Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK3T8TDS · Micron

Micron 5300 PRO 3.84 TB SATA SSD (MTFDDAK3T8TDS)

3.84 TB 2.5-inch SATA SSD, ordering code MTFDDAK3T8TDS-1AW1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK3T8TDS
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 3.84 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 1.2
TBW 8,410 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 95K IOPS
Random Write IOPS 22K IOPS
Power 3.8 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

Both are held. Sealed new drives and tested pulls of MTFDDAK3T8TDS are quoted with a one-year warranty from us; name the condition you want and the quote returns on that basis.

The DWPD figure drops to 1.2 at 3.84 TB because Micron keeps the total near 8,410 TB rather than scaling writes per day with capacity. In absolute terms it still allows 4.61 TB a day, which is more than the 2.88 TB a day of the 1.92 TB part.

The 5200 PRO is rated 17,600 TBW at 2.5 DWPD, more than twice the endurance of this drive, with 24K random write against 22K. Where endurance is the deciding factor the older drive wins at this capacity; the 5300 PRO brings 96-layer NAND and lower active power.

A 2.5-inch, 7 mm, SATA 6 Gb/s drive with hot-plug support, so it fits a standard 2.5-inch bay or a 3.5-inch caddy adapter. It is not PCIe, NVMe or U.2 and will not fit an M.2 slot.

Stock is held in our own warehouse and normally dispatches within three to seven working days; tracking is issued at dispatch. Quantities above stock are quoted with a lead time rather than an estimate.

MTFDDAK3T8TDS-1AW1ZABYY is the plain drive, -1AW15ABYY is TCG Opal 2 and -1AW16ABYY is TCG Enterprise. The bare MTFDDAK3T8TDS is accepted on an order and is what most buyers use.

Micron 5300 PRO 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK3T8TDS, ordering code MTFDDAK3T8TDS-1AW1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 22K random write IOPS at 4 KB, 8,410 TBW at 1.2 drive writes a day for five years, on Micron 96-layer 3D TLC with capacitor-backed power-loss protection and TCG Enterprise encryption. Supplied as sealed new drives or as tested pulls, each with a 1-year warranty from us.

Capacity doubles from 1.92 TB here but the endurance rating steps down rather than up, from 1.5 to 1.2 drive writes a day: Micron holds the absolute figure near eight petabytes instead of scaling DWPD with capacity. The daily allowance still rises to 4.61 TB, so a host writing two or three terabytes a day remains well inside the rating.

Why the endurance rating steps down at 3.84 TB

Read the two numbers side by side and the shape of the line becomes clear. The 1.92 TB part allows 2.88 TB a day at 1.5 DWPD; this one allows 4.61 TB a day at 1.2 DWPD. Absolute write headroom grows by 60 percent while the relative rating falls, because the capacity grew by 100 percent. If a platform team sizes by DWPD alone they will read this as a downgrade; if they size by terabytes written per day, which is what the drive actually absorbs, it is an upgrade. Random write falls to 22K for the same reason it has fallen at every step, and read stays at 95K.

Technical specifications

Product familyMicron 5300 PRO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK3T8TDS (catalogue code)
Ordering codeMTFDDAK3T8TDS-1AW1ZABYY
Capacity3.84 TB (3,840 GB unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 96-layer 3D TLC
Sequential read540 MB/s (128 KB, steady state)
Sequential write520 MB/s (128 KB, steady state)
Random 4K read95K IOPS (steady state)
Random 4K write22K IOPS (steady state)
Endurance (TBW)8,410 TB
Endurance (DWPD)1.2 drive writes per day for five years
Quality of service175 µs read / 350 µs write
Power (read / write)2.5 / 3.8 W typical; 1.5 W idle
DRAM cacheYes, LPDDR4, power-loss protected
Power-loss protectionYes, capacitor-backed for data in flight
EncryptionAES 256-bit, TCG Enterprise configurability
MTTF3 million device hours
Weight< 70 g

What 8,410 TBW means at 3.84 TB

8,410 TB over 1,825 days is 4.61 TB written every day for five years. Measured against the 5200 ECO at this capacity, rated 7,700 TB, it is 710 TB more — about 150 further days at that rate — and against the 5100 ECO, 6,400 TB, roughly a third again. One row goes the other way: the 5200 PRO quotes 17,600 TB at 2.5 DWPD here, more than twice this budget, so a buyer whose workload sits near that ceiling should take the older drive rather than this one.

For a media cache or a backup landing zone the difference rarely matters; both ratings sit far above what a sequential write stream consumes, because the rating is measured on 100 percent random 4K writes, the harshest pattern Micron tests.

Ordering codes and the security block

CodeTypeConditionQuote
MTFDDAK3T8TDSCatalogue code (bare PN)new or usedEnquire
MTFDDAK3T8TDS-1AW1ZABYYStandard (non-SED)new or usedEnquire
MTFDDAK3T8TDS-1AW15ABYYTCG Opal 2 SEDnew or usedEnquire
MTFDDAK3T8TDS-1AW16ABYYTCG Enterprise SEDnew or usedEnquire

Four codes are quoted at this capacity. In the trailing block Z is the plain drive, 5 is TCG Opal 2 and 6 is TCG Enterprise, so the suffix on the order line settles the security build. All four are available new or as a tested pull.

How the 3.84 TB compares across the 3.84 TB class

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 ECO 3.84 TB3.84 TB540 / 520 MB/s93K / 18K IOPS6,400 TB (0.9 DWPD)6 WRead-intensive, 32-layer TLC
Micron 5200 ECO 3.84 TB3.84 TB540 / 520 MB/s95K / 17K IOPS7,700 TB (1.1 DWPD)3.6 WRead-intensive, 64-layer TLC
Micron 5300 PRO 3.84 TB3.84 TB540 / 520 MB/s95K / 22K IOPS8,410 TB (1.2 DWPD)2.5 / 3.8 WRead-intensive, 96-layer TLC
Micron 5200 PRO 3.84 TB3.84 TB540 / 520 MB/s95K / 24.5K IOPS17,600 TB (2.5 DWPD)3.6 WRead-intensive, 64-layer TLC

Numbers follow Micron datasheet values at 128 KB sequential and 4 KB random, steady state, and the three older rows are copied from pages already on this site. The 5100 ECO row comes from a 2015 platform two NAND generations back, so its 6 W figure is the cost of 32-layer NAND rather than a property of the capacity.

How each drive is tested before it ships

At 3.84 TB the bench cycle is long enough to be a real test rather than a formality: the whole span is written end to end and read back, which is several hours of sustained write, with SMART captured at both ends and the capacitors discharged and re-tested. Sustained-write throttling, the failure mode that matters on a capacity this size, shows up during that pass. Sealed drives ship sealed; pulls are wiped and verified before dispatch.

Warranty, lead time and purchasing

Cover runs for one year on both conditions, and it comes from us rather than through a manufacturer return. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from the same series combine on one order, and a quote is turned round the same working day once part number, condition and quantity are clear.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View