1.92 TB 2.5-inch mixed-use SATA SSD, ordering code MTFDDAK1T9TGB-1BC1ZABYY
| Capacity | 1.92 TB |
|---|---|
| Interface | SATA |
| Form Factor | 2.5-inch 7mm |
| PCIe Version | Not applicable |
| NAND Type | TLC |
| Endurance (DWPD) | 5 |
| TBW | 17,520 TB |
| Sequential Read | 540 MB/s |
| Sequential Write | 520 MB/s |
| Random Read IOPS | 94K IOPS |
| Random Write IOPS | 63K IOPS |
| Power | 3.9 W |
| DRAM Cache | Yes |
| Power Loss Protection | Yes |
| Encryption | TCG Enterprise |
| Condition | New · Used |
Micron 5400 MAX 1.92 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK1T9TGB, ordering code MTFDDAK1T9TGB-1BC1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 94K random read and 63K random write IOPS at 4 KB, 17,520 TBW at five drive writes a day, on 176-layer 3D TLC with power-loss protection and TCG encryption builds. Both conditions stocked, each with a 1-year warranty from us.
This is where the mixed-use range earns its place: 17,520 TBW is 9.6 TB of written data every day for five years, and the capacity is large enough that a mirrored pair still leaves usable space after over-provisioning. Random read slips to 94K at this size, two thousand below the 960 GB member, which is the only performance number that moves as capacity doubles.
The pattern repeats: 5200 MAX, 5300 MAX and 5400 MAX all quote 17,520 TBW at 1.92 TB, and the newest drive is the slowest of the three on small-block writes, 63K against 70K on both predecessors. Random read also steps down to 94K where the older two hold 95K. Where this drive does lead is write latency, 120 µs at 99.9 percent, and the 176-layer platform. Buy on those two, or on price, rather than expecting an IOPS gain.
| Product family | Micron 5400 MAX (SATA NAND Flash SSD, mixed-use data centre) |
|---|---|
| PN | MTFDDAK1T9TGB (catalogue code) |
| Ordering code | MTFDDAK1T9TGB-1BC1ZABYY |
| Capacity | 1.92 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less) |
| Form factor | 2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm) |
| Interface | SATA 6 Gb/s, hot-plug capable, NCQ to depth 32 |
| NAND | Micron 176-layer 3D TLC |
| Sequential read | 540 MB/s (128 KB, steady state) |
| Sequential write | 520 MB/s (128 KB, steady state) |
| Random 4K read | 94K IOPS (steady state) |
| Random 4K write | 63K IOPS (steady state) |
| Endurance (TBW) | 17,520 TB |
| Endurance (DWPD) | 5 drive writes per day for five years |
| Quality of service | 170 µs read / 120 µs write at 99.9 percent, queue depth 1 |
| Power (read / write) | 3.0 W read / 3.9 W write active average |
| DRAM cache | Yes, power-loss protected |
| Power-loss protection | Yes, capacitor-backed plus end-to-end data path protection |
| Encryption | AES 256-bit, TCG Enterprise and TCG Opal builds |
| MTTF | 3 million device hours |
| Weight | < 70 g |
Seventeen and a half petabytes over 1,825 days is 9.6 TB written daily, five times the drive capacity. Compare the same capacity in the PRO tier, which allows 2.88 TB a day: the MAX is 3.3 times more write headroom for a workload that actually writes. Anything caching, journalling or holding temporary tables will sit far inside the MAX figure while sitting uncomfortably close to the PRO one.
| Code | Type | Condition | Quote |
|---|---|---|---|
| MTFDDAK1T9TGB | Catalogue code (bare PN) | new or used | Enquire |
| MTFDDAK1T9TGB-1BC1ZABYY | Standard (non-SED) | new or used | Enquire |
| MTFDDAK1T9TGB-1BC15ABYY | TCG Opal 2 SED | new or used | Enquire |
| MTFDDAK1T9TGB-1BC16ABYY | TCG Enterprise SED | new or used | Enquire |
The 1BC1 block identifies a 5400-generation drive; 5300 parts use 1AW1 in that position and the codes never interchange. Within the block, Z is the plain drive, 5 is TCG Opal 2 and 6 is TCG Enterprise.
| Model | Capacity | Sequential read / write | Random 4K read / write | Endurance | Power | Class |
|---|---|---|---|---|---|---|
| Micron 5400 PRO 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 33K IOPS | 5,256 TB (1.5 DWPD) | 3.0 / 3.6 W | Read-intensive, 176-layer TLC |
| Micron 5200 MAX 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 70K IOPS | 17,520 TB (5 DWPD) | 3.6 W | Mixed-use, 64-layer TLC |
| Micron 5300 MAX 1.92 TB | 1.92 TB | 540 / 520 MB/s | 95K / 70K IOPS | 17,520 TB (5 DWPD) | 3.0 / 3.9 W | Mixed-use, 96-layer TLC |
| Micron 5400 MAX 1.92 TB | 1.92 TB | 540 / 520 MB/s | 94K / 63K IOPS | 17,520 TB (5 DWPD) | 3.0 / 3.9 W | Mixed-use, 176-layer TLC |
Every row reads at the same 540 MB/s because SATA sets that ceiling; the columns that separate them are endurance and write IOPS. The PRO row shows a third of the write budget at the same capacity, and the two older MAX rows show that 70K write has been available at this endurance for two generations. Figures are datasheet values at 128 KB sequential or 4 KB random, steady state.
History first: power-on hours, host bytes written and media wear come off SMART before the drive is touched, since a used mixed-use unit is bought on remaining endurance rather than on age. The bench then runs a full-span write and read-back, discharges and measures the capacitors, and verifies capacity against the model string. Sealed stock is logged and kept sealed. Recorded figures ship with every unit.
One year of cover from us applies to sealed and pulled drives alike, and it follows the drive rather than the chassis it came out of. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued at dispatch. Minimum order is two pieces, capacities in a series combine on one order, and quotes are returned the same working day once part number, condition and quantity are stated.
Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.
15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV
7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07
3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07
1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV