Dispatch in 3–7 working days · 1-year warranty on every part Call A Rep: +86 13537510010 | Request A Quote
Inspected & Load-Tested Before Dispatch Serial Recorded Dispatch in 3–7 working days
MTFDDAK7T6TGA · Micron

Micron 5400 PRO 7.68 TB SATA SSD (MTFDDAK7T6TGA)

7.68 TB 2.5-inch SATA SSD, ordering code MTFDDAK7T6TGA-1BC1ZABYY

New Used
Pricing Request quote
MOQ 2 pc · volume pricing on request
Reply Within 24h
Volume Pricing
Worldwide Shipping
Secure Anti-Static Pack
Part Number
MTFDDAK7T6TGA
Brand
Micron
Category
Enterprise & Data Center SSD
Accepted Payments
T/T Bank Transfer PayPal Western Union

Technical Specifications

Capacity 7.68 TB
Interface SATA
Form Factor 2.5-inch 7mm
PCIe Version Not applicable
NAND Type TLC
Endurance (DWPD) 0.65
TBW 9,110 TB
Sequential Read 540 MB/s
Sequential Write 520 MB/s
Random Read IOPS 93K IOPS
Random Write IOPS 10.5K IOPS
Power 3.9 W
DRAM Cache Yes
Power Loss Protection Yes
Encryption TCG Enterprise
Condition New · Used

Frequently Asked Questions

Yes, MTFDDAK7T6TGA comes sealed and as tested pulls, with the same one-year warranty from us on either. Name the condition you want and the quote follows.

That is what Micron publishes for the 7.68 TB member of the family. At this density the controller schedules fewer concurrent operations per die set, so both random figures sit lower than the smaller drives: 93K read and 10.5K write instead of 95K and 33K.

On paper, marginally. Random read is 93K against 95K and random write 10.5K against 11K, with identical 9,110 TBW endurance. The 5400 wins on write latency, about 400 microseconds against 650, and on platform longevity. If raw IOPS at this capacity is the deciding factor, the older drive holds up.

If the workload is archival or backup landing where writes are large and sequential, yes: it carries 11,200 TBW and costs less per terabyte. Its sequential write tops out at 360 MB/s and random write at 4.5K IOPS, so anything transactional belongs on this drive instead.

No. Every code here is in the 1BC1 block, while 5300 parts use 1AW1 in the same position. Within the 5400 block, -1BC15ABYY is TCG Opal 2 and -1BC16ABYY is TCG Enterprise.

Warehouse stock normally dispatches within three to seven working days with tracking issued at dispatch. Larger volumes are quoted with a stated lead time, and part numbers can be mixed across one series on a single order.

Micron 5400 PRO 7.68 TB, 2.5-inch 7 mm SATA, catalogue code MTFDDAK7T6TGA, ordering code MTFDDAK7T6TGA-1BC1ZABYY. 540 MB/s sequential read, 520 MB/s sequential write, 93K random read and 10.5K random write IOPS at 4 KB, 9,110 TBW at 0.65 drive writes a day, on 176-layer 3D TLC with power-loss protection and TCG encryption builds. Sealed and pulled units are both available, each with a 1-year warranty from us.

This is the top of the PRO range and the only capacity where Micron quotes something other than 95K random read: at 7.68 TB the figure is 93K, and random write falls to 10.5K IOPS. Nothing about the write path scales at this density — the controller runs out of parallel scheduling long before the NAND runs out of die. Buy 7.68 TB for capacity in a single 7 mm slot, not for write throughput.

The one tier where the 5400 gives up IOPS to its predecessor

Stated plainly: at this capacity the 5400 PRO is marginally behind the 5300 PRO on both random metrics, 93K against 95K read and 10.5K against 11K write, while endurance is identical at 9,110 TBW and 0.65 drive writes a day. What does improve is write latency, roughly 650 µs down to 400 µs, plus the 176-layer platform and its longer availability. If those do not matter to you, the older drive is not worse here, and the 5210 ION carries a higher endurance rating for less money per terabyte at the cost of write speed.

Technical specifications

Product familyMicron 5400 PRO (SATA NAND Flash SSD, read-intensive data centre)
PNMTFDDAK7T6TGA (catalogue code)
Ordering codeMTFDDAK7T6TGA-1BC1ZABYY
Capacity7.68 TB (unformatted; 1 GB = 1 billion bytes, formatted capacity is less)
Form factor2.5-inch, 7 mm (100.45 × 69.85 × 7.00 mm)
InterfaceSATA 6 Gb/s, hot-plug capable, NCQ to depth 32
NANDMicron 176-layer 3D TLC
Sequential read540 MB/s (128 KB, steady state)
Sequential write520 MB/s (128 KB, steady state)
Random 4K read93K IOPS (steady state)
Random 4K write10.5K IOPS (steady state)
Endurance (TBW)9,110 TB
Endurance (DWPD)0.65 drive writes per day for five years
Quality of service170 µs read / 400 µs write at 99.9 percent, queue depth 1
Power (read / write)3.0 W read / 3.9 W write active average
DRAM cacheYes, power-loss protected
Power-loss protectionYes, capacitor-backed plus end-to-end data path protection
EncryptionAES 256-bit, TCG Enterprise and TCG Opal builds
MTTF3 million device hours
Weight< 70 g

What 9,110 TBW allows at 7.68 TB

Across 1,825 days that works out at 4.99 TB written per day. Note the shape of the curve across this series: the daily budget rises with capacity even where the DWPD multiplier falls, 4.61 TB at 3.84 TB and 4.99 TB here, because Micron caps lifetime bytes near 9 PB rather than letting it double each step. A host with a fixed daily write volume therefore gets a longer service life from the larger drive, which is the comparison most buyers should be making.

Ordering codes and the security block

CodeTypeConditionQuote
MTFDDAK7T6TGACatalogue code (bare PN)new or usedEnquire
MTFDDAK7T6TGA-1BC1ZABYYStandard (non-SED)new or usedEnquire
MTFDDAK7T6TGA-1BC15ABYYTCG Opal 2 SEDnew or usedEnquire
MTFDDAK7T6TGA-1BC16ABYYTCG Enterprise SEDnew or usedEnquire

All four codes sit in the 1BC1 block that marks a 5400-generation drive; the 5300 generation carries 1AW1 at that position and substituting one for the other will not pull the part you need. Just before ABYY, Z is plain, 5 is TCG Opal 2 and 6 is TCG Enterprise.

How the 7.68 TB compares with the other large Micron tiers

ModelCapacitySequential read / writeRandom 4K read / writeEndurancePowerClass
Micron 5200 ECO 7.68 TB7.68 TB540 / 520 MB/s95K / 9.5K IOPS8,400 TB (0.6 DWPD)3.6 WRead-intensive, 64-layer TLC
Micron 5300 PRO 7.68 TB7.68 TB540 / 520 MB/s95K / 11K IOPS9,110 TB (0.65 DWPD)3.9 WRead-intensive, 96-layer TLC
Micron 5400 PRO 7.68 TB7.68 TB540 / 520 MB/s93K / 10.5K IOPS9,110 TB (0.65 DWPD)3.9 WRead-intensive, 176-layer TLC
Micron 5210 ION 7.68 TB7.68 TB540 / 360 MB/s90K / 4.5K IOPS11,200 TB (0.8 DWPD)3.6 WQLC, capacity tier

The MAX tier has no 7.68 TB member, so the choice at this density is between the two PRO generations and the QLC capacity drive. The 5210 ION row shows exactly what QLC buys and costs: more endurance and a lower price per terabyte, but sequential write at 360 MB/s and random write at 4.5K IOPS, which rules it out of anything transactional. Datasheet figures at 128 KB sequential or 4 KB random, steady state.

How a 7.68 TB drive is validated here

At this density a full-span write runs for many hours, so it is scheduled rather than improvised. Identity is verified first — model string, firmware, sector count against the label — because capacity mislabelling is the one fault that health counters never show. Pulls then get the full write-read pass and a capacitor discharge test; sealed units stay sealed and ship with their factory packaging intact. The test note records serial, firmware and measured capacity for each drive.

Warranty, lead time and purchasing

One year of cover applies to sealed and pulled drives alike and sits with us, not with the server vendor the drive originally shipped inside. Stock is held in our own warehouse and normally dispatches within three to seven working days, with tracking issued when the parcel leaves. Minimum order is two pieces, capacities within one series combine on one order, and quotes go back the same working day once part number, condition and quantity are clear.

Get Pricing For This Part

Tell us who you are — we reply within one working day with a firm quote, stock status and lead time. Volume discounts available.

Prefer email? Write to sales@oceanserverparts.com or WhatsApp +86 13537510010.
Please tell us your name.
A valid email is required.
Need a full RFQ with multiple parts? Use The Full Form →

Related Products

Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 15.36TB E1.L NVMe SSD (MZEL215THBLA)

15.36 TB E1.L 1U long ruler NVMe SSD, PCIe 4.0, ordering code MZEL215THBLA-00AMV

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 7.68TB E1.S NVMe SSD (MZCL27T6HBLA)

7.68 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL27T6HBLA-00AMV / MZTL27T6HBLA-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 3.84TB E1.S NVMe SSD (MZCL23T8HCLS)

3.84 TB E1.S 1T NVMe SSD, PCIe 4.0, ordering codes MZCL23T8HCLS-00AMV / MZTL23T8HCLS-00A07

New Used
Request quote
MOQ 2 pc
View
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)
Samsung · Enterprise & Data Center SSD
Samsung PM9A3 1.92TB E1.S NVMe SSD (MZCL21T9HCJR)

1.92 TB E1.S 1T (9.5 mm) NVMe SSD, PCIe 4.0, ordering code MZCL21T9HCJR-00AMV

New Used
Request quote
MOQ 2 pc
View