Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK3T8TGA · Micron

Micron 5400 PRO 3.84 TB SATA SSD (MTFDDAK3T8TGA)

3.84 TB 2.5-inch SATA SSD, ordering code MTFDDAK3T8TGA-1BC1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK3T8TGA
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 3.84 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1.5
TBW 10,512 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 95K IOPS
Random Write IOPS 30K IOPS
Power 3.8 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

Yes. MTFDDAK3T8TGA is stocked sealed and as tested pulls, and our one-year warranty is the same on both. Say which condition you want when you ask for a price.

No. The 1.5 drive-writes-a-day rating carries through from 240 GB to 3.84 TB, so the lifetime total doubles with capacity and lands at 10,512 TBW, which is 5.76 TB a day for five years. Only the 7.68 TB part steps down, to 0.65 DWPD and 9,110 TBW.

30K against 22K IOPS, the widest gap in the series, with write latency improved from roughly 350 to 210 microseconds. Endurance is a quarter higher at 10,512 TBW, so the 5400 wins on write responsiveness and on lifetime both.

Two. The 5200 PRO 3.84 TB rates 17,600 TBW at 2.5 drive writes a day on 64-layer NAND, and the 5300 MAX rates 24,528 TBW at 3.5. Both trade some write latency for the longer budget.

The suffix logic does, the block does not. -1BC15ABYY is TCG Opal 2 and -1BC16ABYY is TCG Enterprise, but all of them sit in a 1BC1 block, where a 5300 code carries 1AW1. Mixing the two will not pull the drive you ordered.

Warehouse stock normally dispatches within three to seven working days and tracking is issued at dispatch. Larger quantities are quoted with a stated lead time rather than an estimate.

Micron 5400 PRO 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK3T8TGA, ordering code MTFDDAK3T8TGA-1BC1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 30K random write IOPS at 4 KB, 10,512 TBW at 1.5 drive writes a day, on 176-layer 3D TLC with power-loss protection and TCG encryption options. Sealed drives and tested pulls are both stocked, each with a 1-year warranty from us.

Only one number changes between 1.92 TB and 3.84 TB in this family. The endurance multiplier holds at 1.5 drive writes a day, so the lifetime total doubles with capacity, from 5,256 to 10,512 TBW; it is the 7.68 TB part that finally steps down to 0.65. The random write rating does fall, from 33K to 30K IOPS, as the array of dies grows past what the controller schedules easily. Sequential performance is untouched at 540 and 520 MB/s.

Where this capacity genuinely improves on the 5300 PRO

The write IOPS gap is the widest in the whole series here: 30K against 22K on the 5300 PRO 3.84 TB, an eight thousand IOPS step that matters for log and journal volumes. Write latency improves in step, roughly 350 µs down to 210 µs. Endurance moves up as well: 10,512 TBW against 8,410 on the 5300 PRO, a quarter more lifetime bytes at the same 1.5 drive writes a day. If endurance is the only criterion, the 5200 PRO at this size still rates 17,600 TBW, two thirds more, on older NAND.

Technical specifications

Product familyMicron 5400 PRO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK3T8TGA (catalogue code)
Ordering codeMTFDDAK3T8TGA-1BC1ZABYY
Capacity3.84 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, hot-plug capable, NCQ to depth 32
NANDMicron 176-layer 3D TLC
Sequential read540 MB/s (128 KB, steady state)
Sequential write520 MB/s (128 KB, steady state)
Random 4K read95K IOPS (steady state)
Random 4K write30K IOPS (steady state)
Endurance (TBW)10,512 TB
Endurance (DWPD)1.5 drive writes per day for five years
Quality of service170 µs read / 210 µs write at 99.9 percent, queue depth 1
Power (read / write)2.8 W read / 3.8 W write active average, 1.5 W idle
DRAM cacheYes, power-loss protected
Power-loss protectionYes, capacitor-backed plus end-to-end data path protection
EncryptionAES 256-bit, TCG Enterprise and TCG Opal builds
MTTF3 million device hours
Weight< 70 g

What 10,512 TBW means day to day

Divided across five years that is 5.76 TB written per day, 1.5 times the drive capacity. Compare it with the smaller 1.92 TB part, which allows 2.88 TB a day: the budget doubles exactly, because the multiplier is the same 1.5 and the capacity doubles with it. For a host that writes a fixed volume each day, the 3.84 TB therefore lasts twice as long in wall-clock terms, which is the number most buyers actually care about.

Ordering codes and the security block

CodeTypeConditionQuote
MTFDDAK3T8TGACatalogue code (bare PN)new or usedEnquire
MTFDDAK3T8TGA-1BC1ZABYYStandard (non-SED)new or usedEnquire
MTFDDAK3T8TGA-1BC15ABYYTCG Opal 2 SEDnew or usedEnquire
MTFDDAK3T8TGA-1BC16ABYYTCG Enterprise SEDnew or usedEnquire

The 1BC1 block marks this as a 5400-generation drive; 5300 parts carry 1AW1 in that position and the two never substitute. The character immediately before ABYY picks the security build — Z plain, 5 TCG Opal 2, 6 TCG Enterprise — and everything else in the string is fixed by Micron.

How the 3.84 TB lines up with the rest of the range

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5300 PRO 3.84 TB3.84 TB540 / 520 MB/s95K / 22K IOPS8,410 TB (1.2 DWPD)2.5 / 3.8 WRead-intensive, 96-layer TLC
Micron 5400 PRO 3.84 TB3.84 TB540 / 520 MB/s95K / 30K IOPS10,512 TB (1.5 DWPD)2.8 / 3.8 WRead-intensive, 176-layer TLC
Micron 5200 PRO 3.84 TB3.84 TB540 / 520 MB/s95K / 24.5K IOPS17,600 TB (2.5 DWPD)3.6 WRead-intensive, 64-layer TLC
Micron 5300 MAX 3.84 TB3.84 TB540 / 520 MB/s95K / 34K IOPS24,528 TB (3.5 DWPD)3.0 / 3.9 WMixed-use, 96-layer TLC

The read columns are identical in all four rows because the SATA interface caps them, so compare endurance and random write instead. Two rows above deliberately break the pattern: the 5200 PRO still carries more lifetime bytes than this drive on 64-layer NAND, and the 5300 MAX is a mixed-use product rated for 3.5 drive writes a day. Datasheet figures at 128 KB sequential or 4 KB random, steady state, with power shown as one typical figure where only one is published.

Testing routine for a 3.84 TB drive

A full-span write on this capacity takes hours, so the bench records start and end SMART rather than sampling in the middle. Identity comes first: model, firmware and capacity are read back and compared with the label, since relabelled high-capacity drives are the failure that no health attribute reveals. Pulls then get a complete write-read pass and a capacitor discharge test; sealed drives are left untouched until dispatch. Every unit leaves with the test note for its own serial.

Warranty, lead time and purchasing

Our one-year cover applies to sealed and pulled drives equally and follows the drive rather than the server it shipped in. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch. Minimum order is two pieces, capacities within one series combine on a single order, and quotes are returned the same working day once part number, condition and quantity are stated.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View