Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK3T8TDT · Micron

Micron 5300 MAX 3.84 TB SATA SSD (MTFDDAK3T8TDT)

3.84 TB 2.5-inch SATA SSD, ordering code MTFDDAK3T8TDT-1AW1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK3T8TDT
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 3.84 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 3.5
TBW 24,528 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 95K IOPS
Random Write IOPS 34K IOPS
Power 3.9 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

Both are stocked. Sealed drives and tested pulls of MTFDDAK3T8TDT are covered by a one-year warranty from us; say which condition you need and the quote returns on that basis.

Because the total write budget is capped rather than scaled. 24,528 TB over five years at 3.84 TB works out to 3.5 drive writes a day, whereas the smaller MAX capacities reach 5. Absolute endurance here is still the highest in the 5300 line.

Yes, 34K IOPS against 70K at 1.92 TB and 75K at 960 GB. The same queue is spread across more dies at this size. If a workload is bound on write IOPS, the smaller MAX capacities are the better fit.

The 5200 PRO is rated 17,600 TBW at 2.5 DWPD with 24.5K random write. This drive carries 24,528 TBW at 3.5 DWPD and 34K random write, so it wins on both, on 96-layer NAND.

It is a 2.5-inch, 7 mm, hot-plug SATA 6 Gb/s drive, so a 2.5-inch bay or a 3.5-inch caddy adapter holds it. It is not PCIe, NVMe or U.2 and will not fit an M.2 slot.

Stock is held in our own warehouse and normally dispatches within three to seven working days; tracking is issued at dispatch. Volumes beyond stock are quoted with a lead time rather than an estimate.

Micron 5300 MAX 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK3T8TDT, ordering code MTFDDAK3T8TDT-1AW1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 34K random write IOPS at 4 KB, 24,528 TBW — 3.5 drive writes a day for five years — on Micron 96-layer 3D TLC, with power-loss protection and TCG Enterprise encryption. Available as new sealed drives or tested pulls, each with a 1-year warranty from us.

This is the highest endurance rating in the entire 5300 line: 24,528 TB, more than the 7.68 TB PRO quotes at nearly twice the capacity. It is also where the MAX family stops holding 5 drive writes a day — at 3.84 TB the DWPD settles at 3.5 because Micron caps total writes near 24.5 PB rather than scaling the rating with capacity.

The two curves cross at this capacity

Endurance reaches its family maximum here while write IOPS reaches its family minimum: 34K random write, against 70K at 1.92 TB and 75K at 960 GB. Neither number is a defect. The same controller queue is spread across more dies, and the endurance budget is set by how long the dies are expected to last, not by how many IOs they can answer at once. If a host needs write IOPS it should take the 960 GB or 1.92 TB MAX; if it needs capacity with a long write budget in one 7 mm bay, this is the row.

Technical specifications

Product familyMicron 5300 MAX (SATA NAND Flash SSD, mixed-use data centre)
PNMTFDDAK3T8TDT (catalogue code)
Ordering codeMTFDDAK3T8TDT-1AW1ZABYY
Capacity3.84 TB (3,840 GB unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32
NANDMicron 96-layer 3D TLC
Sequential read540 MB/s (128 KB, steady state)
Sequential write520 MB/s (128 KB, steady state)
Random 4K read95K IOPS (steady state)
Random 4K write34K IOPS (steady state)
Endurance (TBW)24,528 TB
Endurance (DWPD)3.5 drive writes per day for five years
Quality of service175-200 µs read / 100-650 µs write
Power (read / write)3.0 W read / 3.9 W write maximum; 1.5 W idle
DRAM cacheYes, LPDDR4, power-loss protected
Power-loss protectionYes, capacitor-backed for data in flight
EncryptionAES 256-bit, TCG Enterprise configurability
MTTF3 million device hours
Weight< 70 g

What 24,528 TBW means at 3.84 TB

24,528 TB over 1,825 days is 13.4 TB written every day for five years, 3.5 times the drive's own capacity. Against the 5200 PRO at this size, 17,600 TB, the margin is 6,928 TB, or about 515 more days at that daily rate; against the 5300 PRO, 8,410 TB, it is close to three times the budget. No other SATA drive on this site quotes a higher total at 3.84 TB.

That figure assumes 100 percent random 4K writes at steady state, which is the harshest pattern Micron tests. A drive used as a cache or a journal mixes sequential traffic in, consumes the budget more slowly, and in practice retires on a refresh cycle rather than on endurance.

Ordering codes and the security block

CodeTypeConditionQuote
MTFDDAK3T8TDTCatalogue code (bare PN)new or usedEnquire
MTFDDAK3T8TDT-1AW1ZABYYStandard (non-SED)new or usedEnquire
MTFDDAK3T8TDT-1AW15ABYYTCG Opal 2 SEDnew or usedEnquire
MTFDDAK3T8TDT-1AW16ABYYTCG Enterprise SEDnew or usedEnquire

Four codes cover this capacity. The trailing block is the security build — Z plain, 5 TCG Opal 2, 6 TCG Enterprise — and all four are available new or as a tested pull on the same lead time.

How the 3.84 TB MAX compares across the 3.84 TB class

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5100 ECO 3.84 TB3.84 TB540 / 520 MB/s93K / 18K IOPS6,400 TB (0.9 DWPD)6 WRead-intensive, 32-layer TLC
Micron 5300 PRO 3.84 TB3.84 TB540 / 520 MB/s95K / 22K IOPS8,410 TB (1.2 DWPD)2.5 / 3.8 WRead-intensive, 96-layer TLC
Micron 5200 PRO 3.84 TB3.84 TB540 / 520 MB/s95K / 24.5K IOPS17,600 TB (2.5 DWPD)3.6 WRead-intensive, 64-layer TLC
Micron 5300 MAX 3.84 TB3.84 TB540 / 520 MB/s95K / 34K IOPS24,528 TB (3.5 DWPD)3.0 / 3.9 WMixed-use, 96-layer TLC

Each row is a Micron datasheet value at 128 KB sequential and 4 KB random, steady state, with the three other rows drawn from pages already catalogued here. Power is reported inconsistently across the class — single typical numbers for the 5100 and 5200 entries, separate read and write maxima for the 5300 — so treat that column as an envelope.

How each drive is tested before it ships

A 3.84 TB unit spends the better part of a day on the bench before it is cleared: identification and firmware read at power-up, the full span written and read back, SMART logged at both ends, capacitors discharged and re-tested. The long write is deliberate, because sustained-write throttling and thermal behaviour are the failure modes that a quick self-test hides at this capacity. Sealed drives ship sealed; pulls are wiped and verified before dispatch.

Warranty, lead time and purchasing

One year of cover applies to new and used alike, and it comes from us rather than through a manufacturer return. Stock sits in our own warehouse and normally dispatches within three to seven working days, with tracking issued at that point. Minimum order is two pieces, capacities from one series combine on an order, and a quote is answered the same working day once part number, condition and quantity are clear.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View