3.84 TB 2.5-inch SATA SSD, ordering code MTFDDAK3T8TDD-1AT1ZABYY
| Capacity | 3.84 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 2.5 |
| TBW | 17,600 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 95K IOPS |
| Random Write IOPS | 24.5K IOPS |
| Power | 3.6 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5200 PRO 3.84 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK3T8TDD, ordering code MTFDDAK3T8TDD-1AT1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 95K random read and 24.5K random write IOPS at 4 KB, 17,600 TBW — 2.5 drive writes a day for five years — on Micron 64-layer 3D TLC, with capacitor-backed power-loss protection and TCG Enterprise encryption. Stocked as new sealed drives or as tested pulls, both with a 1-year warranty from us.
The 3.84 TB model is where the PRO line stops being a small-volume part: 17,600 TBW is almost eight times the 960 GB rating, and 2.5 drive writes a day is the highest endurance quoted anywhere in the 5200 PRO line. Random write, at 24.5K IOPS, is the one figure that steps back from the smaller models.
Two of the three 5200 PRO capacities sit at or below 1.92 TB. At 3.84 TB the drive is specified against the same workloads as a mixed-use part but keeps TLC read-intensive pricing, which is why it is usually bought in pairs for mirrored application storage.
| Product family | Micron 5200 PRO (SATA NAND Flash SSD, read-intensive data centre) |
|---|---|
| PN | MTFDDAK3T8TDD (catalogue code) |
| Ordering code | MTFDDAK3T8TDD-1AT1ZABYY |
| Capacity | 3.84 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, ATA-8 ACS-3, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 64-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 95K IOPS (steady state) |
| Random 4K write | 24.5K IOPS (steady state) |
| Endurance (TBW) | 17,600 TB |
| Endurance (DWPD) | 2.5 drive writes per day for five years |
| Quality of service | 200 µs read / 300 µs write |
| Power (read / write) | 3.0 / 3.6 W typical; 1.5 W idle |
| DRAM cache | Yes, LPDDR3/LPDDR4 with power-loss protection |
| Power-loss protection | Yes, capacitor-backed for data in flight |
| Encryption | AES 256-bit, TCG Enterprise configurability |
| MTTF | 3 million device hours |
| Weight | < 70 g |
Endurance is quoted as total bytes written over a five-year service life, so 17,600 TB spread across 1,825 days is roughly 9.6 TB of writing every day, or 2.5 times the drive's own capacity. In practice that is a nightly backup plus a working set that churns: the number to watch is not the average but the peak, which is why a write-heavy volume should be sized on the DWPD rating rather than the terabyte count.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK3T8TDD | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK3T8TDD-1AT1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK3T8TDD-1AT16ABYY | TCG Enterprise SED | new or used | Enquire |
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5200 PRO 960 GB | 960 GB | 540 / 520 MB/s | 95K / 32K IOPS | 2,270 TB (1.3 DWPD) | 3.0 / 3.6 W | Read-intensive, 1.3-2.5 DWPD |
| Micron 5200 PRO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 32K IOPS | 5,950 TB (1.7 DWPD) | 3.0 / 3.6 W | Read-intensive, 1.3-2.5 DWPD |
| Micron 5200 PRO 3.84 TB | 3.84 TB | 540 / 520 MB/s | 95K / 24.5K IOPS | 17,600 TB (2.5 DWPD) | 3.0 / 3.6 W | Read-intensive, 1.3-2.5 DWPD |
Every row is a 5200 PRO capacity measured by Micron at 128 KB steady state, which is what makes the 3.84 TB figures comparable with the smaller drives in the same table. Cross-generation numbers are left out for the same reason: different conditions, different story.
Before a 3.84 TB drive is boxed it runs a full pass on our bench: firmware identification, a complete write across the addressable range, read-back verification and a SMART snapshot at both ends. The capacitors behind power-loss protection are tested as part of that pass. Drives with grown defects or reallocated sectors are scrapped, not resold. Sealed stock ships as received, used stock is wiped to a clean state.
Our own one-year warranty applies to both conditions, independent of any Micron cover that remains. Because the stock is in our warehouse, normal dispatch is within three to seven working days and tracking is issued when it leaves. Two pieces is the floor, capacities can be mixed on one order, and quoted prices come back the same working day. Quote requests need the part number, condition and quantity.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV