1.92 TB 2.5-inch U.2 NVMe SSD, PCIe 5.0, ordering code MZWLO1T9HCJR-00A07
| Capacity | 1.92 TB |
|---|---|
| Interface | NVMe |
| Form Factor | U.2 15mm |
| PCIe Version | PCIe 5.0 |
| NAND Type | TLC |
| Endurance (DWPD) | 1 |
| TBW | 3,504 TB |
| Sequential Read | 14,000 MB/s |
| Sequential Write | 3,000 MB/s |
| Random Read IOPS | 2,000K IOPS |
| Random Write IOPS | 150K IOPS |
| Power | 19.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | AES-XTS 256 |
| Condition | New · Used |
Samsung PM1743 1.92 TB, 2.5-inch U.2 at 15 mm, catalogue code MZWLO1T9HCJR, ordering code MZWLO1T9HCJR-00A07. 14,000 MB/s sequential read and 3,000 MB/s write on PCIe 5.0 x4, 2,000K random read and 150K random write IOPS, 3,504 TBW at one drive write a day for five years. 128-layer V-NAND TLC, NVMe 1.4, 19.9 W read and 15.5 W write. Both conditions stocked, one-year warranty either way.
The first Gen5 drive in the catalogue, and the first one where the read figure is twice what the previous generation could do. 14,000 MB/s over four lanes, against 7,500 on Gen4 — but write only moves from 2,500 to 3,000, and endurance does not move at all. That ratio is the whole story of this generation, and it decides who should buy it.
Serial read bandwidth scales with the link, and Gen5 doubles the link. The write path does not: 3,000 MB/s here against 2,500 on the PM1733a at the same capacity, a 20 percent gain rather than a hundred. Random read doubles from 1,400K to 2,000K, random write goes from 100K to 150K.
That is what a lane upgrade buys: the queues fill faster, the sequential read moves with the bus, and everything that depends on program operations stays roughly where it was. A workload that scans, streams or loads model weights sees the difference immediately. A workload that writes does not, and is paying Gen5 prices for a 20 percent improvement.
| Product family | Samsung PM1743 (PCIe 5.0 enterprise NVMe SSD, 1 DWPD) |
|---|---|
| PN | MZWLO1T9HCJR (catalogue code) |
| Ordering code | MZWLO1T9HCJR-00A07 |
| Capacity | 1.92 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch U.2, 15 mm (100.2 × 69.85 × 15 mm, about 190 g) |
| Interface | PCIe 5.0 x4, NVMe 1.4, backwards compatible with PCIe 4.0 and 3.0 |
| NAND | Samsung V-NAND TLC (6th generation, 128-layer) |
| Sequential read | 14,000 MB/s |
| Sequential write | 3,000 MB/s |
| Random 4K read | 2,000K IOPS |
| Random 4K write | 150K IOPS |
| Endurance (TBW) | 3,504 TB |
| Endurance (DWPD) | 1 drive write per day for five years |
| Power | 19.9 W typical read, 15.5 W typical write, 5 W idle (12 V rail) |
| DRAM cache | Yes |
| Power-loss protection | Yes, capacitor-backed, with end-to-end data protection |
| Encryption | AES-XTS 256-bit, TCG Opal 2.0 compliant |
| MTTF | 2.5 million hours |
3,504 TB, one drive write a day for five years — identical to the Gen4 drive at this capacity and to the Gen3 drive before it. Three generations, three bus speeds, one endurance rating. That is not an oversight: the rating is a warranty budget, and Samsung has kept it fixed while the interface changed around it.
So the upgrade case for this drive cannot be endurance, and it cannot be cost per terabyte of writes. It is bandwidth, full stop. If a quote is being justified on lifetime writes, the PM1735 at three drive writes a day is the part to look at instead.
| Model | Interface | Capacity | Seq read / write | Random 4 KB | TBW | DWPD |
|---|---|---|---|---|---|---|
| PM1743 1.92 TB | PCIe 5.0 x4 | 1.92 TB | 14,000 / 3,000 MB/s | 2,000K / 150K | 3,504 TB | 1 |
| PM1733a 1.92 TB | PCIe 4.0 x4 | 1.92 TB | 7,500 / 2,500 MB/s | 1,400K / 100K | 3,504 TB | 1 |
| PM1733 1.92 TB | PCIe 4.0 x4 | 1.92 TB | 7,000 / 2,400 MB/s | 800K / 100K | 3,504 TB | 1 |
| 5400 MAX 1.92 TB | SATA 6 Gb/s | 1.92 TB | 540 / 520 MB/s | 94K / 63K | 17,520 TB | 5 |
Read the first three rows as one column: 3,504 TB three times. The only thing that changed across two generations is the interface, and the only row that buys more endurance is the SATA one at five drive writes a day.
A note on the fourth row that catches people out: 17,520 TB is five times the lifetime budget of a Gen5 drive at the same capacity, at 1/26th of the sequential read. Neither number is wrong, they answer different questions.
Read power is 19.9 W, write 15.5 — the write figure being lower is not a typo, it is what the drive draws when the read path is idle. Idle is 5 W, which is lower than any Gen4 drive we list. Twenty-four of them is 478 W reading in a shelf, within reach of a standard 2U backplane but not free.
The physical constraint is signal integrity rather than power. Gen5 at 32 GT/s needs a backplane designed for it; a Gen4 backplane will negotiate down and you will get roughly 7 GB/s, which is a Gen4 drive's performance for a Gen5 drive's price. The drive also runs hot enough that the 15 mm carrier matters: there is no heat spreader, and airflow has to be there.
| Code | Type | Capacity | Condition | Quote |
|---|---|---|---|---|
| MZWLO1T9HCJR | Catalogue code | 1.92 TB | New / used | Enquire |
| MZWLO1T9HCJR-00A07 | Ordering code | 1.92 TB | New / used | Enquire |
The fifth character is a letter O, not a zero, and it is the only thing separating this family from the Gen4 one in a parts list: MZWLO is PM1743, MZWLJ is PM1733. Typing a zero produces a part number that does not exist, and more than one purchase order has gone out with it.
The E3.S version of the same drive carries MZ3LO and is 7.5 mm thick rather than 15 — twice the density per rack unit, different bay, different thermal envelope. OEM blocks such as -00AD3 are Dell-branded units of that E3.S variant.
Sealed drives and tested pulls both come with a year of cover from us, and it follows the drive rather than the chassis. Warehouse stock normally ships inside three to seven working days, tracking issued at dispatch. Minimum order is two pieces, capacities in this family combine on one order, and a price follows part number, condition and quantity — usually the same working day.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV