TCG Opal 2.0 compliant
MTTF2 million hours

What 14,016 TB is per day

Fourteen petabytes does not mean much until it is divided: 14,016 TB over 1,825 days is 7.68 TB of host writes a day. Because the rating is a flat 1 DWPD, the daily figure scales with the drive — the 3.84 TB part gets 3.84 TB a day from the same rating, and the 15.36 TB part gets 15.36.

Against a read-intensive drive at this capacity the difference is larger than it looks. The PM983 7.68 TB carries 10,932 TB, or 5,990 GB a day. The gap is 3,084 TB, roughly 1.7 TB a day of extra headroom, for a drive that also writes 1,500 MB/s faster and reads at more than double the random rate.

Where 7.68 TB sits across the catalogue

ModelInterfaceCapacitySeq read / writeRandom 4 KBTBWDWPD
PM1733 7.68 TBPCIe 4.0 x47.68 TB7,000 / 3,500 MB/s1,450K / 135K14,016 TB1
PM983 7.68 TBPCIe 3.0 x47.68 TB3,100 / 2,000 MB/s500K / 55K10,932 TB0.78
PM893 7.68 TBSATA 6 Gb/s7.68 TB550 / 520 MB/s98K / 30K14,016 TB1
5210 ION 7.68 TBSATA 6 Gb/s7.68 TB540 / 360 MB/s90K / 4.5K11,200 TB0.8

The row worth staring at is the third one. The PM893, a SATA drive, carries exactly the same 14,016 TB as this NVMe part — same capacity, same 1 DWPD, same lifetime bytes. Moving to Gen4 NVMe buys 12.7 times the sequential read and 14.8 times the random read, and buys absolutely nothing on endurance. If the decision is being justified on lifetime writes, it is the wrong decision.

The fourth row is the other half of that argument. The 5210 ION is QLC, sits at 11,200 TB, and writes at 4.5K random — a fifth of this drive. It is a read-mostly archive part, and at this capacity the gap between the two is not a tuning difference but a different component.

Density, watts, and the shelf you already own

Twenty watts does not sound like much until it is multiplied by a backplane. Twenty-four of these is 480 W and 184 TB in a single 2U shelf, or 2.6 W per terabyte. The same shelf filled with the 1.92 TB part holds 46 TB at 15 W each, 360 W, which is 7.8 W per terabyte. Density is the argument for this capacity, and it is a threefold one.

The physical constraint has not changed. At 15 mm these will not close in a carrier built for 7 mm drives, and a chassis designed around thin carriers takes half as many. Check the bay depth before the datasheet: nothing in the specification will tell you what your shelf was built for.

Ordering codes and the HALA build

CodeTypeCapacityConditionQuote
MZWLJ7T6HALACatalogue code7.68 TBNew / usedEnquire
MZWLJ7T6HALA-00007Ordering code7.68 TBNew / usedEnquire

MZWL is the family in U.2, J the generation, 7T6 the capacity, HALA the build, -00007 the channel suffix. The build block does not follow the capacity in any obvious sequence: 1.92 TB is HBJR, 3.84 TB is HBLS, and both 7.68 TB and 15.36 TB are HALA. When two capacities share a build, the build cannot be used to tell them apart, so reading the capacity out of the model string, rather than off the label, is how drives get mixed up.

One number to expect from distributors: some list this drive at 14,020 TB. That is 14,016 rounded. The rating is exactly 1 DWPD on 7,680 GB for 1,825 days, which lands on 14,016, and that is the figure to put in a tender response.

What to check at goods-in

Warranty, lead time and purchasing

New and used both come with twelve months of cover from us, and it stays with the drive if it moves to another chassis. Warehouse stock normally ships inside three to seven working days with tracking issued at dispatch. We sell from two pieces, the four PM1733 capacities can be combined on one order, and pricing follows part number, condition and quantity — normally the same working day.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View